IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full details
Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multi-cell batteries) The ...
View full details
Traxxas Skid Plate Front Plastic Gray Features: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color Inclu...
View full details
Adapter, standard servo (adapts standard servo to fit in X-Maxx®)Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, or XRT®...
View full details
Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty rear outer...
View full details
TRA9581 Traxxas Carrier, differential/ differential bushing (metal)/ o-r
The Traxxas Long Chassis Front Bulkhead is a replacement intended for the Traxxas Rustler 4x4. However, it can also be used with 4x4 VXL kits equip...
View full details
Half-shafts (internal-splined (2)/external-splined (2))/ metal U-joints (4) Set of two half shafts includes internal shafts (2) and external shaft...
View full details
Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware Front and rear body ...
View full details
This is a replacement Traxxas TRX-4 Right Rear Axle Shaft.
Body reinforcement set (fits #7711 body) X-Maxx® body reinforcements provide added protection for your truck during extreme driving. These high-st...
View full details
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
This is the Rear Left Axle Shaft for the Traxxas TRX-4 and TRX-6. Features: Metal Construction Includes: (1) Rear Left Axle Shaft
Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 23-tooth pinion gear (1.0 metric pitch) fits...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 22-tooth pinion gear (1.0 metric pitch) fi...
View full details
Input shaft, transmission (cush drive) Transmission (Cush Drive) input shaft Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ul...
View full details
Traxxas Rustler 4X4 Roof Skid Plate. Package includes replacement skid plate and four 3x12mm cap head screws.
Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel Replacement hardened-steel internal gears for 2...
View full details
TRA9583 Traxxas Differential output cup, front or rear (hardened steel)
This is the Spool Housing, Spool Shaft and Bushing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Features: Molded Composite Housing & Bush...
View full details
Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 24-tooth pinion gear (1.0 metric pitch) fits...
View full details
TRA9519X Traxxas Mud guards, rear, blue (left and right)/ 3x15 CCS (2)
Traxxas 32P Heavy Duty Hardened Steel Pinion Gear (21)
Bumper, front/ bumper support Replacement front bumper with bumper support Replacement part for these models: Rustler® 4X4 Brushless Rustler® 4X...
View full details
TRA9537 Traxxas Steering blocks, left & right/ M4x0.7 NL (4)
Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgr...
View full details
Steering blocks, left & right Left and right steering blocks Replacement part for these models: Maxx® Slash® Maxx®
This is a set of replacement Traxxas molded composite toe links, and are intended for use with the Traxxas 1/16 Slash. Features: Plastic In...
View full details
Steering blocks, extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)Ac...
View full details
Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgr...
View full details
This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws.FitsX-Maxx 6SX-Maxx 8S
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits...
View full details
Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1)(assembled w/rod ends)/hollow balls (2)(See part 3741A for complete camber link ...
View full details
Bulkhead, front & rear / differential housing, front & rear Front and rear bulkheads with front and rear differential housing covers Repl...
View full details
This is a front or rear suspension screw pin set hardened steel by Traxxas. Includes Four 4x18mm pins Two 4x38mm pins Two 4x33mm pins Two 4x43mm p...
View full details
Ball bearings, blue rubber sealed (8x16x5mm) (2) Pair of 8x16x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
Carriers, stub axle (left & right) (requires 20x32x7 ball bearings) Left and right stub axle carriers. Required 20x32x7 bearings. Replacemen...
View full details
Traxxas Pinion gear, differential (12/47 ratio) (rear) (requires #10757 with either #10758 or 10760)
This is a set of left and right caster blocks for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Supports the d...
View full details
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 20-tooth (32-pitch) pinion gear is mach...
View full details
