Filters
Accessories
Brand
Parts Category
TRAXXAS PARTS
TRA8134 Traxxas Grille, Chevrolet Blazer (1979)/ grille retainers (4)/ h
TRAXXAS
This is a Traxxas TRX-4 1979 Chevrolet Blazer Grille, intended as a replacement for the part supplied with the TRX-4 Chevrolet Blazer Kit and as ...
View full details
TRA6532 Traxxas Phone mount, transmitter (fits TQi and Aton transmitters)
TRAXXAS
Phone mount, transmitter (fits TQi & Aton® transmitter) The transmitter phone mount attaches to the handle of top of TQi transmitters to provid...
View full details
TRA5280 Control box (complete) (EZ-Start 2)
TRAXXAS
Control box (complete) (EZ-Start® 2) Replacement starter control box for the EZ-Start® 2 starter. Replacement part for these models: Jato® Nitro...
View full details
TRA8977 Traxxas Ring gear, differential/ pinion gear, differential (rear
TRAXXAS
This is the replacement Rear Differential Ring Gear and Differential Pinion Gear for the Traxxas Maxx. Includes: (1) Differential Ring Gear (1)...
View full details
TRA8074 Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware
TRAXXAS
Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware Replica spare tire for the TRX-4® 1979 Ford® Bronco body. Includes mount, ...
View full details
TRA5379X Ring gear, differential/ pinion gear, differential
TRAXXAS
Traxxas Differential Ring Gear/Pinion Gear Features: Direct replacement part Includes: One differential ring gear One pinion gear Fits: Traxx...
View full details
TRA5329 Bulkhead, rear (L&R halves)/ diff retainer, rear/ 4x14mm BCS (2)
TRAXXAS
Bulkhead, rear (L&R halves)/ diff retainer, rear/ 4x14mm BCS (2) Rear left and right bulkhead halves with differential retainer and 4x14 screw...
View full details
TRA3678R Traxxas Wheelie Bar, Assembled (Red)
TRAXXAS
Wheelie bar, assembled (red) (fits Slash, Bandit®, Rustler®, Stampede® series)The patented Traxxas adjustable wheelie bar features four-position ad...
View full details
TRA9227 Traxxas Fender flares, front & rear (2 each)/ flare mounts (4)
TRAXXAS
Fender flares, front & rear (2 each)/ flare mounts (4)/ 2x8 CS (24) (fits #9211 body)
TRA5279 Motor/ pinion gear/ motor bushing (EZ-Start 2)
TRAXXAS
This is the motor and pinion gear for the Traxxas EZ Start 2 (R) System.Features: Pre-installed 10 tooth pinion gearIncludes: Motor and Pinion Gear...
View full details
TRA7768 Stub axle, aluminum (blue-anodized) (1)
TRAXXAS
This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X) ...
View full details
TRA8083 Traxxas Installation kit, Pro Scale Advanced Lighting Control
TRAXXAS
This is an Installation Kit for use with the Pro Scale® Advanced Lighting Control System in the TRX-4® Sport, TRX-4 1979 Chevrolet Blazer and TR...
View full details
TRA9587 Traxxas Drive cup, front or rear (hardened steel) (for different
TRAXXAS
TRA9587 Traxxas Drive cup, front or rear (hardened steel) (for different
TRA3678X Wheelie bar, assembled (blue) (fits Slash, Stampede, Rustler,Bandit series)
TRAXXAS
Wheelie bar, assembled (blue) (fits Stampede®, Rustler®, Bandit series) The patented Traxxas adjustable wheelie bar features four-position adjustm...
View full details
TRA2388X Planetary gear differential with steel ring gear (complete)
TRAXXAS
Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full details
TRA7660 Shocks, oil-filled (2)
TRAXXAS
This is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock o...
View full details
TRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
TRAXXAS
TRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
TRA5040 Traxxas Oil, Differential (20M Weight)
TRAXXAS
Oil, differential (20M wt) (standard) Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in c...
View full details
TRA7768G Traxxas Stub Axle, Aluminum (Green-Anodized) (1) (Use Only With #7750X Driveshaft)
TRAXXAS
Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this br...
View full details
TRA7721 Bulkhead, front (lower)
TRAXXAS
This is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full details
TRA6779 Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear)
TRAXXAS
This is the replacement Traxxas Rear Ring and Pinion Gear for the Stampede 4x4. This set features a 12 tooth pinion and 47 tooth ring gear, and is ...
View full details
TRA6882X Gear set, differential (output gears (2)/ spider gears (2)/ spidergear shaft, carrier support)
TRAXXAS
This is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full details
TRA7768R Traxxas Stub Axle, Aluminum (Red-Anodized) (1) (Use Only With #7750X Driveshaft)
TRAXXAS
This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X...
View full details
TRA7022 Chassis
TRAXXAS
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details
TRA8279 Ring gear, differential/ pinion gear, differential
TRAXXAS
This is a replacement differential ring and pinion gear set for the Traxxas TRX-4. Package contains one ring gear and one pinion gear. Features:F...
View full details
TRA7768A Traxxas Stub Axle, Aluminum (Black-Anodized) (1)
TRAXXAS
Stub axle, aluminum (black-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this br...
View full details
TRA9527 Traxxas Tie bars, front, 6061-T6 aluminum (blue-anodized) (fits Sledge)
TRAXXAS
TRA9527 Traxxas Tie bars, front, 6061-T6 aluminum (blue-anodized) (fits Sledge)
TRA4550 Exhaust header w/ gasket & screws
TRAXXAS
FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm S...
View full details
TRA2338X Tit Turnbuckle 94mm
TRAXXAS
Turnbuckles, titanium 94mm (front tie rods) (2)/ billet aluminum wrench
TRA8295 Output drive, transmission or differential
TRAXXAS
Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) ...
View full details
TRA8849 Traxxas Output drive, transmission or differential (pin retainer
TRAXXAS
TRA8849 Traxxas Output drive, transmission or differential (pin retainer
TRA5541 TUNED PIPE COMPOSITE
TRAXXAS
Traxxas assembled tuned pipe is made of molded composite construction with rubber header gasket. Black in color Includes: One Molded Composite Tune...
View full details
TRA7668X Wheel nut washer, machined aluminum, orange/3x12mm CS (4)
TRAXXAS
Traxxas 7668X Wheel Nut Washer Aluminum Orange 3x12mm CS (4) LaTrax Teton / SST These are the Wheel Nut Washers for the LaTrax Teton Monster Truck ...
View full details