Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Two long and two sho...
View full details
Toe links, molded composite, 100mm (89mm center to center) (black) (2) Pair of 100 mm (89 mm center to center) black molded composite toe links R...
View full details
This is the roof and front bumper lightbar for use on the Traxxas Summit Truck RTR.Features: Plastic construction that is chrome in colorIncludes: ...
View full details
FEATURES: Replaces missing or damaged brake cams Brake cam is blue aluminum Cam lever and grub screw are steel INCLUDES: One blue aluminum brake ca...
View full details
This is a replacement Traxxas 4-Tec 2.0 Battery Hold Down. Includes: (1) Battery Hold-Down (1) Battery Clip (1) Hold Down Post (1) Screw Pin (1) P...
View full details
Traxxas Battery Hold-Down Front/Rear 1/10 Rally VXL Features: Made of black plastic Includes: Three different pieces Fits: Traxxas Rally Traxx...
View full details
Traxxas Gear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x10.3 pins (5))
TRA9314 Traxxas Body mount, rear (for clipless body mounting)
Traxxas front and rear bumpers for use on the 1/16 E-Revo VXL 4WD RTR. Plastic construction. Black chrome plated.Requires: Installation on the vehicle
This is a replacement Traxxas 4-Tec 2.0 Body Mount Post and Slider Set. Features: Factory Replacement Part Nylon Construction Includes:(1) Front ...
View full details
Tray, radio/ drive shaft mount w/ pressure fitting
This is a replacement Traxxas Differential Gear Set, and is intended for use with the Traxxas 1/8 Scale Funny Car. This set includes the necessary ...
View full details
This is a set of two Traxxas Progressive Rate Rear Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjust...
View full details
Gear, idler/ idler gear support/ bearing (pressed in)
Roll Hoop/E-Z Start Plug Mount: Jato This is the Roll Hoop w/EZ Start Plug Mountfor the Traxxas Nitro Jato Stadium Truck. Features Nylon constructi...
View full details
FEATURES: Black nylon construction INCLUDES: One tank box REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 88mm (3.47")Width: 1...
View full details
This is a replacement Traxxas TRX-4 Transmission Gear Set.
These are the left or right half shafts for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that’s black in colorIncludes: ...
View full details
Wing, 1/16 E-Revo (black)/ decal sheet 1/16 scale E-Revo® wing with decal sheet Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®
This is the Traxxas Y-Harness, Servo and LED Light Set.Features: Black and red colored Made of durable material Includes:One Traxxas Y-Harness, S...
View full detailsTraxxas Wheel hubs, hex (2)/ hex clips (2)
Traxxas Shock Tower, Front, Extreme Heavy Duty, Gray (For Use With #9080 Upgrade Kit)
Traxxas Led Light Harness, Rear (Requires TRA2477 Wheelie Bar Mount)
Traxxas Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4 Long Arm Lift Kit)
Traxxas 32P Heavy Duty Hardened Steel Pinion Gear (22)
This is a set of two replacement stub axle carriers from Traxxas intended for the Maxx. Features: Traxxas Quality and Precision Factory Replacemen...
View full details
This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full details
This is a replacement Differential part set, intended for use with the Traxxas Summit Monster Truck. Includes: Heavy Duty Differential Carrier (1)...
View full details
Traxxas pivot balls and bushings for the E-Maxx and T-Maxx for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. This package include...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck. Accessory part for th...
View full details
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
These are the front and rear center half shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.Features: Nylon construction that’s black...
View full details
Traxxas Shock tower, rear, extreme heavy duty, orange (for use with #9080 upgrade kit)
Traxxas Transmission gears, two speed (for #9891 transmission)
Lower chassis, low CG (black) Change up the color on your low-CG-equipped 2WD Slash with this accessory lower chassis. Does not fit standard chass...
View full details
Upper chassis (gray) Replacement part for these models: Rustler® Brushless
Servo horn, steering, metal/ 3x14 BCS (1) Replacement steel servo horn for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1...
View full details
Pinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear) 13-tooth rear differential pinion gear. Use with 7779 4...
View full details
This is the Motor Mount Washers and Screws for the Traxxas X-Maxx. Features: Aluminum Construction Blue in Color Exact Fit Includes: (4) W...
View full details
