Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 23-tooth pinion gear (1.0 metric pitch) fits...
View full details
Traxxas Toe links, front (molded composite) (2)/ hollow balls (4) (71mm center to center) (for use with #10790 Mini Maxx® WideMaxx® suspension kit)
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
Traxxas Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)
Traxxas Pinion gear, differential (13/37 ratio) (rear) (requires driveshaft #10757, 10857, or 10858 with either slipper clutch #10758 or center dif...
View full details
Traxxas 32P Heavy Duty Hardened Steel Pinion Gear (22)
Traxxas 32P Heavy Duty Hardened Steel Pinion Gear (21)
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
Traxxas Shock tower, front, extreme heavy duty, blue (for use with #9080 upgrade kit)
Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 22-tooth pinion gear (1.0 metric pitch) fi...
View full details
This is a set of two replacement stub axle carriers from Traxxas intended for the Maxx. Features: Traxxas Quality and Precision Factory Replacemen...
View full details
This is a replacement Traxxas Front Bumper, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper Includ...
View full details
This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Caster Bl...
View full details
Traxxas X-Maxx HD Steering Block Set - uses TRA5196A 20x32x7 bearing
Mount, tie bar, front (1)/ rear (1) Front and rear tie bar mounts Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
Bulkhead, front & rear / differential housing, front & rear Front and rear bulkheads with front and rear differential housing covers Repl...
View full details
Traxxas Springs, shock (GTS) (rear) (0.54 rate) (2)
Body reinforcement set (fits #7711 body) X-Maxx® body reinforcements provide added protection for your truck during extreme driving. These high-st...
View full details
Bulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1) Left and right front bulkhead halves with 3x10 mm screws (4) Replaceme...
View full details
Traxxas Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
This is a replacement Traxxas Rear Bumper, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper Include...
View full details
This is the replacement Rear Upper Suspension Links for the TRX-6 Mercedes-Benz G 63 AMG 6X6. Features: Steel Includes: (2) Rear Upper Sus...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
Wing, 1/16 E-Revo (black)/ decal sheet 1/16 scale E-Revo® wing with decal sheet Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®
Traxxas Toe links, front (molded composite) (2)/ hollow balls (4) (51mm center to center)
This is a set of left and right caster blocks for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Supports the d...
View full details
Traxxas TRX-4 GTS Shock Springs allow you to fine tune the performance of your GTS shock equipped model. With a full range of spring rates availa...
View full details
Ball bearings, blue rubber sealed (8x16x5mm) (2) Pair of 8x16x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Servo horn, steering, metal/ 3x14 BCS (1) Replacement steel servo horn for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1...
View full details
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full details
This is a replacement Traxxas Front Bulkhead, and is intended for the Traxxas Rustler 4x4 and Slash 4x4 vehicles. Features: Factory Replacement Pa...
View full details
TRA9583 Traxxas Differential output cup, front or rear (hardened steel)
This is the Replacement Front Bumperset for the Unlimited Desert Racer. Includes: (1) Front Bumper (1) Bumper Support
This is a pack of two replacement Traxxas 5x63mm TRX-4 Front Upper Suspension Links. Features: Factory Replacement Upper Suspension Links 5x63mm ...
View full details
Traxxas Rustler 4X4 Roof Skid Plate. Package includes replacement skid plate and four 3x12mm cap head screws.
Traxxas front skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provi...
View full details
Traxxas Half Shaft Internal Splined XO-1 Features: Hardened steel construction Includes: Internal Splined Half Shaft Fits: Traxxas XO-1 Traxxa...
View full details
This is the Blue Lower Chassis for use with the Low CG Conversion Kit. Features: Plastic construction Blue in color Fastens under front section...
View full details
This is a long spring set for GTR shocks used on the Traxxas Summit Monster Truck.Features: Steel construction that’s red in color 5.4 damping rat...
View full details
