Steering blocks, left & right (2) (requires 5x11x4mm bearings) Replacement left & right steering blocks. Requires 5x11x4 mm bearings. Re...
View full details
Gear, 14-T pinion (48-pitch) (fits 3mm shaft)/ set screw 14-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
Carriers, stub axle (rear) (2) Standard rear stub axle carriers (2) Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full details
Spur gear, 45-tooth (32-pitch) 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...
View full details
Wheel hex clips (6) Set of six wheel hex clips Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
Spur gear, 55-tooth 55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) 50-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
This is a Traxxas M0.8P, 52T spur gear.Features: M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears Includes: One M0...
View full details
Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3) The telemetry trigger magnet holders secures the tri...
View full details
This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES: Spring constructed of steel INCLUDE...
View full details
This is a front and rear differential housing for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Fastens to fro...
View full details
Wheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x10mm) (2) 12 mm tall-offset wheel hex hubs with 2x10 mm axle pins (2) Replacement part ...
View full details
This is a pack of two Traxxas Stock Wheel Hub Hexes intended for the Maxx Truck. This package also includes two 2.5x12mm pins. Features:Factory Re...
View full details
More information about Traxxas Mount Temperature Sensor TRA6535 This is the temperature sensor mount for the Traxxas TQi telemetry system.Features:...
View full details
This is the Traxxas steering servo cover plate for the Traxxas Revo 3.3.Features: Nylon construction that is black in colorIncludes: One Steering S...
View full details
This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full details
Body clip (mounting clip), angled, 90-degrees (black) (10) 90-degree black mounting clips are perfect for battery latches, making battery access q...
View full details
This is a pack of four replacement Traxxas TRX-4 Bumper D-Rings with mounting screws. Features: Factory Replacement Bumper D-Rings Red in Color I...
View full details
Traxxas Front Axles (2) Features: Steel construction Natural color Includes: Two front axles Specs: Length: 32mm (1.26") Diameter: 5mm Part C...
View full details
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
This is a set of replacement stub axle nuts for the Traxxas Traxx TRA8880. Features:Factory Replacement Part Includes:(4) Stub Axle Nuts
This is a replacement LaTrax 54 tooth Spur Gear. Features:Factory Replacement Spur Gear Includes:(1) 54T Spur Gear
Spur gear, 54-tooth (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
Spur gear, 60-tooth 60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help ...
View full details
Traxxas Steering Linkage 3x20mm Turnbuckle Fits: Traxxas Slash 4x4 Traxxas Stampede 4x4
Traxxas set of cylinder head gaskets are constructed of copper. Three different thickness allow you to taylor your compression. Includes: One each ...
View full details
This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full details
Traxxas Spring, Shock (GTM) (0.155 Rate) (1 Pair)
This is a Traxxas 61-Tooth Spur Gear factory replacement for the 1/18 scale LaTrax Desert PreRunner and LaTrax Teton. Includes: 1 61 tooth spur gear
This is a replacement Traxxas Maxx Transmission Input Shaft, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Features:Factory Repl...
View full details
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
This is a pack of 12 heavy duty body clips for Traxxas vehicles. Features: Black Color Curved End to Ease Removal Includes:(12) Body Clips Body ...
View full details
Screw pin, 3x10mm (6) Set of six 3x10 mm screw pins with hex-drive heads Replacement part for these models: TRX-4® 1972 Chevrolet® Blazer® High ...
View full details
Traxxas Servo Mount, Steering/ Servo Horn
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth spur gear (32-pitch) fits the 6814 center ...
View full details
Body mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...
View full details
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
TRA5228 Head protector, cooling head (1)/3x6mm CCS (5) (TRX 3.3)
Traxxas Spur Gear 32P 50T Features: Black plastic construction Includes: 32P 50T Spur Gear for the Slash 4x4 Specs: Pitch: 32P Teeth: 50T Par...
View full details
Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) 58-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
This is a replacement LaTrax Camber and Toe Link Set. This set includes four camber links and two toe links. Features:Factory Replacement Camber an...
View full details
Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) 76-tooth spur gear (48-pitch) for Torque Control slipper clutches...
View full details
This is a Traxxas 52T, 32P Spur Gear for use on the centerDifferential of the Slash 4X4. Features M0.8 pitch52 toothBlack plastic constructionCompa...
View full details
Ball bearings, black rubber sealed (5x8x2.5mm) (2) Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...
View full details
Gear, 12-T pinion (48-pitch)/ set screw
