TRA7462 Shocks, GTR xx-long blue-anodized
TRAXXAS
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full detailsShocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full detailsThese are the replacement nerf bars for the 2WD Traxxas Slash. replaces stock Traxxas #5823 not compatible with LCG versions of either the Slash 2...
View full detailsGear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support) Differential gear set include output gears (2...
View full detailsTRA5262 Air filter and pre-filter inserts, foam (high-volume) (3)
Screws, 3x12mm countersunk machine (6) (hex drive)
Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale long GTR shocks represent the...
View full detailsThis is a pack of four replacement Traxxas X-Maxx Suspension Pin Retainer. These retainers are used on the inside of the upper arms to secure the h...
View full detailsBody mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...
View full detailsFeatures:Steel constructionIncludes:One Differential Ring GearOne Differential Pinion GearRequires:Installation in differential assemblyTechnical S...
View full detailsThis is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Black.Features: Steel construction with black rubber seals Used as the outer b...
View full detailsTraxxas EZ-Peak 4S "Completer Pack" Multi-Chemistry Battery Charger w/One Power Cell 4S Battery (6700mAh)The 2998 4S Completer Pack delivers maxxim...
View full detailsBulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
This is a replacement 11-tooth heavy duty front differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full detailsThis is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full detailsBall bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full detailsTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...
View full detailsScrews, 4x12mm button-head machine (hex drive) (6) Set of six 4x12 mm button-head machine screws with hex-drive heads Replacement part for these ...
View full detailsUltra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full detailsHeat sink, Velineon® 380 brushless motor, aluminum (blue-anodized) Add the blue-anodized aluminum heat sink to your Velineon 380 brushless motor t...
View full detailsThe Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles. ...
View full detailsVelineon 3500 Brushless Motor The Velineon® 3500 kV brushless motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a...
View full detailsGear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.
Gear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2x14.8mm pin (1)) Replace the standard plastic gears in you...
View full detailsTraxxas Premium Shock Oil (50 wt) Traxxas premium 50 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicon...
View full detailsThis is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full detailsThis is a set of left and right front shock towers for the Traxxas X-Maxx Monster Truck. Features: Two-piece molded composite plastic construction...
View full detailsSpur gear, 50-tooth 50-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full detailsThis is the Traxxas Splined 17mm Wheel Wrench.Features: Black colored Made of nylon Compatible with the 17mm splined nuts used on many Traxxas veh...
View full detailsTRA5314 Body mounts, front & rear/ body mount posts, front & rear/2.5x18mm screw pins (4)/ 4x10mm BCS (1)
This is a replacement 11-tooth heavy duty rear differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full detailsThis is an optional rear upper and lower bulkhead for the Traxxas X-Maxx. Designed for use with the 8S Torque-biasing Center Drive. Package contain...
View full detailsBall bearings, blue rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full detailsWheel nuts, splined, 17mm, serrated (blue-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no...
View full detailsSuspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...
View full detailsThis is the Hold Down Battery Set for the 2WD & 4X4 Traxxas Slash. Features: Black nylon construction Includes: (1) Battery Hold Down ...
View full detailsTraxxas Slipper Pressure Plate & Hub Alloy Revo Features: Aluminum construction Includes: One slipper pressure plate One slipper hub Part C...
View full detailsThis is a 6 pack of Traxxas 2.5X8mm cap head screws.Features: Steel construction Black in color Cap head design Includes: Six 2.5X8mm cap head sc...
View full detailsRebuild kit, Velineon® 3500 (includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing) Rebuild kit f...
View full detailsCarriers, stub axle (rear) (2) Standard rear stub axle carriers (2) Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsSpur gear, 54-tooth, steel (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. ...
View full detailsWheel hex clips (6) Set of six wheel hex clips Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
This is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock o...
View full detailsThis is a bottle of Traxxas Differential Oil. This differential oil can be used for a variety of vehicle types. The thicker the oil, the less your ...
View full detailsScrew pin set (Rustler®/ Bandit/ Stampede®) Suspension screw pin set Replacement part for these models: Bandit® BIGFOOT® No. 1 Officially Licens...
View full detailsWashers, 3x6mm metal (12) Pack of twelve 3x6 mm metal washers Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash...
View full detailsScrews, 3x10mm countersunk machine (6) (hex drive)
Screws, 4x12mm countersunk machine (hex drive) (6) 4x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS