TRA8333 Suspension arms, front (left & right)
TRAXXAS
This is a replacement Traxxas 4-Tec 2.0 Front Suspension Arm Set. Features:Factory Replacement Part Includes:(2) Front Suspension Arms
This is a replacement Traxxas 4-Tec 2.0 Front Suspension Arm Set. Features:Factory Replacement Part Includes:(2) Front Suspension Arms
This is the Traxxas roof visor. Includes: Visor retainer Two visor lens Three 2.6x6 BCS Four 3x4 GS
Traxxas Chassis Braces Lower Gray (2) Features: Supports center of chassis Gray in color, constructed of hardened plastic Includes: Two Lower Ch...
View full details
This is a factory replacement Traxxas Hoss 4x4 VXL Battery Hold Down Set Features: Factory Replacement Battery Hold Down Black In Color Includes:...
View full details
Traxxas Traction boards, green/ mounting hardware
Traxxas package of four 17mm hub retainers. This is the new hub retainer pin that is used on the new TRA5853X & TRA6856X 17mm wheel adapter ass...
View full details
Description: Traxxas Servo SaverThis item package consists of the following Traxxas items. Servo saver/ servo saver spring/ servo horn, steering ...
View full details
This is a replacement opti-drive sensor assembly for the Traxxas Revo monster truck. This is the sensor that attaches to the transmission and deter...
View full details
Traxxas Insert, threaded steel (replacement inserts for #7748X TUBES) (includes (1) left and (1) right threaded insert)
Traxxas Rod ends (4) (assembled with steel pivot balls)
TRA9584 Traxxas Mount, center differential
This is a replacement stub axle for the Traxxas Traxx TRA8880. Features:Factory Replacement Part Includes:(1) Replacement Stub Axle
This is the Traxxas 4-Tec 2.0 Rear Bulkhead. This is used in both the Ford GT and Mustang GT versions.Fits4-Tec 2.0
This is a Driveshaft for the Traxxas E-Maxx.FEATURES:Steel constructionCan be used to replace a bent or damaged rear center driveshaftINCLUDES:One ...
View full details
TRA5233 Slide, carburetor (slide only for TRX 2.5, 2.5R)
Traxxas Fr Rt Upper & Lower Suspension Arms Slayer Features: Durable black nylon construction Includes: One Upper Right Front Suspension Arm...
View full details
This is the Replacement Battery Hold Down Set for the Traxxas E-Maxx Truck. These hold downs screw directly into the chassis.Features: Black nylon...
View full details
This is the Transmission Output Shaft for the T-Maxx 3.3.FEATURES:Steel constructionBlack colorINCLUDES:One Transmission Output Shaft for the T-Max...
View full details
Upper Arm (1) Lower Arm (1) for Left Rear: Slayer This is the Upper & Lower Left Rear Suspension Arm Setfor the Traxxas Slayer Pro 4WD Short Co...
View full details
Traxxas Rustler 4X4 Rear Bumper. Package includes replacement rear bumper and mount components. Features:Factory Replacement Bumper Components Incl...
View full details
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...
View full details
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Replace your non-adjustable ca...
View full details
Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade ki...
View full details
Traxxas Steering bellcranks (2)/ draglink (1)/ steering link (1)
Traxxas Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
This is a set of bumpers for a Drag Slash Features: Plastic Included: (2) Bumper
Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2) Steering bellcranks with support, se...
View full details
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the ...
View full details
Traxxas Bumper mount, rear/ bumper support
Traxxas Half shafts, center (internal splined, short (3) & internal splined, long (2))
Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 25-tooth pinion gear (1.0 metric pitch) fits...
View full details
Shock caps for Sledge® GT-Maxx® shocks with spring perches (2) and adjustment collars (2)Replacement part for these models:Sledge®
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Set of replacement rod ends with 16 long ends and 4 short ends. Inc...
View full details
Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are th...
View full details
Traxxas Mounts, chassis brace (front & rear)
Traxxas Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
This is a Traxxas Rear bumper mount and support for the X-Maxx. Increase the overall rigidity and structural integrity of your vehicle with this re...
View full details
PLATE, MOTOR Replacement blue aluminum motor plate Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Sla...
View full details
This is the rear suspension arm guards for the Stampede and Slash 4x4.Features: Black plastic constructionIncludes: Two Rear suspension arm guards...
View full details
Traxxas Stub axle assembly, outer (front or rear) (assembled with internal-splined half shaft)
Traxxas 4mm Aluminum Flanged Serrated Nuts (Orange) (4)
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS