This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full details
Body clips (12) (standard size) Standard-duty body clips. Sold as a pack of 12. Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®...
View full details
These are a pack of 12 replacement LaTrax Body Clips perfect for 1/18 scale vehicles.Features:Silver ColorCurved end to ease removalIncludes:12 Bod...
View full details
These are the body clips for the Traxxas E-Maxx and T-Maxx trucks.Features: Steel construction Natural polished color Includes: Twelve Body Clips...
View full details
Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks) Replace the stock screw pins with these heavy-duty steel suspen...
View full details
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings) Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. Replacement part for...
View full details
Cooling fan, Velineon¶© VXL-3s ESC The Velineon¶© VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum powe...
View full details
This is a set of 10x15mm ball bearings for use on the Traxxas Revo.Features: Steel Construction Shielded with blue rubber seals Includes: Two Bal...
View full details
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The front heavy-duty driveshaft come...
View full details
Wheel hubs, hex (2)/ stub axle pins (2) 12 mm composite hex wheel hubs (2) with axle pins (2). Replacement part for these models: BIGFOOT® No. 1...
View full details
Screws, 3x15mm button-head machine (hex drive) (6) 3x15 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Gear set, transmission, low range (crawl) (40.3:1 reduction ratio)/ pinion gear, 11-tooth Give your TRX-4M™ unstoppable torque with this low-range...
View full details
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The heavy-duty rear driveshaft comes ...
View full details
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torque...
View full details
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) 54-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Body clips, black (12) (standard size) Standard-duty black body clips. Sold as a pack of 12. Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1)) The slipper clutch rebuild kit refreshes ...
View full details
These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads.Feature...
View full details
Utility trailer/ trailer hitch (assembled)/ 3mm spring pre-load spacers (2)/ 2.5x8mm BCS (2) The TRX-4M™ 1/18 scale utility trailer stows all your...
View full details
Traxxas Led Light Set, Front & Rear, Complete (Includes Light Harness, 1.6X10mm Bcs (Self-Tapping) (2), 1.6X7mm Bcs (Self-Tapping) (2), Zip Tie...
View full details
Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4) Big Bore shocks provi...
View full details
Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) Piv...
View full details
Wheelie bar, assembled (black) (fits Slash®, Stampede®, Rustler®, Bandit® series) The patented Traxxas adjustable wheelie bar features four-positi...
View full details
Powerful, Realistic Winch Capability for Traxxas TRX-4 and TRX-6 The new Pro Scale Winch puts the TRX-4 and TRX-6 even further over the top as t...
View full details
Oil, differential (20M wt) (standard) Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in c...
View full details
This is a package of two 10x15mm Ball Bearings from Traxxas.FEATURES:Steel construction with black rubber dirt shieldsUsed with Traxxas vehicles, m...
View full details
This is a package of 3x12x5mm shoulder screws for many Traxxas vehicles.Features: Black steel construction Screws are half-threaded/half-smooth Ph...
View full details
Traxxas 48P Spur Gear (90T) Features: 48 pitch 90 tooth Designed for models with a slipper clutch Black plastic construction Includes: One spur...
View full details
Traxxas Led Light Set, Front & Rear, Complete (Includes Light Harness, 1.6X5mm Bcs (Self-Tapping) (4), Zip Ties (2)) (Fits TRA9712 Body)
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full details
Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Upgrade your slipper sh...
View full details
Body washers (8) Body washers reinforce the mounting point surface area to help prevent body clips from pulling through the body. Replacement par...
View full details
Ball bearings, black rubber sealed (5x11x4mm) (2) Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the Traxxas Rear Chassis Brace for the E-Revo and Summit.Features: Blue colored Made of durable aluminum For the Traxxas E-Revo and Traxxa...
View full details
This is an optional Traxxas Front Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 1/10 ...
View full details
TRA3678X Wheelie bar, assembled (blue) (fits Slash, Stampede, Rustler,Bandit series)