These are the Front and Rear Body Mounts for theTraxxas Telluride 4x4 from Traxxas, TRAD91**.FEATURES:Constructed of plastic, black in colorINCLUDE...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
Stub axle, front, steel-splined constant velocity (1) Replacement steel front stub axle for Traxxas steel CV driveshafts (6851R). Accessory part ...
View full details
This is the Mounts for the Traxxas RPM Sensor (Nitro Engines). Features:  Plastic and metal construction  Includes:  (3) Different plasti...
View full details
This is a pair of Traxxas SCT Off-Road Racing Tires in S1 Compound with Foams Mounted and Glued on SCT Black Orange-Beadlock Dual-Profile Wheels fo...
View full details
Springs, front (white) (progressive rate) (2) Pair of white progressive-rate springs for Traxxas long Ultra Shocks are custom-wound to provide res...
View full details
CHASSIS, LOW CG (BLACK) Change up the color on your low-CG-equipped 2WD Slash with this black chassis. Low-CG chassis do not fit standard 2WD Slas...
View full details
This is the battery compartment door for the Traxxas E-Revo.Features: Nylon construction that is black in colorIncludes: One Battery Compartment Door
These are the differential and transmission gaskets for the Traxxas Nitro Jato Stadium Truck.Features: Rubber construction that’s black and blue in...
View full details
This is a set of rod ends for the Traxxas Revo. They are to be used on the rear toe-link rods only.Features: Plastic construction that’s black in c...
View full details
Traxxas optional red aluminum pushrods for the rocker arms for the REVO. These go between the Rocker Arms and the Lower Suspension Arms. **Must be ...
View full details
This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES: Spring constructed of steel INCLUDE...
View full details
Traxxas pair of driveshafts, outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime U-joint pins are held capt...
View full details
Traxxas rear plastic skidplate for the T-Maxx attaches to and protects chassis and supports the rear bulkhead. Skidplate is gray in color INCLUDES:...
View full details
TRA4914R Body mount posts, front (2)/ body mount, rear/ body mount screw pins (4)
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full details
Flywheel (N. Rustler/Sport/Stampede/T-Maxx/Revo/Jato/Slayer) Replacement part for these models: Nitro Rustler® Revo® T-Maxx® TRX® 2.5R TRX® 3.3 T...
View full details
Air filter (complete with rubber base & foam insert) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® ...
View full details
Traxxas Cap Head Machine Screw 3x32mm (6) Features: Black finish Steel construction Cap head design Includes: (6) 3X32mm cap head machine screws...
View full details
Traxxas six pack of 3X28mm cap head screws have a zinc finish and metal construction. Includes: (6) 3X28mm cap head screws(6) lock washers(6) washe...
View full details
TRA3959 Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)
These are the replacement bulkhead cross braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts.Features: Black nylon...
View full details
Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw 26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
This is a replacement Losi 12x24x6mm Outer Axle Bearing Set, and is intended for use with the Losi 5IVE-T.
Product Details This high-quality Button Head Screw is manufactured from super-tough material for long-lasting durability. Features: Button hea...
View full details
OVERVIEW: This XT90 Male to Female T-Plug Charging Adaptor allows you to charge your XT90 equipped battery back using a charger that has a T-Plug o...
View full details
Product Details These super-strong CVD Axles will provide a strong and reliable direct replacement part for your kit items. Features Super-toug...
View full details
¶ôǨ Product Manual¶ôǨ¶ôǨ ¶ôǨ
Lane change curve left, In to Out.Contents :1 - standard straight with lane change1 - 1/60 curve with lane changeTrack connection clipsCan be used ...
View full details
Pro-Line 1/30 Aztek Front/Rear Mounted Black Clobber (4) for Axial SCX30
Estes Rockets C6-7 (3 ea) - Bagged 3 - C6-7 Engines 4 - Starters 4 - Starter Plugs DESCRIPTION The Estes B6-7 engine is an upper stage engine de...
View full details
Traxxas Toe links, front (molded composite) (2)/ hollow balls (4) (61mm center to center)
Traxxas LED light kit, Mini Maxx, complete (includes front & rear bumpers with LED lights, roof skid plate with LED lights, 3-volt accessory po...
View full details
This set of Aluminum Spindles for the Losi Micro-B is made of high strength 6061 anodized aluminum and is black anodized with silver edging for goo...
View full details
Hot Racing heavy duty stainless steel skid plate for use on the Arrma 1/18 Grom.In The Box (1) Stainless Steel Front Skid Plate Heavy Duty Stainles...
View full details
In The Box (1) Dunlop MX14 Rear Tire Mounted on Black Bullyspoke Wheel (1) Closed Cell Insert OverviewThis is a Dunlop MX14 Rear Tire for the Losi®...
View full details
Save 57%
Whether you are headed to the track, your favorite bashing spot or just need to store your rig, the On Point RC Car Bag is the perfect tool for the...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
