TRAXXAS CARS AND TRUCKS AND PARTS IN STOCK 2025

Servo, sub-micro, waterproof The 2065T waterproof sub-micro servo features a metal main gear for precise control and powerful steering authority. ...

Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive Traxxas precision-ground, hardened-steel hex tips fit just right,...

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...

Traxxas Roll Bar/ Roll Bar Mounts, Left & Right/ 2.6X12 BCS (Self-Tapping) (4)/ 2.5x15 CS (2) (Fits TRA9212 Body)

Traxxas Cover Gear (Red-Anodized 6061-T6 Aluminum)

Traxxas Steering Blocks, Brass (7 Grams) (Left & Right)/ 2.5x12mm BCS (With Threadlock) (2)/ 2x6mm SS (With Threadlock) (4)

TRA9523T Traxxas Center brace (T-Bar), 6061-T6 aluminum (orange-anodized)

TRA9497R Traxxas LED lights, tail lights (red)/ tailgate trim (chrome)

TRA9497A Traxxas Tail lights (red)/ power harness/ trim (satin blk chrme)

TRA9496X Traxxas LED light set, front, complete (blue)

TRA9496R Traxxas LED light set, front, complete (red)

Traxxas Gear set, metal (for 2250, 2255 servos)

This is the Front and Rear Ball Bearing set for the Traxxas 2.5 nitro engine.FEATURES:Steel ConstructionINCLUDES:One Front BearingOne Rear BearingS...

This is a replacement Traxxas Aluminum Rear Axle Carrier Set, and is intended for use with the Traxxas X0-1.

This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and ...

This is a replacement Traxxas Aluminum Front Shock Tower, and is intended for use with the Traxxas X0-1.

Traxxas Charger, USB-C, 20W (5 - 7 cell, 6.0 - 8.4 volt, NiMH) (with iD)

The 2-amp NiMH fast charger with Molex plug uses a 12-volt DC power outlet to charge NiMH batteries for EZ-Start® systems on nitro vehicles. The ch...

Charger, DC, 2 amp (5 - 6 cell, 6.0 - 7.2 volt, NiMH) ¶ÿ This product is not shippable to the USA

The Traxxas Aluminum Steering Block Set is CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, R...

This is a pair of Traxxas Steel Rear Constant Velocity Driveshafts, much stronger and smoother than stock, makes a great upgrade for the Ford GT, M...

This is a pair of steering blocks for the Traxxas XO-1.Features: Aluminum construction that is anodized and blue in colorIncludes: One each Left an...

Servo, sub-micro

Traxxas Tires & Wheels Assembled Glued (2.8") (RXT Gray Wheels Talon EXT Tires Foam Inserts) (4WD Electric Front/Rear 2WD Electric Front Only) ...

Features: Metal Construction, installs in gearbox behind the primary clutch assembly Black in color   Includes: (1) Metal Primary Shaft (1) O...

Traxxas package of thirty aluminum hollow balls for the Revo.Constructed of gun metal gray colored aluminum.Two tall offset aluminum hollow balls a...

FEATURES: One way hub and E-Ring INCLUDES: One way Hub E-ring

Traxxas Whip light, LED (assembled) (1)/ 3x12mm BCS (2) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply), Blue

This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...

LiPo Cell Voltage Checker/Balancer (2968)The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the required Balan...

Receiver, LaTrax micro, 2.4GHz (3-channel)

TRX-4M® Defender Pro Scale™ Light Set Add scale lighting to your 1/18 scale TRX-4M Defender for an extra layer of fun and good looks. The Pro Sca...

This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...

Traxxas Servo Mount, 6061-T6 Aluminum (Blue-Anodized)

Traxxas Body conversion kit, 1/18 scale TRX-4MT Bigfoot No. 1 (includes front grille, engine detail & decals) (fits #9812 body)

Traxxas Carriers, Stub Axle (Rear) (Left & Right)/ 20x32x7mm Bearings (2)/ 15x24x5mm Bearings (2)

Traxxas Front light harness, Ford Bronco (2021) (requires #6592 lighting power module and #6593 distribution block)

Traxxas Servo Mount, 6061-T6 Aluminum (Green-Anodized)

TRA8860 Traxxas Spool shaft assembly, winch

This is a pack of two replacement Traxxas E-Revo VXL 2.0 Differential Output Gears. These diff output gears are made from hardened steel. Features:...

Clutch bell, hardened steel (20-tooth) (32-pitch) (N. Hawk/Buggy/Street) ¶ÿ Accessory part for these models: TRX Pro .15

These are the optional aluminum pushrods for use on the Traxxas 1/16 scale Slash vehicles.Features: Aluminum construction that’s in a anodized red ...

This is a pack of four optional Traxxas Aluminum GTX Threaded Collars for the Traxxas X-Maxx. These hard anodized, PTFE-coated aluminum upper sprin...

Traxxas Toe Links Slayer Features: 7075-T6 aluminum construction Fits front or rear Anodized Red Includes: Two Toe Links Eight Ball Ends One 7mm...

These are the optional tubes lightweight aluminum turnbuckles for the Traxxas T-Maxx.Features: 30% lighter than stock steel toe links 4 times stif...

This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...