TRA7721 Bulkhead, front (lower)
TRAXXAS
This is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full detailsThis is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full detailsThis is the Traxxas pair of replacement XX-Long White Spring for the GTR shocks.Features: White colored Made of metal For the Traxxas GTR Shocks ...
View full detailsSpring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) Upper and lower spring retainers for Ultra Shocks with 2-hole pi...
View full detailsRing gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears Replacement part for these models: 1/16 E-Revo®...
View full detailsBattery hold-down plate (grey) / metal posts (2) / body clips (2) Gray battery hold-down with metal posts (2) and retaining clips (2). Replacemen...
View full detailsTRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
Screws, 3x6mm button-head machine (hex drive) (6) 3x6 mm button-head machine screws with hex drive heads. Set of six.
This is a replacement Traxxas X-Maxx Front Bumper. Features:Factory Replacement Bumper Includes:(1) Front Bumper
Driveshaft assembly, front or rear (2) Set of two driveshaft assemblies fit front or rear Replacement part for these models: 1/18 LaTrax® Desert...
View full detailsThis is the Traxxas pair of GTR XX-Long White Shock Springs with a 1.004 Blue Compression Rate.Features: White colored Made of metal 1.004 Blue Co...
View full detailsThis is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full detailsHousings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full detailsSteering blocks, left & right Steering blocks, left & right Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsTop drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...
View full detailsSlipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full detailsScrews, 3x12mm button-head machine (hex drive) (6) 3x12 mm button-head machine screws with hex drive heads. Set of six. Replacement par...
View full detailsPlanetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full detailsDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full detailsTraxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full detailsThese are the replacement nerf bars for the 2WD Traxxas Slash. replaces stock Traxxas #5823 not compatible with LCG versions of either the Slash 2...
View full detailsDriveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full detailsScrews, 3x12mm countersunk machine (6) (hex drive)
Silicone diaphragms (4) Silicone diaphragms (4) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis 4-Tec...
View full detailsShocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full detailsThis is a pack of four replacement Traxxas X-Maxx Suspension Pin Retainer. These retainers are used on the inside of the upper arms to secure the h...
View full detailsBody mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...
View full detailsGear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support) Differential gear set include output gears (2...
View full detailsBulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
Traxxas Complete GTR Long Shocks feature blue anodized bodies with TiN shafts. These shocks are fully assembled and ready for oil, and are compatib...
View full detailsBall bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full detailsFeatures:Steel constructionIncludes:One Differential Ring GearOne Differential Pinion GearRequires:Installation in differential assemblyTechnical S...
View full detailsTRA5262 Air filter and pre-filter inserts, foam (high-volume) (3)
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Black.Features: Steel construction with black rubber seals Used as the outer b...
View full detailsScrews, 4x12mm button-head machine (hex drive) (6) Set of six 4x12 mm button-head machine screws with hex-drive heads Replacement part for these ...
View full detailsUltra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full detailsHeat sink, Velineon 380 brushless motor, aluminum (blue-anodized)
Gear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2x14.8mm pin (1)) Replace the standard plastic gears in you...
View full detailsThis is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full detailsSpur gear, 50-tooth 50-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full detailsTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...
View full detailsTRA5314 Body mounts, front & rear/ body mount posts, front & rear/2.5x18mm screw pins (4)/ 4x10mm BCS (1)
Ball bearings, blue rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full detailsThis is a replacement 11-tooth heavy duty front differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full detailsWheel nuts, splined, 17mm, serrated (blue-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no...
View full detailsThis is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full detailsThis is a set of left and right front shock towers for the Traxxas X-Maxx Monster Truck. Features: Two-piece molded composite plastic construction...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS