TRA9539G Traxxas Shock tower, front, 6061-T6 aluminum (green-anodized)
TRAXXAS
TRA9539G Traxxas Shock tower, front, 6061-T6 aluminum (green-anodized)
TRA9539G Traxxas Shock tower, front, 6061-T6 aluminum (green-anodized)
TRA9539A Traxxas Shock tower, front, 6061-T6 aluminum (gray-anodized)
This is an optional upgrade Traxxas TRX-4 Motor Plate in Anodized Aluminum. Features: High Strength Aluminum Construction Anodized Finish Availa...
View full details
This is a replacement Traxxas Center Differential Output Gear Set. These hardened steel gears are for use in the center differential only. Feature...
View full details
This is a Traxxas Link Set with 5x117mm Steering Link, 5x60mm Draglink, and a 5x63mm Panhard Link for the TRX-4 Scale and Trail Crawler. These li...
View full details
Traxxas Pro .15 to TRX 2.5 engine conversion has a tune Pipe, bellcrank, & Throttle Servo Horn made of plastic. Linkage wire made of steel. Spe...
View full details
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Differential Output Gears. These diff output gears are made from hardened steel. Features:...
View full details
Traxxas Motor mount, aluminum (upper and lower)/ motor mount spacer/ hardware
This left and right 1972 Chevrolet Blazer side trim with upper and lower rear trim, left, right, and rear retainers, 23 2.6x8 BCS, and five self-ta...
View full details
TRA8860 Traxxas Spool shaft assembly, winch
This is a pack of four optional Traxxas Anodized Aluminum Wheel Hub Hexes intended for the Maxx Truck. This package also includes four 4x13mm scr...
View full details
This is a pack of four optional Traxxas Anodized Aluminum Wheel Hub Hexes intended for the Maxx Truck. This package also includes four 4x13mm scr...
View full details
Clutch bell, hardened steel (20-tooth) (32-pitch) (N. Hawk/Buggy/Street) ¶ÿ Accessory part for these models: TRX Pro .15
This is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full details
Traxxas Chassis (fits Maxx V2 with extended chassis (352mm wheelbase))
Traxxas Toe Links Slayer Features: 7075-T6 aluminum construction Fits front or rear Anodized Red Includes: Two Toe Links Eight Ball Ends One 7mm...
View full details
These are the optional tubes lightweight aluminum turnbuckles for the Traxxas T-Maxx.Features: 30% lighter than stock steel toe links 4 times stif...
View full details
This is a pack of four optional Traxxas Aluminum GTX Threaded Collars for the Traxxas X-Maxx. These hard anodized, PTFE-coated aluminum upper sprin...
View full details
This is set of four Traxxas X-Maxx GTX Shock PTFE-Coated Aluminum Spring Retainer Adjusters. These are threaded and mount on the shock body to allo...
View full details
These are the optional aluminum pushrods for use on the Traxxas 1/16 scale Slash vehicles.Features: Aluminum construction that’s in a anodized red ...
View full details
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3) Roller clutch (one-way bearing) includes 6x8x0.5 washer. Fits TR...
View full details
This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...
View full details
This is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...
View full details
This is the Traxxas set of four Anodized 17mm Splined Wheel Hubs, (4). These Splined Wheel Hubs are red colored and compatible with the Traxxas Sla...
View full details
LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders) Traxxas LED Rock Lights install directl...
View full details
This is a replacement Traxxas Center Rear Driveshaft for the Unlimited Desert Racer. Â Features: Fully assembled Made from 6061-T6 aluminum Black-...
View full details
These are the optional 17mm splined wheel hubs for the T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Aluminum construction that’s blue anodized...
View full details
These are optional for the Traxxas Slayer PRO 4x4.Features: 7075-T6 aluminum constructed tubes Red and black in color Fits front or rear Includes...
View full details
Traxxas replacement gear hub assembly for the T-Maxx 4WD Radion Control Monster Truck. This is the replacement gear hub assembly. This gear hub ass...
View full details
LED light harness/ power harness/ zip ties (9)/ mounts (2) (fits #9333 or 9335 body)Replacement part for these models:Factory Five '33 Hot Rod Coup...
View full details
This is the Replacement Front Ring Gear & Pinion Gear Set for the Unlimited Desert Racer. Includes: Â (1) Ring Gear (1) Pinion Gear
Header, exhaust (tubular aluminum, silver anodized) (TRX® 2.5, 2.5R) Silver-anodized tubular aluminum exhaust header for the TRX® 2.5, 2.5R, and 3...
View full details
ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to th...
View full details
Driveshaft assembly, front & rear, 6061-T6 aluminum (blue-anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Pr...
View full details
This is the aluminum exhaust header spring mount for the Traxxas 2.5, 2.5R and 3.3 Engines.Features: Aluminum construction that’s silver in color ...
View full details
This is the Exo-carbon wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction, exo-carbon finish ...
View full details
This is the Titan 21-turn 550 motor for the Traxxas E-Maxx. The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. Th...
View full details
Wheel hubs, splined, 17mm (blue-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm blue-anodized aluminum wheel hubs combine high-profile...
View full details
Carrier, differential (aluminum)/ (requires #7783X spider gear shaft) Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket,...
View full details
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile l...
View full details
This is a differential gear set for the Traxxas X-Maxx Monster Truck. Features: Hardened steel construction Includes:2x Output Gears4x Spider Gea...
View full details
This is a Traxxas LED headlight/tail light kit that is intended for the Traxxas TRX-4 Sport. This kit requires the Traxxas power supply TRA8028. In...
View full details
This is the Aluminum Hex Wheel Hubs for the Traxxas X-Maxx Monster Truck. Features: Replaces Stock Plastic Wheel Hexes Blue in Color Aluminum C...
View full details
Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2) Red aluminum 30° caster blocks improve the a...
View full details
This is a pack of four optional Traxxas X-Maxx Aluminum Wheel Hex Hubs in Red anodize. These aluminum hexes replace the stock plastic hexes with th...
View full details
This is a Traxxas green anodized aluminum GTX shock body, replacement for the X-Maxx. Features: Aluminum construction, anodized green in color All...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS