TRA3476 Traxxas Cooling Fan Kit (With Shroud) (Fits #3483 Motor)
TRAXXAS
Traxxas Cooling Fan Kit (With Shroud) (Fits #3483 Sledge Motor)
Traxxas Cooling Fan Kit (With Shroud) (Fits #3483 Sledge Motor)
Traxxas Drive Cup, Steel, Extreme Heavy Duty (2)/ 4X17mm Screw Pins, Heavy Duty (2) (Machined, Heat Treated)
Traxxas Steering Blocks, Left & Right/ Caster Blocks (C-Hubs), Left & Right/ 20x32x7mm Bearings (2)/ 15x24x5mm Bearings (2)
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Orange Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped w...
View full details
Traxxas Servo Mount, 6061-T6 Aluminum (Red-Anodized)
Traxxas Sway bar kit (front and rear) (includes front and rear sway bars and adjustable linkage)
Traxxas Servo Mount, 6061-T6 Aluminum (Blue-Anodized)
Replacement part for these models: Revo Accessory part for these models: Revo Summit Lightweight Aluminum Turnbuckles 30% lighter than steel, ...
View full details
Traxxas TRX Pro.15 to TRX 2.5/2.5R upgrade kit for Nitro Rustler, Nitro Sport (incl. SE), and Nitro Stampede
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Green Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped wi...
View full details
Replacement metal gear set for 2280 servo Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Drag Slas...
View full details
Take your 4-Tec® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with ...
View full details
Traxxas Servo Mount, 6061-T6 Aluminum (Green-Anodized)
Traxxas Servo Mount, 6061-T6 Aluminum (Dark Titanium-Anodized)
TRA9539R Traxxas Shock tower, front, 6061-T6 aluminum (red-anodized)
TRA9539T Traxxas Shock tower, front, 6061-T6 aluminum (orange-anodized)
TRA9539G Traxxas Shock tower, front, 6061-T6 aluminum (green-anodized)
TRA9539A Traxxas Shock tower, front, 6061-T6 aluminum (gray-anodized)
This is an optional upgrade Traxxas TRX-4 Motor Plate in Anodized Aluminum. Features: High Strength Aluminum Construction Anodized Finish Availa...
View full details
Traxxas Body conversion kit, 1/18 scale TRX-4MT Bigfoot No. 1 (includes front grille, engine detail & decals) (fits #9812 body)
This is an optional Traxxas Wheelie Bar, for use with the Traxxas Maxx. This wheelie bar features installed wheels, but requires installation. Mo...
View full details
This is a replacement Traxxas Center Differential Output Gear Set. These hardened steel gears are for use in the center differential only. Feature...
View full details
This is a Traxxas Link Set with 5x117mm Steering Link, 5x60mm Draglink, and a 5x63mm Panhard Link for the TRX-4 Scale and Trail Crawler. These li...
View full details
Traxxas Pro .15 to TRX 2.5 engine conversion has a tune Pipe, bellcrank, & Throttle Servo Horn made of plastic. Linkage wire made of steel. Spe...
View full details
The Revo©-Spec Torque-Control slipper clutch upgrade kit fits T-Maxx¶© Classic, S-Maxx, and SportMaxx trucks equipped with the original T-Maxx styl...
View full details
Traxxas Wheelie bar, assembled (fits Maxx or Maxx Slash)
Traxxas Carriers, Stub Axle (Rear) (Left & Right)/ 20x32x7mm Bearings (2)/ 15x24x5mm Bearings (2)
Traxxas Shock shaft, 72mm (GT-Maxx) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)
Traxxas Front light harness, Ford Bronco (2021) (requires #6592 lighting power module and #6593 distribution block)
Traxxas Shock shaft, 80mm (GT-Maxx) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Differential Output Gears. These diff output gears are made from hardened steel. Features:...
View full details
Traxxas Motor mount, aluminum (upper and lower)/ motor mount spacer/ hardware
This left and right 1972 Chevrolet Blazer side trim with upper and lower rear trim, left, right, and rear retainers, 23 2.6x8 BCS, and five self-ta...
View full details
TRA8860 Traxxas Spool shaft assembly, winch
This is a pack of four optional Traxxas Anodized Aluminum Wheel Hub Hexes intended for the Maxx Truck. This package also includes four 4x13mm scr...
View full details
This is a pack of four optional Traxxas Anodized Aluminum Wheel Hub Hexes intended for the Maxx Truck. This package also includes four 4x13mm scr...
View full details
This is an optional Traxxas Unlimited Desert Racer Rear LED Light Bar. Brake lights should function like brake lights. That’s why the Desert Racer’...
View full details
Clutch bell, hardened steel (20-tooth) (32-pitch) (N. Hawk/Buggy/Street) ¶ÿ Accessory part for these models: TRX Pro .15
This is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full details
Traxxas Dirt Oval Gray Front Wheels w/ Hoosier Tires (2)
Traxxas Toe Links Slayer Features: 7075-T6 aluminum construction Fits front or rear Anodized Red Includes: Two Toe Links Eight Ball Ends One 7mm...
View full details
These are the optional tubes lightweight aluminum turnbuckles for the Traxxas T-Maxx.Features: 30% lighter than stock steel toe links 4 times stif...
View full details
This is a pack of four optional Traxxas Aluminum GTX Threaded Collars for the Traxxas X-Maxx. These hard anodized, PTFE-coated aluminum upper sprin...
View full details
This is set of four Traxxas X-Maxx GTX Shock PTFE-Coated Aluminum Spring Retainer Adjusters. These are threaded and mount on the shock body to allo...
View full details
These are the optional aluminum pushrods for use on the Traxxas 1/16 scale Slash vehicles.Features: Aluminum construction that’s in a anodized red ...
View full details
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3) Roller clutch (one-way bearing) includes 6x8x0.5 washer. Fits TR...
View full details
This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...
View full details
This is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS