Cover, gear/ rubber gear cover plug/ 3x6 RM (2) Replacement gear cover for Magnum 272 transmissions. Includes clutch nut adjustment cover plug and...
View full details
Ball bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
Traxxas Shock mount, lower (extended travel, left & right/ 3x18mm BCS (2)
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
Traxxas Shock Tower Front Features: Made from black molded nylon For the Traxxas Stampede Specs: Height: 2 3/4" Thickness: 1/4" Width at base: 2...
View full details
Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 10-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
Gear, 16-T pinion (48-pitch) / set screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
This is the Suspension Pin Set for the Traxxas Slash 4X4. The hinge pins hold the suspension arms to the bulkheads.Features: Durable steel constru...
View full details
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crus...
View full details
Axle mount set (complete) (front & rear) (for suspension links) Axle mount set for attaching suspension links to TRX-4® front and rear axles ...
View full details
Y-harness, BEC The Y-harness allows you to power two high-voltage accessories at the same time such as the Pro Scale® winch and LED lighting syste...
View full details
Fuel line (610mm or 2ft) 24" fuel line Replacement part for these models: Jato® Nitro Rustler® Nitro Slash Revo® Slayer® Pro 4X4 T-Maxx® Access...
View full details
Replacement gear set for 2065A and 2065Tservos. Gears do not fit 2065 or 2065X servos. Replacement part for these models: 1/18 LaTrax® Desert Pr...
View full details
Tie bar, fiberglass The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installa...
View full details
Suspension pin set, extreme heavy duty, complete (front and rear) (2.5x26mm (4), 3x32mm (2), 3x40mm (2), 3x46mm (2)) (for use with #9180, 9181, 918...
View full details
Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2) Two 4x67 mm hardened steel inner suspension pins fit front or rear Replacement...
View full details
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
This is a set of eight Traxxas 5mm Black Serrated Steel Flanged Nylon Locking Nuts for the Unlimited Desert Racer. Features: Made of steelSerrated...
View full details
This is a shock spring set for the Traxxas 1/16 Summit with a 3.2 rate (Purple).Features: GTR shock springs for the 1/16 Summit Steel construction...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
Nerf bars, chassis (black) Pair of black chassis nerf bars Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Fo...
View full details
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatibl...
View full details
This is the shim set for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s silver in color adjusting roll centerIncludes: Fo...
View full details
Screw pins, 4x13mm (with threadlock) (4) Set of four 4x13 mm screw pins with hex-drive heads and threadlock Replacement part for these models: R...
View full details
Traxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Ball bearings, blue rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft) Rebuild kit for u...
View full details
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 16-tooth pinion gear (1.0 metric pitch) fi...
View full details
Ball bearings, blue rubber shield (5x8x2.5mm) (2) Pair of 5x8x2.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime o...
View full details
Rod Ends, short (6)/ hollow balls (6) Set of six short rod ends with hollow ball connectors Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
These are the Traxxas Unlimited Desert Racer Left and Right Number Plates.Stock Replacement OnUnlimited Desert Racer (UDR)
Skid plate, roof (body) (black) (left & right)/ 3x8mm CS (4)Replacement part for these models:Hoss™ 4X4 VXL
This is an optional Traxxas Single Motor Gear Cover, and is intended for use with the E-Revo model 5605. Traxxas makes it easy to convert from dual...
View full details
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW Differential carrier includes X-ring gaskets (2), ring gear gasket, and...
View full details
aving spare hardware is a smart choice, this is a replacement LaTrax Rally Screw Set. This set includes the necessary replacement hardware for the ...
View full details
Housings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full details
This is the battery compartment vent for the Traxxas E-Revo.Features: Nylon construction that is black in color Fits left or right side Includes:...
View full details
Traxxas tune pipe coupler and exhaust deflector set for the Revo. Allows for a connection between the Exhaust Header and the Tune Pipe. Silicone co...
View full details
This is the Telemetry Expander Seal Kit for the Traxxas X-Maxx Monster Truck.FEATURES:Seals telemetry expander box and protects components from dir...
View full details
This is a replacement Traxxas Maxx Transmission 22T Input Gear, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This pack includes...
View full details
