TRA10726-RED Traxxas Battery hold-down (red-anodized 6061-T6 aluminum)
TRAXXAS
Traxxas Battery hold-down, hold-down post (red-anodized 6061-T6 aluminum)/ 3x15mm BCS (with threadlock) (1)
Traxxas Battery hold-down, hold-down post (red-anodized 6061-T6 aluminum)/ 3x15mm BCS (with threadlock) (1)
ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to t...
View full details
Ring gear, differential/ pinion gear, differential Differential ring and pinion gears Replacement part for these models: E-Revo® VXL Brushless
Gear set, metal, high-speed (for 2070, 2075 servos) Replacement high speed metal gear set for 2075R servo. Gears may also be used to upgrade 2070,...
View full details
Bulkhead, rear (upper & lower), center differential (replacing #7727 & #7728 requires #5108 ball bearings (2)) Rear upper and lower X-Maxx...
View full details
These are the optional aluminum push rods for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR.Features: Aluminum construction that’s anodized ...
View full details
Traxxas Battery hold-down, hold-down post (green-anodized 6061-T6 aluminum)/ 3x15mm BCS (with threadlock) (1)
This is the Traxxas TRX-4 Scale Crawler Differential Gear Set. This set consists of 2 diff output gears, 4 spider gears, and 2 spider gear shafts.I...
View full details
Traxxas Chassis (162mm long battery compartment) (fits flat style battery packs)
Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
Wheelie bar, assembled (fits all T-Maxx®/E-Maxx® trucks) The Maxx® wheelie bar has 4 snap-in adjustment positions that allow you to choose how ext...
View full details
This is the Exhaust Header for the Traxxas T-Maxx Kit with the .15 engine.This part is attached to the engine.FEATURES:Blue anodized aluminum heade...
View full details
FEATURES:Machined Light-Weight Aluminum construction, anodized blueINCLUDES:Aluminum Servo Mounts (left and right)4 3x10 Buttonhead Cap Screws4 3x8...
View full details
Wheel washers, machined aluminum, red (4) Upgrade your Maxx® Slash® wheels with this set of four brightly anodized aluminum wheel washers. Access...
View full details
Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ screw pin (4)
Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-anodized) (4)/ screw pin (4)
Traxxas Traxxas Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ screw pin (4)
FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Chassis Brace
These are aluminum hex wheel hubs for the T-Maxx and E-Maxx Truck kits.Features: Blue anodized Machined 6061 T-6 aluminum construction Packaged in...
View full details
Traxxas Motor mount cap, 6061-T6 aluminum (blue-anodized)
Traxxas Motor mount cap, 6061-T6 aluminum (gray-anodized)
Traxxas Motor mount cap, 6061-T6 aluminum (green-anodized)
Traxxas Motor mount cap, 6061-T6 aluminum (orange-anodized)
This is the Traxxas aluminum differential carrier for the E-Revo VXL Includes: Two X-ring gaskets Ring gear gasket Four spacers 12.2x18x0.5 MW shim
Accessory part for these models: Bigfoot© No. 1 Officially Licensed Replica Bigfoot© Officially Licensed Replica Ford F-150 Raptor Nitro Slash Ru...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
This is a replacement Traxxas Long Wheelbase Chassis. Even at maximum speed, E-Maxx feels stable and controlled thanks to its extra-long 335mm whee...
View full details
Replacement LED headlights with wire harness for 8090 LED light kits. Fits 9112-series bodies
Replacement LED headlights with wire harness for 8035 LED light kits. Fits 8010-series bodiesAccessory part for these models:TRX-4® 1979 Ford® Bronco®
Replacement LED headlights with wire harness for 8038 and 8039 LED light kits. Fits 8130-series bodiesAccessory part for these models:TRX-4® 1979 C...
View full details
Rebuild kit for the Velineon® 2000 kV brushless motor. Includes plastic endbell, 5x16x5 mm bearings (2), 5x7.5x.05 mm washer, 5x7.5x.1 mm washer, 5...
View full details
Traxxas Output gears, differential (2)
Traxxas Grille/ Grille Mount/ 3x10 BCS (7) (Fully Assembled, Includes Installed Headlight Lenses And Decals) (Fits #10111 Body)
Traxxas Roll Bar (Black)/ Mounts (Front (2), Rear (Left & Right))/ 2.6x12mm Bcs (Self-Tapping) (4) (Fits #9212 Body)
Traxxas LED Light Bar, Assembled (Fits #9262 Roll Bar)
Traxxas Lower Retainer, Shock, Brass (1 gram) (4)
Traxxas Skid plate, roof (body) (with LED lights) (fits #6717 body)
Traxxas LED tail light kit (fits #8311 body)
Traxxas Shocks, GTM (Assembled W/O Springs) (2)
TRA9113 Traxxas Decal sheets, Chevrolet Blazer (1969 -1972)
This Rear Upper Suspension Link is constructed out of Heavy Duty Steel measuring 7x206mm center to center and comes assembled with hollow balls. Fe...
View full details
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
Whether you're replacing original equipment or giving your rig a new look, nothing beats Traxxas wheels for durability, precision and style. The mu...
View full details
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full details
This is Traxxas TRX-4 2021 Ford Bronco Front Rear Inner Fenders Set. Features: For: Traxxas TRX-4 2021 Ford Bronco Material: Plastic Color: Bla...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS