TRA1242 SMALL/LARGE BEVEL GEARS
TRAXXAS
Differential bevel gear set (3-small & 2-large side bevel gears)
Differential bevel gear set (3-small & 2-large side bevel gears)
Spur gear, 70-tooth 70-tooth spur gear (48-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear rat...
View full details
This is the Composite Brake Disc for the Traxxas Nitro Slash SC, TRAD77**.FEATURES:Replaces worn brake discsINCLUDES:Brake DiscSteel Adapter
Screws, 4x22mm button-head machine (hex drive) (6)
Gear, 21-T pinion (48-pitch) / set screw 21-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
This is the Rear Chassis Brace Gear Cover & Wire Retainer for the Traxxas 4-Tec 2.0. Includes: (1) Gear Cover with Chassis Brace (1) Wire ...
View full details
Traxxas rubber shock boots have rubber construction, blue in color and flexible material. Includes: Two Blue rubber Shock Boots and Two black Plast...
View full details
Wedges, anti-squat (1.5 & 3.0 degree) (2 each)
Traxxas Body Clip Retainer Set (Blue) (4)
Includes: (2) 29mm Front Steel Shock Shafts, Chrome Finish Accessory Part For: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Ford GT...
View full details
Traxxas Spring, Shock (0.095 Rate) (1 Pair)
Hex wheel hubs, steel (2)/ axle pins (2.5x12mm) (2) 14 mm steel wheel hubs provide superior strength and durability and won't round off. Includes ...
View full details
This is the Rear Grey Bulkhead for the Traxxas Nitro Stampede. Features Sturdy grey nylon construction Includes One rear bulkhead for the Traxxas N...
View full details
These are non-adjustable camber link for the Traxxas Rustler and Stampede.Features: Black Plastic ConstructionIncludes: Two Short and Two Long Link...
View full details
Traxxas 4918 Servo Mounts Front/Rear This is a pair of Steering or Shifting Servo Mounts for the Traxxas T-Maxx. These mounts are what holds the s...
View full details
This is the 1st Speed Output Gear 36T for the Traxxas E-Maxx Truck.This gear is located in the gearbox.FEATURES:White nylon constructionINCLUDES:On...
View full details
This is a set of replacement Traxxas Rear Stub Axle Carriers, and are intended for use with the Traxxas Nitro Rustler, and Street Sport vehicles.
Cush drive key/ pin/ elastomer damper Cush drive key includes pin and elastomer damper Replacement part for these models: E-Revo® VXL Brushless ...
View full details
Screws, 4x12mm button-head machine (hex drive) (6) Set of six 4x12 mm button-head machine screws with hex-drive heads Replacement part for these ...
View full details
Screws, 3x10mm button-head machine (hex drive) (6) 3x10 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Screws, 3x8mm countersunk machine (6) (hex drive) 3x8 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
This is a replacement Traxxas 9 Tooth LaTrax Pinion Gear, for use with the LaTrax 1/18 Desert Runner and 1/18 Teton. Features:Factory Replacement G...
View full details
This is the Traxxas 14T Pinion Gear and Set Screw for the LaTrax Rally Car.Features: Silver/grey colored Made of steel For the LaTrax Rally Car I...
View full details
TRA5459 Revo T-Maxx Rubber Driveshaft Boots(2) Boots, driveshaft (rubber) (2) Replacement part for these models: E-Revo Brushless E-Revo Revo T-Maxx
Screws, 3x15mm cap-head machine (hex drive) (6) 3x15 mm cap-head machine screws with hex drive heads. Set of six. Replacement part for these mode...
View full details
Screws, 3x10mm cap-head machine (6) (no washer)
This is a 4x10mm button head screw set for the Traxxas Revo vehicle.Features: Steel construction that’s black in color Low-profile, button-head de...
View full details
Screws, 3x12mm countersunk machine (6) (hex drive) 3x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
This is the Draglink with Screws Set from Traxxas.FEATURES:Durably molded draglink.The metal screws have a phillips drive insert.Replacement steeri...
View full details
Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks) Replace the stock screw pins with these heavy-duty steel suspen...
View full details
Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench Set of six 3x10 mm cap-head machine screws with hex drive heads and lo...
View full details
Body clips, black (12) (standard size) Standard-duty black body clips. Sold as a pack of 12. Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
Screws, 4x12mm countersunk machine (hex drive) (6) 4x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Suspension pins, 31.5mm, chrome (2) w/ E-clips (4)
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full details
Screws, 3x15mm countersunk machine (6) (hex drive)
Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6) Set of six 3x15 mm cap-head machine screws with hex-drive heads and w...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS