TRA8261 Traxxas Piston, damper (red) (4)/ e-clips (8)
TRAXXAS
Traxxas Piston, damper (red) (4)/ e-clips (8)
Traxxas Piston, damper (red) (4)/ e-clips (8)
This is a replacement Traxxas 4-Tec 2.0 Front and Rear Body Mount Set. Features:Factory Replacement Body Mount Set Includes:(1) Body Mount Set
These are the wheelie bar wheels for the Traxxas 3.3 T-Maxx.Features: Constructed of hard plastic Axles constructed of steel Includes: Four wheel...
View full details
Traxxas Differential Cover, Front Or Rear (Grey) (2)
This is the Traxxas Battery Door for the TQi Transmitter.Features: Grey colored Made of plastic Fits two and four channel TQi transmitters Protect...
View full details
These are the rod ends for the 1/16 scale Traxxas Revo and Slash series.Features: Black nylon constructionIncludes: Eight Nylon Rod Ends Eight Nyl...
View full details
Traxxas Seal Kit Rx Box Features: Properly seals receiver box to minimize dirt and moisture exposure Includes: Silicone grease One Gasket Two Fo...
View full details
This is a set of inner drive cups and screw pins for the Traxxas Ford GT 4Tec.
Traxxas Driveshaft extension kit, center (includes internal splined, long (2) and internal splined, medium (2)) (for use with TRX-4 Long Arm Lift Kit)
This is the Traxxas Communication Link/Telemetry Expander.FEATURES:For use with Traxxas telemetry componentsConnects the telemetry expander to the ...
View full details
This is the motor cover plate for the Traxxas 1/16 scale Fiesta and Kyle Busch Race Truck.Features: Composite constructionIncludes: Motor Cover Mo...
View full details
This is the housing for the front and rear differential on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes...
View full details
This is the Traxxas 1/10 Maxx Waterproof Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease Stock Replacement OnMaxx 4S
This is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...
View full details
This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally
Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...
View full details
This is the Replacement Steel Constant Velosity Driveshaft Rebuild Kit for Unlimited Desert Racer. Includes: (2) Drive Pin (2) Cross Pin
This is the optional 11 Tooth Pinion Gear for the Traxxas X-Maxx.FEATURES:Hardened steel constructionReplaces stock 6491X 18T pinion gearCompatible...
View full details
This is a replacement Idle Mixture Screw for theTraxxas TRX 2.5 Carb (TRAG5252).FEATURES:Pre-installed gasketINCLUDES:One NeedleSPECS:Length: 13.8 ...
View full details
This is the Rear Bumper and Rear Body Mount for the Traxxas 4-Tec 2.0 AWD Chassis and Ford GT. Includes: (1) Rear Bumper (1) Rear Body Mount ...
View full details
This is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...
View full details
TRA4980X Housings, diff (ring side/ non-ring side) (1 each)/ pinion collar (1)
This is the Data Link Telemetry Expander from Traxxas that connects #6550X Telemetry Expander 2.0 to the #3485 VXL-6s or #3496 VXL-8s ESC. Incl...
View full details
This is a replacement Traxxas 4-Tec 2.0 Camber and Toe Link Set. Features:Factory Replacement Part Includes:(6) Camber and Toe Links
TRA5281 Control box battery cover w/ belt clip (EZ-Start 2)
Traxxas Differential Cover, Front Or Rear (Red) (2)
This is the replacement Differential Gasket/ X-Rings for the Traxxas E-Revo VXL Brushless. Includes: Differential Gasket X-Rings (2) 12.2x18x0.5 M...
View full details
This is the optional 13 Tooth Pinion Gear for the Traxxas X-Maxx.FEATURES:Hardened steel constructionReplaces stock 6491X 18T pinion gearCompatible...
View full details
This is a replacement Traxxas TRX-4 Rear Inner Portal Drive Housing Set. Features: Factory Replacement Part Nylon Construction Includes:(2) Rear...
View full details
This is the Rear Differential Housing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Includes: (1) Rear Differential Housing
Traxxas optional 45T spur gear is constructed of black nylon. INCLUDES: One 45T spur gear. This is listed in the manual as the 1st gear.
This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color Includes: (2) Diffe...
View full details
Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2)
This is a replacement Traxxas TRX-4 Front/Rear Outer Portal Drive Housing Set. Features: Factory Replacement Part Nylon Construction Includes:(2)...
View full details
Traxxas Differential Cover, Front Or Rear (Blue) (2)
These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...
View full details
This is the Traxxas left and right tail light housing, lens and decals set.Includes: Two tail light housing Two lens Left and right decals
This is a Traxxas Inner and Outer Bearing Retainer Set. Includes:2x Inner Bearing Retainers2x Outer Bearing Retainers
Ball bearings, black rubber sealed (4x10x4mm) (2) Pair of 4x10x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a replacement Traxxas TRX-4 Receiver Box Seal Kit, including a small tube of silicone grease.
Traxxas Trail Sights (Left & Right)/ Door Handles (Left, Right, & Rear)/ Front Bumper Covers (Left & Right) (Fits TRA9711 Body)
This is a replacement Traxxas Maxx Differential Carrier Case. This set also includes one x-ring gasket, two o-rings, and one 10.5x19.5x0.5 washer. ...
View full details
These are the optional orange rate GTR shock springs for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Steel construction that’s red in col...
View full details
TRA7666 Spring, shock (red) (GTR) (0.314 rate)(1 pair)
This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color Includes: (8) Rod Ends Spec...
View full details
Replacement center half shafts. Includes 2 shafts and 4 pin retainers. Replacement part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS