Filters
Accessories
Brand
Parts Category
TRAXXAS PARTS
TRA9323 Traxxas Skidplate, front/ servo mounts, steering (2)
TRAXXAS
TRA9323 Traxxas Skidplate, front/ servo mounts, steering (2)
TRA8864X Traxxas Line, winch (blue)
TRAXXAS
This is blue winch line from Traxxas for the TRX4 winches. Features: Blue in color  Includes: (1) Winch line
TRA8834 Traxxas Bumper, rear (without trailer hitch receiver)
TRAXXAS
TRA8834 Traxxas Bumper, rear (without trailer hitch receiver)
TRA8538 Shock mounts, rear (left & right)
TRAXXAS
This is a replacement Traxxas Unlimited Desert Racer Rear Shock Mount Set, including the left and right side mounts. Features:Factory Replacement S...
View full details
TRA8947 Traxxas Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)
TRAXXAS
This a factory replacement pre-assembled 46mm Steering Linkage with pivot balls and Servo Horn from Traxxas intended for the Maxx vehicle. Features...
View full details
TRA8934 Traxxas Bumper mount, rear
TRAXXAS
This is the Traxxas 1/10 Maxx Rear Bumper Mount Stock Replacement OnMaxx 4S
TRA8366 Spring, shock (red)
TRAXXAS
These are the Traxxas 4-Tec 2.0 White Stripe 2.8 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 cars, including the Ford GT and Mustang...
View full details
TRA8363 Spring, shock (red)
TRAXXAS
This is a set of shock springs red with black stripe for the Traxxas Ford GT 4Tec.
TRA8314 (Y) Tail lights (2)
TRAXXAS
This is the Red Tail Lights, Exhaust Tips, Exhaust Mount and Screws for the Traxxas Ford GT and 4-Tec 2.0 AWD. Features: Plastic construction R...
View full details
TRA8277 Rod ends, angled 10-degrees (8)
TRAXXAS
This is a pack of ten replacement Traxxas 10° TRX-4 Angled Rod Ends.Â
TRA8020 Mirrors, side (left & right)/ snorkel/ mounting hardware
TRAXXAS
This is the Side Mirrors, Snorkel, and Mounting Hardware for the TRX-4 #8011 body (not included). Includes: (1) Left Mirro (1) Right Mirror Sno...
View full details
TRA8340 Suspension pin set, complete (front & rear)
TRAXXAS
This is the Traxxas 4-Tec 2.0 Complete Front and Rear Suspension Pin Set. These fit both the Ford GT and Mustang GT version.Fits4-Tec 2.0
TRA8019 Fender brace, inner, front & rear
TRAXXAS
This is a replacement Traxxas TRX-4 Land Rover Defender Front and Rear Inner Fender Brace Set.Â
TRA8335 Bumper, front (1 each, upper & lower)
TRAXXAS
Traxxas 4‑Tec 2.0 Front Upper & Lower Bumper Set
TRA7623 Upper chassis (long)/ battery hold down
TRAXXAS
This is the Traxxas Upper Chassis (Long) Battery Hold Down for the 1/18 scale LaTrax Desert PreRunner. Featrues:Â Molded in blue durable plasticRepl...
View full details
TRA3989 Shift Fork Shaft Assembly
TRAXXAS
This is the Shift Fork-Shaft Assembly with Seal for the Traxxas E-Maxx Off-Road Truck.This Shift Fork fits into the transmission and over the Drive...
View full details
TRA3996 IDLER GEAR 20T 2
TRAXXAS
These are the Replacement 20 Tooth Idler Gears for the Traxxas E-Maxx Truck.These gears are located in the gearbox.FEATURES:Plastic constructionINC...
View full details
TRA6923 Front Aluminum Tie Bar: NHRA
TRAXXAS
This is the Front Tie Bar in Aluminum for the Traxxas NHRA Funny Car, TRAD69**.FEATURES:Titanium anodized aluminum constructionINCLUDES:Front Tie B...
View full details
TRA4968X LINKAGE, SHIFT
TRAXXAS
This is the Shift Linkage Set for the Traxxas 3.3 T-Maxx.FEATURES:Installs on shift servo and controls shifting of the transmissionINCLUDES:Servo h...
View full details
TRA6888X Drive hub, front, hardened steel (1)/ screw pin (1)
TRAXXAS
This is an optional Traxxas Hardened Steel Front Drive Hub, and is intended for use with the Traxxas Slash 4x4 and other Traxxas vehicles. Includes...
View full details
TRA6877 Cover, gear/ motor wire hold-down clip
TRAXXAS
Cover, gear/ motor wire hold-down clip Replacement gear cover with motor wire hold-down clip Replacement part for these models: Ford® F-150® Rap...
View full details
TRA4685 Friction pegs, slipper (12)
TRAXXAS
These are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full details
TRA5321 Suspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2)
TRAXXAS
This is the steel suspension pin set for the Traxxas Revo. They are also commonly known as hinge pins.Features: Steel construction with a polished ...
View full details
TRA3640 Suspension screw pin set, steel (hex drive)
TRAXXAS
These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads.Feature...
View full details
TRA7742 Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)
TRAXXAS
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
TRA5456 Half shafts, center front (Revo 3.3)
TRAXXAS
Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only) Replacement front and rear center half shafts (plastic parts...
View full details
TRA6877A Cover, gear (clear)
TRAXXAS
This is the optional clear gear cover for use on the Traxxas Slash 4x4.Features: Plastic construction that is clear in colorIncludes: One Clear Gea...
View full details
TRA7021 Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4)
TRAXXAS
Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits front or ...
View full details
TRA3978 Carrier, differential (heavy duty)
TRAXXAS
Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 6x10x0.5 TW Heavy-duty differential carrier with x-ring ga...
View full details