TRA2530A Bulkhead (front) (grey)
TRAXXAS
Bulkhead (front) (grey) Gray front bulkhead Replacement part for these models: Bandit® VXL Bandit® Nitro Rustler® Nitro Slash Rustler® VXL Rustl...
View full detailsBulkhead (front) (grey) Gray front bulkhead Replacement part for these models: Bandit® VXL Bandit® Nitro Rustler® Nitro Slash Rustler® VXL Rustl...
View full detailsWire harness, series battery connection (compatible with Traxxas High Current Connector, NiMH only)
TRA3752 Stub axle carriers (2) (requires 5x11x4mm bearings) ***** if not in stock order RPM80385 or RPM80382 Stub axle carriers (2) (requires 5x...
View full detailsRugged Innovation The X-Maxx LED Light Kit is the only light kit worthy of the X-Maxx name. Built to handle brutal real-world punishment, this ligh...
View full detailsServo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link The Maxx®-Duty metal-gear steering servo fe...
View full detailsThis is the Traxxas pair of replacement Long White Spring for the GTR shocks.Features: White colored Made of metal For the Traxxas GTR Shocks Inc...
View full detailsDriveshaft, center, 6061-T6 aluminum (blue-anodized) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong an...
View full detailsScrews, 3x10mm button-head machine (hex drive) (6) 3x10 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsJust like the heavy-duty suspension arms, X-Maxx roof skid plates use the toughest composite material. Whether you're sending it at the skate park,...
View full detailsGear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 18-tooth pinion gear (1.0 metric pitch) fits...
View full detailsThis is an optional Traxxas Hardened Steel Front Drive Hub, and is intended for use with the Traxxas Slash 4x4 and other Traxxas vehicles. Includes...
View full detailsUltra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a...
View full detailsWheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x10mm) (2) 12 mm tall-offset wheel hex hubs with 2x10 mm axle pins (2) Replacement part ...
View full detailsRebuild kit, oil-filled shocks (o-ring, bladder, piston, shaft guide, E-clips, shock cap, shock rod end) renews 2 shocks Rebuild kit for LaTrax Te...
View full detailsTraxxas Sway Bar Kit Slash 4X4 Features: For front and rear application to reduce chassis roll in turns and add stability Includes: Two thick an...
View full detailsStub axles, rear (2) Set of two replacement rear stub axles Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Lic...
View full detailsRod ends, long (6)/ hollow ball connectors (6) Set of six long rod ends with hollow ball connectors Replacement part for these models: Bandit® B...
View full detailsThis is an optional Traxxas WideMaxx Steel Constant-Velocity Driveshaft Set. This is a complete upgrade, with steel constant-velocity driveshafts, ...
View full detailsThis is a pack of 10,000wt, 30,000wt and 50,000wt differential oils from Traxxas. This oil is used to fill the front or rear differential on the Tr...
View full detailsXL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)
Screws, 3x20mm button-head machine (hex drive) (6) 3x20 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsTraxxas Premium Shock Oil (30 wt) Traxxas premium 30 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicon...
View full detailsTires & wheels, assembled, glued (X-Maxx® black wheels, paddle tires, foam inserts) (left & right) (2) X-Maxx® paddle tires offer unbeatab...
View full detailsThis is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full detailsThis is the Traxxas pair of replacement XX-Long White Spring for the GTR shocks.Features: White colored Made of metal For the Traxxas GTR Shocks ...
View full detailsSpring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) Upper and lower spring retainers for Ultra Shocks with 2-hole pi...
View full detailsRing gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears Replacement part for these models: 1/16 E-Revo®...
View full detailsTraxxas Top Fuel Power Plus 33% Nitro Fuel (One Quart)
High-Torque Waterproof Servo• 80 oz-in torque• Transit time 0.23 sec/60° Replacement part for these models: Bandit® BIGFOOT® No. 1...
View full detailsTRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
Screws, 3x6mm button-head machine (hex drive) (6) 3x6 mm button-head machine screws with hex drive heads. Set of six.
This is a replacement Traxxas X-Maxx Front Bumper. Features:Factory Replacement Bumper Includes:(1) Front Bumper
Driveshaft assembly, front or rear (2) Set of two driveshaft assemblies fit front or rear Replacement part for these models: 1/18 LaTrax® Desert...
View full detailsThis is the Traxxas pair of GTR XX-Long White Shock Springs with a 1.004 Blue Compression Rate.Features: White colored Made of metal 1.004 Blue Co...
View full detailsThis is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full detailsHousings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full detailsSteering blocks, left & right Steering blocks, left & right Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsTop drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...
View full detailsSlipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full detailsScrews, 3x12mm button-head machine (hex drive) (6) 3x12 mm button-head machine screws with hex drive heads. Set of six. Replacement par...
View full detailsPlanetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full detailsDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full detailsTraxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full detailsThese are the replacement nerf bars for the 2WD Traxxas Slash. replaces stock Traxxas #5823 not compatible with LCG versions of either the Slash 2...
View full detailsDriveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full detailsScrews, 3x12mm countersunk machine (6) (hex drive)
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS