Features:Steel constructionIncludes:One Differential Ring GearOne Differential Pinion GearRequires:Installation in differential assemblyTechnical S...
View full details
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Black.Features: Steel construction with black rubber seals Used as the outer b...
View full details
Bulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
Gear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2x14.8mm pin (1)) Replace the standard plastic gears in you...
View full details
This is a replacement 11-tooth heavy duty front differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full details
This is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full details
Spur gear, 50-tooth 50-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...
View full details
Screws, 4x12mm button-head machine (hex drive) (6) Set of six 4x12 mm button-head machine screws with hex-drive heads Replacement part for these ...
View full details
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full details
Heat sink, Velineon® 380 brushless motor, aluminum (blue-anodized) Add the blue-anodized aluminum heat sink to your Velineon 380 brushless motor t...
View full details
This is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full details
This is a set of left and right front shock towers for the Traxxas X-Maxx Monster Truck. Features: Two-piece molded composite plastic construction...
View full details
TRA5314 Body mounts, front & rear/ body mount posts, front & rear/2.5x18mm screw pins (4)/ 4x10mm BCS (1)
Designed specifically for X-Trucks™The aluminum Traxxas RC stand is the perfect addition to your workbench. Made from high-quality aluminum and ano...
View full details
Ball bearings, blue rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
This is a replacement 11-tooth heavy duty rear differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full details
This is an optional rear upper and lower bulkhead for the Traxxas X-Maxx. Designed for use with the 8S Torque-biasing Center Drive. Package contain...
View full details
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no...
View full details
Suspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...
View full details
This is the Hold Down Battery Set for the 2WD & 4X4 Traxxas Slash. Features: Black nylon construction Includes: (1) Battery Hold Down ...
View full details
Traxxas Slipper Pressure Plate & Hub Alloy Revo Features: Aluminum construction Includes: One slipper pressure plate One slipper hub Part C...
View full details
This is a 6 pack of Traxxas 2.5X8mm cap head screws.Features: Steel construction Black in color Cap head design Includes: Six 2.5X8mm cap head sc...
View full details
Carriers, stub axle (rear) (2) Standard rear stub axle carriers (2) Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full details
Shoulder screws, Ultra Shocks (3x12 hex drive) (6) Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. Replacement...
View full details
Spur gear, 54-tooth, steel (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. ...
View full details
Wheel hex clips (6) Set of six wheel hex clips Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
This is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock o...
View full details
Screw pin set (Rustler®/ Bandit/ Stampede®) Suspension screw pin set Replacement part for these models: Bandit® BIGFOOT® No. 1 Officially Licens...
View full details
Washers, 3x6mm metal (12) Pack of twelve 3x6 mm metal washers Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash...
View full details
Screws, 3x10mm countersunk machine (6) (hex drive)
Screws, 4x12mm countersunk machine (hex drive) (6) 4x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Heavy-Duty Chassis Brace Designed for the Extreme The heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG chassis and all R...
View full details
1400mah 11.1v 3-Cell 25C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top spee...
View full details
These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full details
Screws, 3x15mm countersunk machine (6) (hex drive)
This is the Traxxas Standard Servo Adapter for the X-Maxx Monster Truck. The X-Maxx servo adapter allows the installation of a standard-size servo...
View full details
This is a replacement Traxxas X-Maxx Left Lower Suspension Arm. Features: Factory Replacement Part Nylon Construction Includes:(1) Left Lower Sus...
View full details
Driveshaft assembly, front & rear, 6061-T6 aluminum (blue-anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Pr...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...
View full details
Screws, 4x15mm countersunk machine (hex drive) (6)
Spur gear, 60-tooth 60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help ...
View full details
FEATURESSteel construction, white in colorDab of paint on end of spring indicates compression rateINCLUDESTwo Long 0.892 Blue Rate GTR Shock Spring...
View full details
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full details
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details