Heavy-Duty Chassis Brace Designed for the Extreme The heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG chassis and all R...
View full details
1400mah 11.1v 3-Cell 25C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top spee...
View full details
Adapter, standard servo (adapts standard servo to fit in X-Maxx®)Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, or XRT®...
View full details
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full details
These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full details
Screws, 3x15mm countersunk machine (6) (hex drive)
Screws, 4x15mm countersunk machine (hex drive) (6)
Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power han...
View full details
Driveshaft assembly, front & rear, 6061-T6 aluminum (blue-anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Pr...
View full details
FEATURESSteel construction, white in colorDab of paint on end of spring indicates compression rateINCLUDESTwo Long 0.892 Blue Rate GTR Shock Spring...
View full details
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...
View full details
Idler gear, steel (30-tooth) Replacement 30-tooth steel idler gear for the Magnum 272 transmission. Does not fit Magnum 272R transmission. Repla...
View full details
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits...
View full details
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the ...
View full details
Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft) X-Maxx® drive cup with 3x8 mm set screw. For use with 8s-spec heavy duty driveshaft ...
View full details
Mount, tie bar, front (1)/ rear (1) Front and rear tie bar mounts Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
Spur gear, 60-tooth 60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help ...
View full details
These are the Traxxas Ball Bearings for the LaTrax Rally Car.Features: Silver/grey colored Made of Steel for a long life time Replaces all bushing...
View full details
Slash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Everything to convert your Slash 4X4 Performance-proven by the Slash 4X4 Ultimate and 1/1...
View full details
Traxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...
View full details
This is an optional Traxxas CV Driveshaft Set, and is intended for use with the Traxxas T-Maxx 3.3, Revo 3.3, E-Maxx and E-Revo trucks. Traxxas Ste...
View full details
Spur gear, 38-tooth (1.0 Module) 38-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model...
View full details
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1) Keep your receiver antenna wire safe with this black antenna tube and vinyl cap...
View full details
aving spare hardware is a smart choice, this is a replacement LaTrax Rally Screw Set. This set includes the necessary replacement hardware for the ...
View full details
This is the Exo-carbon wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction, exo-carbon finish ...
View full details
Screws, 3x8mm flat-head machine (hex drive) (6) Set of six 3x8 mm flat-head machine screws with hex-drive heads Replacement part for these models...
View full details
ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to t...
View full details
Screws, 4x10mm countersunk machine (hex drive) (6)
Bulkhead, front (upper) Replacement front upper bulkhead Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handli...
View full details
This is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full details
Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount) Lower your Velineon brushless motor’s temperature...
View full details
This is the Traxxas Battery Hold-Down with Tall Retainers for the 1/10 scale Rally VXL and Slash LCG.Features: Black colored Made of plastic For t...
View full details
Stub axles, rear, heavy duty (2)/pins (2) Pair of rear heavy-duty stub axles with pins (2) Replacement part for these models: Ford Fiesta® ST Ra...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One left caster blockOne right caster blockRequires:Installation on SlashTechnical Spe...
View full details