TRA5566 Input shaft (slipper shaft)/ slipper shaft spacer
TRAXXAS
This is the Input Shaft and Spacer for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionBlack in color INCLUDES:One Input Shaft (Sl...
View full details
This is the Input Shaft and Spacer for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionBlack in color INCLUDES:One Input Shaft (Sl...
View full details
Traxxas engine mount and hardware is constructed of metal and silver in color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x...
View full details
This is the Fuel Tank Rebuild Kitfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Nylon, Rubber and Metal ConstructionBlue, Black, and Silver in C...
View full details
Traxxas Tuned Pipe Resonator Jato 3.3. The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the chassis The single-...
View full details
These are the left and right 25 degree aluminum steering blocks for the Traxxas Nitro Jato Stadium Truck.Features: Aluminum construction in natural...
View full details
These are the rear left and right suspension arms for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInclud...
View full details
Traxxas left and right caster and steering blocks are constructed of nylon and black in color INCLUDES: One Left and Right 30 Caster Blocks One Lef...
View full details
This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color Includes: (2) Diffe...
View full details
This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color Includes: (8) Rod Ends Spec...
View full details
Traxxas optional Wheelie Bar Mount for all versions of the Traxxas Revo. Constructed of black hardened plastic. Installs at rear of chassis to hold...
View full details
Traxxas rubber shock boots have rubber construction, blue in color and flexible material. Includes: Two Blue rubber Shock Boots and Two black Plast...
View full details
Stub Axle,Steel:Revo,TMX 3.3,EMX,SLY This is a pair of replacement Stub Axles for the Traxxas Revo.The wheels attach to the axles. Features Steel c...
View full details
Traxxas spring shock GTR 4.1 rate tan for the Revo. Green tension shock spring set for the Revo GTR Shocks. These springs are installed on the shoc...
View full details
TRA5433 Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)
Traxxas reverse kit adds mechanical reverse to the Revo. All mechanical reverse components including the #2060 sub-micro servo and illustrated inst...
View full details
Traxxas Response Pro 3.8" Tires On Dish Wheels (2) Features: Soft rubber compound design tires are preglued to white dished 3.8" (96mm) wheels Dir...
View full details
Traxxas transmission output shaft for the Revo. Constructed of black metal. Specs:Overall length: 3-3/8 (85mm)Diameter: 1/4" (6mm)
Traxxas chassis brace is constructed of 0.12 (3mm) thick 6061 T-6 aluminum and anodized blue in color. INCLUDES: Chassis Brace and 4x16mm hex head ...
View full details
TRA5336A Bumper, rear (chrome)/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)
TRA5335A Bumper, front (chrome)/ bumper mount, front/ 4x10mm BCS (2)/3x25mm BCS (2)
TRA5316 Roll hoop, plastic/ transmission skid guard, plastic
This is the Blue Anodized Header for Nitro Rustler and Nitro 4-Tec 2.5.FEATURES:Blue anodized headerCooling fins on mounting flangeINCLUDES:One hea...
View full details
This is a set of four Traxxas Cush-Drive Elements for the T-Maxx with TRX 2.5 Engine and other vehicles using the EZ-Start 2 Electric Starting Syst...
View full details
Traxxas power tune cooling head has a blue anodized head with plastic head protector. Eleven cooling fins. The Powertune machined aluminum cooling ...
View full details
Traxxas package of replacement cover plates and seals are constructed of black plastic. These are used on the Revo 3.3 equipped with the forward on...
View full details
Traxxas Output Gear Assembly Forward Features: Replaces stock forward output gear. Constructed of plastic. Includes: One 26 tooth forward output...
View full details
This is the Output Shaft and Spacer for the Traxxas T-Maxx4WD Radio Control Monster Truck.This shaft installs between the output gear and the clutc...
View full details
This is the Transmission Skidplate for theTraxxas New T-Maxx 4WD Nitro Monster Truck RTRFEATURES:Attaches to and protects chassis and transmissionS...
View full details
Traxxas optional aluminum brake adapter for the T-Maxx monster truck.; Features blue aluminum construction.; This is to be used with the heavy duty...
View full details
TRA4965 Brake pads (2)/ brake piston/ 3x15mm cap hex screws (2)
FEATURES: Metal construction Pre-bent hanger wireINCLUDES: One metal hanger wire
These are aluminum hex wheel hubs for the T-Maxx and E-Maxx Truck kits.Features: Blue anodized Machined 6061 T-6 aluminum construction Packaged in...
View full details
Traxxas heavy duty half shafts (short) for the T-Maxx 2.5. Constructed of black nylon. These come out of either side of the transmission. This pack...
View full details
This is a pair of replacement Steering Bellcranks for the Traxxas T/E-Maxx Monster Trucks. These bellcranks bolt to the chassis and the bellcrank p...
View full details
INCLUDED: One set of axle carriers and steering blocks for the T-Maxx. Set of Axle Carriers and Steering Blocks for the T-Maxx 4WD Radio Control Mo...
View full details
This is a 10x19mm ball bearing from Traxxas. It is primarily for used in the 2-speed Spur Gear on the Traxxas T-Maxx.Features: Ball bearings reduc...
View full details
This is a set of two Traxxas Pro-Trax 2.2 Rear Buggy Tires with Inserts. These tires feature a spiked tread design, and soft compound rubber constr...
View full details
This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...
View full details
This is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...
View full details
Sold out
Features:Made of 2mm thick wire, ends are prebent to attach to tuned pipe and chassis.Includes:One Pipe Hanger for the Traxxas Nitro Rustler and Ni...
View full details
This is the Plastic Tuned Pipe for use with the Traxxas 2.5 and 2.5R engine equipped vehicles.FEATURES:Black plastic constructionDirect replacem...
View full details
Traxxas 4429 Bumper Rear/Battery Box/Box Cover/3x15mm This is the Rear Bumper and Battery Box Cover for the Traxxas Nitro Slash Short Course Racing...
View full details
This is the replacement rear bulkhead for the Traxxas Nitro Stampede.Features: Sturdy black nylon constructionIncludes: One rear bulkhead for the T...
View full details
This is the brake disc and shaft adapter for the Traxxas Nitro Rustler and Nitro Stampede.Features: Plastic/Fiber-reinforced Brake Disc Steel Cent...
View full details
Adapter nut, clutch (not for use with IPS crankshafts) Replacement part for these models: TRX® 2.5R TRX® 3.3 TRX® Pro .15
Bumper (rear)/ battery box/ body clips (2), EZ-Start mount, 3x10CST (2) Replacement part for these models: Nitro Rustler®
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS