Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 18-tooth pinion gear (1.0 metric pitch) fits...
View full details
This is the Traxxas pair of replacement Long White Spring for the GTR shocks.Features: White colored Made of metal For the Traxxas GTR Shocks Inc...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong an...
View full details
Screws, 3x10mm button-head machine (hex drive) (6) 3x10 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a...
View full details
Wheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x10mm) (2) 12 mm tall-offset wheel hex hubs with 2x10 mm axle pins (2) Replacement part ...
View full details
Rebuild kit, oil-filled shocks (o-ring, bladder, piston, shaft guide, E-clips, shock cap, shock rod end) renews 2 shocks Rebuild kit for LaTrax Te...
View full details
Traxxas Sway Bar Kit Slash 4X4 Features: For front and rear application to reduce chassis roll in turns and add stability Includes: Two thick an...
View full details
Stub axles, rear (2) Set of two replacement rear stub axles Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Lic...
View full details
Rod ends, long (6)/ hollow ball connectors (6) Set of six long rod ends with hollow ball connectors Replacement part for these models: Bandit® B...
View full details
Work Like a Prowith the Traxxas RC Stand! Designed to fit almost any 1/8 and 1/10 scale vehicle, the aluminum Traxxas RC stand is the perfect addi...
View full details
This is an optional Traxxas WideMaxx Steel Constant-Velocity Driveshaft Set. This is a complete upgrade, with steel constant-velocity driveshafts, ...
View full details
This is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full details
Screws, 3x20mm button-head machine (hex drive) (6) 3x20 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
This is a pack of 12 heavy duty body clips for Traxxas vehicles. Features: Black Color Curved End to Ease Removal Includes:(12) Body Clips Body ...
View full details
Spring, shock, white (GTR xx-long) (0.874 rate black) (1 pair) Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with ...
View full details
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) Upper and lower spring retainers for Ultra Shocks with 2-hole pi...
View full details
Battery hold-down plate (grey) / metal posts (2) / body clips (2) Gray battery hold-down with metal posts (2) and retaining clips (2). Replacemen...
View full details
Ring gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears Replacement part for these models: 1/16 E-Revo®...
View full details
Bumper, front Front bumper Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full details
Housings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full details
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full details
TRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
Screws, 3x6mm button-head machine (hex drive) (6) 3x6 mm button-head machine screws with hex drive heads. Set of six.
Driveshaft assembly, front or rear (2) Set of two driveshaft assemblies fit front or rear Replacement part for these models: 1/18 LaTrax® Desert...
View full details
This is the Traxxas pair of GTR XX-Long White Shock Springs with a 1.004 Blue Compression Rate.Features: White colored Made of metal 1.004 Blue Co...
View full details
Steering blocks, left & right Steering blocks, left & right Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full details
Top drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...
View full details
Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2) F...
View full details
Screws, 3x12mm button-head machine (hex drive) (6) 3x12 mm button-head machine screws with hex drive heads. Set of six. Replacement par...
View full details
Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full details
Traxxas Gears, Axle (Metal, Front & Rear)
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full details
Traxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full details
Slipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full details
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Silicone diaphragms (4) Silicone diaphragms (4) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis 4-Tec...
View full details
Traxxas X-Maxx HD Steering Block Set - uses TRA5196A 20x32x7 bearing
Heat sink Velineon 540XL motor (fits #3351R and #3461 motors)
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full details
These are the replacement nerf bars for the 2WD Traxxas Slash. replaces stock Traxxas #5823 not compatible with LCG versions of either the Slash 2...
View full details
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support) Differential gear set include output gears (2...
View full details
TRA5262 Air filter and pre-filter inserts, foam (high-volume) (3)
Screws, 3x12mm countersunk machine (6) (hex drive)
Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale long GTR shocks represent the...
View full details
This is a pack of four replacement Traxxas X-Maxx Suspension Pin Retainer. These retainers are used on the inside of the upper arms to secure the h...
View full details
Body mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...
View full details