TRA9361 Traxxas Springs, shock (red) (1.029 rate) (2)
TRAXXAS
TRA9361 Traxxas Springs, shock (red) (1.029 rate) (2) Fits: Traxxas Factory Five 33 hot rod coup Traxxas Factory Five 35 hot rod truck
TRA9361 Traxxas Springs, shock (red) (1.029 rate) (2) Fits: Traxxas Factory Five 33 hot rod coup Traxxas Factory Five 35 hot rod truck
Skid plate, roof (body) (black) (left & right)/ 3x8mm CS (4)Replacement part for these models:Hoss™ 4X4 VXL
Ball bearings, black rubber sealed (5x10x4mm) (2) Pair of 5x10x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the optional 12 Tooth Pinion Gear for the Traxxas X-Maxx.FEATURES:Hardened steel constructionReplaces stock 6491X 18T pinion gearCompatible...
View full details
This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5923Part Number: 5923 / TRA5923FitsSlayerSlayer Pro
TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)
This is the small rod end set for the Traxxas Revo.Features: Plastic construction that’s black in color Metal Pivot Balls Includes: Six Rod Ends ...
View full details
Traxxas Differential Cover, Front Or Rear (Black) (2)
This is a pair of replacement drive yokes for the Traxxas Revo. These yokes attach to the half shaft assemblies.Features: Black plastic constructio...
View full details
This is the Brake Yoke w/Pins for the Traxxas Revo.It is use on the Center/Front Driveshaft Assembly.FEATURES:Plastic Brake YokeSteel Brake Pins(ea...
View full details
These are the left and right differential housings for the Traxxas E-Maxx.Features: Constructed of plastic Replaces damaged or broken diff housing...
View full details
These are the Traxxas 4-Tec 2.0 Left and Right Stub Axle Carriers. These fit all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Fi...
View full details
This is the Center Driveshaft for the Traxxas 1/10 scale Telluride 4x4.FEATURES:Plastic construction, blue in colorINCLUDES:Center Driveshaft with ...
View full details
This is the Rear Axle Mount Set for Suspension Links for the TRX-6 by Traxxas. Includes: (1) Rear Axle Mount Set
This is the Offset Rod Ends for the Traxxas TRX-4 and TRX-6. Features: Plastic in Construction Includes: (4) Offset Rod Ends
This is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...
View full details
Traxxas Piston, damper (red) (4)/ e-clips (8)
This is a replacement Traxxas 4-Tec 2.0 Front and Rear Body Mount Set. Features:Factory Replacement Body Mount Set Includes:(1) Body Mount Set
Traxxas Gear Center Differential Revo Features: Nylon construction Includes: Gear, two ring seals, gasket and instruction sheet Fits: Traxxas ...
View full details
These are the wheelie bar wheels for the Traxxas 3.3 T-Maxx.Features: Constructed of hard plastic Axles constructed of steel Includes: Four wheel...
View full details
Traxxas Differential Cover, Front Or Rear (Grey) (2)
This is the Traxxas Battery Door for the TQi Transmitter.Features: Grey colored Made of plastic Fits two and four channel TQi transmitters Protect...
View full details
These are the rod ends for the 1/16 scale Traxxas Revo and Slash series.Features: Black nylon constructionIncludes: Eight Nylon Rod Ends Eight Nyl...
View full details
This is the Telemetry Expander Seal Kit for the Traxxas X-Maxx Monster Truck.FEATURES:Seals telemetry expander box and protects components from dir...
View full details
Traxxas Seal Kit Rx Box Features: Properly seals receiver box to minimize dirt and moisture exposure Includes: Silicone grease One Gasket Two Fo...
View full details
This is the Front and Rear Suspension Arm Mounts, and Hinge Pin Retainers for the Traxxas 4-Tec. Includes: (2) Front Suspension Arm Mounts (2) ...
View full details
This is a set of inner drive cups and screw pins for the Traxxas Ford GT 4Tec.
Traxxas Driveshaft extension kit, center (includes internal splined, long (2) and internal splined, medium (2)) (for use with TRX-4 Long Arm Lift Kit)
This is the Traxxas Communication Link/Telemetry Expander.FEATURES:For use with Traxxas telemetry componentsConnects the telemetry expander to the ...
View full details
This is the motor cover plate for the Traxxas 1/16 scale Fiesta and Kyle Busch Race Truck.Features: Composite constructionIncludes: Motor Cover Mo...
View full details
This is the housing for the front and rear differential on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes...
View full details
This is the Traxxas 1/10 Maxx Waterproof Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease Stock Replacement OnMaxx 4S
This is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...
View full details
This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally
Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...
View full details
This is the Replacement Steel Constant Velosity Driveshaft Rebuild Kit for Unlimited Desert Racer. Includes: (2) Drive Pin (2) Cross Pin
This is the optional 11 Tooth Pinion Gear for the Traxxas X-Maxx.FEATURES:Hardened steel constructionReplaces stock 6491X 18T pinion gearCompatible...
View full details
This is a replacement Idle Mixture Screw for theTraxxas TRX 2.5 Carb (TRAG5252).FEATURES:Pre-installed gasketINCLUDES:One NeedleSPECS:Length: 13.8 ...
View full details
This is the Rear Bumper and Rear Body Mount for the Traxxas 4-Tec 2.0 AWD Chassis and Ford GT. Includes: (1) Rear Bumper (1) Rear Body Mount ...
View full details
Traxxas Driveshaft Extension Kit, Center (Includes Internal Splined, X-Long (1), Internal Splined, XX-Long (1) And Internal Splined, Short (2))
This is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...
View full details
Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 17-tooth pinion gear (1.0 metric pitch) fit...
View full details
TRA4980X Housings, diff (ring side/ non-ring side) (1 each)/ pinion collar (1)
This is the Data Link Telemetry Expander from Traxxas that connects #6550X Telemetry Expander 2.0 to the #3485 VXL-6s or #3496 VXL-8s ESC. Incl...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS