TRA8269G Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized)
TRAXXAS
Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ screw pin (4)
Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ screw pin (4)
Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-anodized) (4)/ screw pin (4)
Traxxas Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ screw pin (4)
FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Chassis Brace
These are aluminum hex wheel hubs for the T-Maxx and E-Maxx Truck kits.Features: Blue anodized Machined 6061 T-6 aluminum construction Packaged in...
View full details
Traxxas Motor mount cap, 6061-T6 aluminum (blue-anodized)
Traxxas Motor mount cap, 6061-T6 aluminum (gray-anodized)
Traxxas Motor mount cap, 6061-T6 aluminum (green-anodized)
Traxxas Motor mount cap, 6061-T6 aluminum (orange-anodized)
Traxxas Driveshaft assembly, front or rear, Maxx Duty steel core (left or right) (1) (fully assembled, ready to install)/ screw pin (1)
Traxxas Slash 4X4 Ultimate Chassis. This replacement chassis is intended for the Traxxas Slash 4X4 Ultimate. Package includes one chassis.
Traxxas Long Arm Lift Kit, Trx-4M, Complete
This is the Blue Anodized Aluminum Spring Retainer (adjuster) for the Traxxas GT-Maxx Shocks. Features: Anodized Aluminum Blue in Color In...
View full details
This is the Traxxas aluminum differential carrier for the E-Revo VXL Includes: Two X-ring gaskets Ring gear gasket Four spacers 12.2x18x0.5 MW shim
Accessory part for these models: Bigfoot© No. 1 Officially Licensed Replica Bigfoot© Officially Licensed Replica Ford F-150 Raptor Nitro Slash Ru...
View full details
This is a replacement Traxxas Low-CG Chassis, and is intended for use with the Traxxas 1/10 Rally Racer and the Slash 4x4 Ultimate 1/10 scale short...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
This is a replacement Traxxas Long Wheelbase Chassis. Even at maximum speed, E-Maxx feels stable and controlled thanks to its extra-long 335mm whee...
View full details
Replacement LED headlights with wire harness for 8090 LED light kits. Fits 9112-series bodies
Replacement LED headlights with wire harness for 8035 LED light kits. Fits 8010-series bodiesAccessory part for these models:TRX-4® 1979 Ford® Bronco®
Replacement LED headlights with wire harness for 8038 and 8039 LED light kits. Fits 8130-series bodiesAccessory part for these models:TRX-4® 1979 C...
View full details
Rebuild kit for the Velineon® 2000 kV brushless motor. Includes plastic endbell, 5x16x5 mm bearings (2), 5x7.5x.05 mm washer, 5x7.5x.1 mm washer, 5...
View full details
Traxxas Output gears, differential (2)
Traxxas Grille/ Grille Mount/ 3x10 BCS (7) (Fully Assembled, Includes Installed Headlight Lenses And Decals) (Fits #10111 Body)
Traxxas Roll Bar (Black)/ Mounts (Front (2), Rear (Left & Right))/ 2.6x12mm Bcs (Self-Tapping) (4) (Fits #9212 Body)
Traxxas LED Light Bar, Assembled (Fits #9262 Roll Bar)
Traxxas Lower Retainer, Shock, Brass (1 gram) (4)
Traxxas Skid plate, roof (body) (with LED lights) (fits #6717 body)
Traxxas LED tail light kit (fits #8311 body)
Traxxas Shocks, GTM (Assembled W/O Springs) (2)
Traxxas Side trim, left & right (chrome)/ retainers/ LED lens/ 2
TRA9113 Traxxas Decal sheets, Chevrolet Blazer (1969 -1972)
This Rear Upper Suspension Link is constructed out of Heavy Duty Steel measuring 7x206mm center to center and comes assembled with hollow balls. Fe...
View full details
This is the Titan 21-turn 550 motor for the Traxxas E-Maxx. The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. Th...
View full details
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
This is an optional Traxxas Slash 2WD LCG Chassis. This grey chassis will allow you to personalize the look of your Traxxas Slash 2wd, Raptor, or R...
View full details
Hobby Details Hex Driver Tip Set - Hurricane 4pcs (1.5/2.0/2.5/3.0mm x 78mm length) - Titanium Coated
Hobby Details Nut Driver Tip Set - Hurricane 4pcs (4.0/5.5/7.0/8.0mm, 100mm length) - Titanium Coated
This is Traxxas TRX-4 2021 Ford Bronco Front Rear Inner Fenders Set. Features: For: Traxxas TRX-4 2021 Ford Bronco Material: Plastic Color: Bla...
View full details
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full details
Accessory part for these models:X-Maxx®
Traxxas Bulkhead, rear (lower)/ motor mount washers (steel)Traxxas Bulkhead, rear (lower)/ motor mount washers (steel)
This is a replacement Traxxas Maxx Front Ring and Pinion Gear, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck.
Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handli...
View full details
This is a replacement decal sheet intended for the Mercedes-Benz G 500 4x4² TRX-4 Body. Features:Factory Replacement Decal Sheet Includes:(1) Compl...
View full details
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS