TRAXXAS CARS AND TRUCKS AND PARTS IN STOCK 2025

TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)

This is the Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler.This gear is located in the transmission. Features White nylon construc...

These are the 3mm x 10mm shoulder screws for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s black in colorIncludes: Six 3...

Traxxas Shoulder screws, 3x10mm (6) (with threadlock)

TRA3940 Screws, 4x4mm button-head machine, aluminum (blue) (hex drive) (6)

Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...

Traxxas tie-rods and upper camber rods are constructed of steel. Includes: Four Turnbuckles Two Draglinks. These turnbuckles are used on the steeri...

Anchoring pins with locknuts (4)/ plastic thumbscrews for upper deck (4)

This is a replacement Traxxas Front & Rear Steel Bulkhead Tie Bar Set, and is intended for use with the Traxxas 1/16 Grave Digger Monster Jam R...

Manufacturer Description This is the Replacement Carrier Drive Dog for Traxxas E-Maxx Truck.This part is located in the gearbox in between the two ...

TRA4919 Servo mounts, throttle/ brake (1) (black)

This is a replacement Traxxas Receiver Cover, and is intended for use with the Traxxas Nitro Sport 1/10 Scale Nitro Truck. 

TRA3959 Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)

Features: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32

Spur gear, 50-tooth (1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...

These are the body clips for the Traxxas E-Maxx and T-Maxx trucks.Features: Steel construction Natural polished color Includes: Twelve Body Clips...

Attachment screws, shock (3x12mm shoulder screws) (6) Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. Rep...

Bumper (front) Replacement front bumper Replacement part for these models: Bandit® VXL Bandit® Nitro Rustler® Nitro Slash Rustler® VXL Rustler® ...

Steering blocks, left & right (2) (requires 5x11x4mm bearings) Replacement left & right steering blocks. Requires 5x11x4 mm bearings. Re...

Traxxas Front Axles (2) Features: Steel construction Natural color Includes: Two front axles Specs: Length: 32mm (1.26") Diameter: 5mm Part C...

Traxxas White Lithium Grease

Body mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...

Trust bearing lube

Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) 58-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...

Input shaft (slipper shaft) / spring pin Replacement input shaft (slipper clutch shaft) for Magnum 272 transmissions. Does not fit Magnum 272R tra...

This is a package of 6 threadlocked grubs (4mm) from Traxxas.Features: Threadlocking compound pre-applied Hardened steel construction Designed for...

Idler gear, steel (30-tooth) Replacement 30-tooth steel idler gear for the Magnum 272 transmission. Does not fit Magnum 272R transmission. Repla...

This is a front and rear differential housing for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Fastens to fro...

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...

This is a pack of four replacement Traxxas TRX-4 Bumper D-Rings with mounting screws. Features: Factory Replacement Bumper D-Rings Red in Color I...

Includes: (2) Battery Hold Down Retainers Replacement Part For: XO-1® (Model# 64077-3)

This is a pack of 12 heavy duty body clips for Traxxas vehicles. Features: Black Color Curved End to Ease Removal Includes:(12) Body Clips Body ...

Traxxas Spring, Shock (GTM) (0.155 Rate) (1 Pair)

Spur gear, 55-tooth Replacement part for these models:4-Tec 2.0 VXL AWD Chassis

Traxxas Spur gear, 47-tooth (0.8 metric pitch, compatible with 32-pitch)

This is a Gearbox Brace for the Nitro Rustler and the Nitro Sport. Features Black Plastic Construction Includes One Brace Requires Traxxas Nitro Ru...

Traxxas Spring, Shock (0.095 Rate) (1 Pair)

Traxxas Transmitter Spring Contacts (7)

Traxxas Top Drive Gear, Steel (21-Tooth)

Spur gear, 70-tooth 70-tooth spur gear (48-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear rat...

These are the Traxxas 4-Tec 2.0 Red Front and Rear Brake Calipers. These work on all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Rep...

Includes: (2) 29mm Front Steel Shock Shafts, Chrome Finish Accessory Part For: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Ford GT...

This is a pack of four replacement Traxxas TRX-4 Bumper D-Rings with mounting screws. Features: Factory Replacement Bumper D-Rings Gray in Color ...

This is the Traxxas 4-Tec 2.0 Motor Plate. This fits all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Replacement On4-Tec 2.0 VXL Cha...

Traxxas 7337 Body Bumper Rally Mustang Ford Fiesta Fits: Traxxas 1/16 Mustang Traxxas 1/16 Ford Fiesta Traxxas 1/16 Kyle Busch Truck

These are the two Wheels for the #6978 Wheelie Barused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, bla...

This is the Servo Saver for the Traxxas Funny Car. Features: Plastic construction   Includes: (1) Servo Saver (1) Screw

This is the Shock Mount Lower and Wire RetainerFor the Traxxas Funny CarsFEATURES:Black plasticINCLUDES:One shock mountOne wire retainerCOMMENTS:Th...