TFE1593 Fast Eddy Traxxas TRX 3.3 Engine Sealed Bearing Kit
TRAXXAS
Fast Eddy Traxxas TRX 3.3 Engine Sealed Bearing Kit
Fast Eddy Traxxas TRX 3.3 Engine Sealed Bearing Kit
Hobby Details Traxxas 1/18 Teton Aluminum Rear Shock Tower - Blue - Replaces TRA7637
NOTE: Purchase with Traxxas Power Adapter, AC, USB-C (45W) (for North America)TRA2912
This is a pair of Traxxas optional red aluminum pushrods for the rocker arms on the REVO. These go between the rocker arms and the lower suspension...
View full details
These are the optional aluminum push rods for the Traxxas Slayer Pro 4WD Short Course Nitro RTR.Features: Aluminum construction with Nylon rod ends...
View full details
Convert your Traxxas Revo to forward only with this Forward Only Conversion Kit. All parts required to convert the Revo to forward only INCLUDES: O...
View full details
Traxxas Stub Axle, Front (2)/ Cross Pins (2)/ Drive Pins (4)
This is the aluminum rocker arm post set for the Traxxas Revo. It provides a pivot point for the suspension/shock rocker arms.Features: Aluminum c...
View full details
TRA9355 Traxxas Driveshaft, center, steel (266mm)/ pin/ support, center
Traxxas Gear, 27-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw
Traxxas Tires Mickey Thompson Baja Pro XS 2.4x1.0" (2)
Traxxas Driveshafts, Center, Assembled (Front & Rear) (Fits 1/18 Scale Vehicles With Long Wheelbase)
Wheel nuts, splined, 17mm, serrated (red-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
This is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full details
This is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full details
This is the Heavy Duty Lower Right Suspension Arm for the Traxxas X-Maxx Monster Truck. Features: Blue in color Heavy Duty Molded composite pla...
View full details
Suspension arms, front (right), heavy duty (upper (1)/ lower (1)) Heavy-duty E-Revo® suspension arms utilize our latest proprietary composite mat...
View full details
Traxxas Wire harness, LED lights/ zip ties (10)/ zip tie mounts (4) (fits #10350 & 10650 boat trailers)
Bulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite spe...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Steering bellcrank set features bellcrank, servo ...
View full details
This is the Heavy Duty Rear Right Suspension arms for the E-Revo VXL Brushless by Traxxas. Part # 8633X Features: Adjustable Wheelbase Heavy ...
View full details
Traxxas Suspension arms, orange, front/rear (left & right), heavy duty (2)
Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw The 20-tooth pinion gear (1.0 metric pitch) is machine...
View full details
This is an optional Traxxas "Long" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of...
View full details
New heavy-duty rear suspension arms for 2WD Slash feature an all-new design which incorporates our latest proprietary composite material. T...
View full details
This is the Unlimited Desert Racer Battery Door and Strap Set for Traxxas. Includes: (1) Battery Door (1) Battery Strap (2) Retainers (1) Latch
Traxxas Suspension arms, red, front/rear (left & right), heavy duty (2)
Traxxas Driveshaft assembly (left or right, front or rear) (1) (fully assembled, ready to install)/ screw pin (1)
Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal...
View full details
This is the Traxxas slipper clutch rebuild kit.Includes: Two steel disc Two friction insert 4.0mm NL Two spring washers
The Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set features a design which incorporates latest proprietary composite material. Traxxas...
View full details
This is the Traxxas Unlimited Desert Racer Lower Left Suspension Arm with Insert and Pre-Installed Hollow Ball.Stock Replacement OnUnlimited Desert...
View full details
This is a replacement Traxxas Unlimited Desert Racer Front Right Lower Suspension Arm, with included arm insert. This arm is only compatible on the...
View full details
This is a replacement Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft; shaft only.
This is replacement 17mm Splined, Serrated Wheel Nuts for the Traxxas X-Maxx. This is also an accessory part for the E-Revo VXL Brushless. Feat...
View full details
These are the Traxxas 17mm Serrated Splined Wheel Nuts, replacement part for the X-Maxx and can also be used on the VXL Revo. Features: Aluminum c...
View full details
Wheel nuts, splined, 17mm, serrated (black-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
This is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full details
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) Designed for extreme perform...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...
View full details
Traxxas Bumper, Front/ Bumper Mount, Front
Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front...
View full details
This is a front winch bumper that fits that Traxxas TRX-4® 1969-1972 Blazer with 8855 winch. Features: D-rings Fairlead Includes: (1) Fron...
View full details
This is the Front Plastic Skidplate for Traxxas. Features: Skidplate is Plastic in Construction Support Plate is Steel Includes: (1) Front...
View full details
This is a front winch bumper that fits that Traxxas TRX-4 1979 Bronco & Blazer with 8855 winch. Features: D-rings Fairlead Includes: (...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS