Suspension pins, 44mm (2) w/ E-clips 44 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty st...
View full details
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) T...
View full details
Ball bearings, blue rubber sealed (8x16x5mm) (2) Pair of 8x16x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders) Traxxas LED Rock Lights install directl...
View full details
Body clip (mounting clip), angled, 90-degrees (10) 90-degree mounting clips are perfect for battery latches, making battery access quick and easy...
View full details
Ball bearings, blue rubber sealed (12x18x4mm) (2) Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime o...
View full details
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Replace your non-adjustable re...
View full details
Nuts, 4mm flanged nylon locking (steel, serrated) (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
Input shaft (slipper shaft) / spring pin Replacement input shaft (slipper clutch shaft) for Magnum 272 transmissions. Does not fit Magnum 272R tra...
View full details
Traxxas 30 Degree Caster Blocks Left/Right Features: Black Plastic Construction Includes: Two Blocks Caster blocks (L&R) (30-degree) Rep...
View full details
This is the set of two Traxxas assembled and glued SCT split-spoke, satin chrome, beadlock style wheels and paddle tires with foam inserts. This se...
View full details
Traxxas Differential Ring Gear/Pinion Gear Features: Direct replacement part Includes: One differential ring gear One pinion gear Fits: Traxx...
View full details
This is a bottle of Traxxas Differential Oil. This differential oil can be used for a variety of vehicle types. The thicker the oil, the less your ...
View full details
Clutch shoes (2)/ spring (T-Maxx/Revo/Jato/Nitro 4-Tec) Replacement part for these models: Jato® Revo® Slayer® Pro 4X4 T-Maxx® TRX® 2.5R TRX® 3.3...
View full details
Decal sheet, racing sponsors Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different fu...
View full details
Nuts, 3mm nylon locking (12) Set of twelve 3 mm flanged chrome nylon locking nuts Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Rev...
View full details
Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2) These 12 mm aluminum hex wheel hubs are both lightweight and tough as nail...
View full details
E-clips/ C-rings Set of assorted E-Clips and C-rings Replacement part for these models: 4-Tec® 2.0 Brushless AWD Chassis Drag Slash 1967 Chevrol...
View full details
Tires & wheels, assembled, glued (X-Maxx® black wheels, Maxx® AT tires, foam inserts) (left & right) (2) Add some high-impact style to you...
View full details
Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front...
View full details
The accessory Revo wheelie bar assembly features a unique quick release design that is compatible with Revo trucks, nitro and electric. The wheelie...
View full details
This is a Traxxas Rear bumper mount and support for the X-Maxx. Increase the overall rigidity and structural integrity of your vehicle with this re...
View full details
Slipper clutch, complete (for Slash 4x4) This slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The...
View full details
This is an optional Traxxas "Long" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of...
View full details
Servo saver w/ adapters The spring-loaded servo saver protects your steering servo by absorbing shocks that might otherwise cause internal gear da...
View full details
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears) Heavy-duty metal 35-tooth ring gear fits...
View full details
Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set) Hardened ste...
View full details
Screws, 3x8mm button-head machine (hex drive) (6) 3x8 mm button-head machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
This is a replacement Traxxas front bulkhead, and is intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Features:Factory Repla...
View full details
Suspension arms, front or rear (2) Left or right suspension arms fit front or rear Replacement part for these models: 1/18 LaTrax® Desert Prerun...
View full details
Bulkhead, front & rear / differential housing, front & rear Front and rear bulkheads with front and rear differential housing covers Repl...
View full details
This is the Suspension Pin Set for the Traxxas Slash 4X4. The hinge pins hold the suspension arms to the bulkheads.Features: Durable steel constru...
View full details
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW Replacement differential carrier includes X-ring gaskets (2), ring gear g...
View full details
Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch) 86-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
Battery, Power Cell, 3000mAh (NiMH, 7-C flat, 8.4V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and “punch” a...
View full details
This is a set of left and right caster blocks for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Supports the d...
View full details
This is the short course racing truck clear body for the Traxxas 4x4 Slash and Slayer. Features: Trimmed and ready to paint Clear protective coati...
View full details
Oil, differential (50K wt) (1.7 oz (50cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of t...
View full details
Traxxas Front Axles (2) Features: Steel construction Natural color Includes: Two front axles Specs: Length: 32mm (1.26") Diameter: 5mm Part C...
View full details
Tie bar, fiberglass The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installa...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Steering bellcrank set features bellcrank, servo ...
View full details
Slash® 2WD Low-CG (Low Center of Gravity) Conversion Kit #5830 Everything to convert your Slash 2WD The Low-CG Conversion Kit lowers your Slash’...
View full details
Shock rebuild kit (for 2 shocks) The shock rebuild kit includes the parts needed to rebuild two Ultra Shocks or Big Bore shocks used on Slash®, Ru...
View full details
This is a front and rear differential housing for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Fastens to fro...
View full details
Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4) Long half shaft set includes two external and two int...
View full details
More information about Traxxas Mount Temperature Sensor TRA6535 This is the temperature sensor mount for the Traxxas TQi telemetry system.Features:...
View full details