TRA7640 Spur gear, 60-tooth
TRAXXAS
Spur gear, 60-tooth 60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help ...
View full details
Spur gear, 60-tooth 60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help ...
View full details
Traxxas Steering Linkage 3x20mm Turnbuckle Fits: Traxxas Slash 4x4 Traxxas Stampede 4x4
Traxxas set of cylinder head gaskets are constructed of copper. Three different thickness allow you to taylor your compression. Includes: One each ...
View full details
This is a Traxxas 61-Tooth Spur Gear factory replacement for the 1/18 scale LaTrax Desert PreRunner and LaTrax Teton. Includes:Â 1 61 tooth spur gear
This is a replacement Traxxas Maxx Transmission Input Shaft, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Features:Factory Repl...
View full details
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth spur gear (32-pitch) fits the 6814 center ...
View full details
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
TRA5228 Head protector, cooling head (1)/3x6mm CCS (5) (TRX 3.3)
Traxxas Spur Gear 32P 50T Features: Black plastic construction Includes: 32P 50T Spur Gear for the Slash 4x4 Specs: Pitch: 32P Teeth: 50T Par...
View full details
This is a replacement LaTrax Camber and Toe Link Set. This set includes four camber links and two toe links. Features:Factory Replacement Camber an...
View full details
Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) 76-tooth spur gear (48-pitch) for Torque Control slipper clutches...
View full details
This is a Traxxas 52T, 32P Spur Gear for use on the centerDifferential of the Slash 4X4. Features M0.8 pitch52 toothBlack plastic constructionCompa...
View full details
Ball bearings, black rubber sealed (5x8x2.5mm) (2) Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...
View full details
Gear, 12-T pinion (48-pitch)/ set screw
Screws, 4x25mm button-head machine (hex drive) (6)
This is a replacement Traxxas Motor Mount Hinge Post. Also included is one 5x25mm button head screw and one 4x16mm CS with split and flat washer. ...
View full details
Screws, 3x40mm button-head machine (hex drive) (6)
This is the Battery Strap for 2200 2-cell and 1400 3-cell LiPo Batteries for the Traxxas TRX-4 and TRX-6. Includes: (1) Battery Strap
This is a set of two replacement stub axle carriers from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axl...
View full details
Screws, 4x30mm button-head machine (hex drive) (6) 4x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
This is a Gearbox Brace for the Nitro Rustler and the Nitro Sport. Features Black Plastic Construction Includes One Brace Requires Traxxas Nitro Ru...
View full details
Traxxas 7337 Body Bumper Rally Mustang Ford Fiesta Fits: Traxxas 1/16 Mustang Traxxas 1/16 Ford Fiesta Traxxas 1/16 Kyle Busch Truck
This is a Traxxas Center Differential Magnet Holder, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 trucks. Package includes t...
View full details
TRA9526 Traxxas Steering link (30mm) (1)/ hollow balls (2)
TRA4262 32mm Steel Shock Shafts (Chrome Finish) (2) Replacement part for these models:Nitro 4-Tec Accessory part for these models:4-Tec 2.0 AWD Cha...
View full details
This is a replacement Traxxas Gear Cover, and is intended for use with the Traxxas 1/10 Rally. Features:Factory Replacement Gear Cover Includes:(1...
View full details
This is the Mamba ESC mounting plate from Traxxas.Features: Nylon construction that’s black in colorIncludes: ESC Mounting Plate Two 3x35mm Cap He...
View full details
Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw 26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
This is a pack of four replacement Traxxas TRX-4 Bumper D-Rings with mounting screws. Features: Factory Replacement Bumper D-Rings Gray in Color ...
View full details
Traxxas Wire Retainers/Gear Cover 3x4mm BCS (2) Features: Plastic construction, black in color Includes: Wire Retainer/Gear Cover with two 3x4mm...
View full details
Screws, 2.6x8mm flathead machine, self-tapping (hex drive) (6)
We invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS