ALL TRAXXAS

These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...

Air filter inserts, foam (3) (pre-oiled) (TRX® 2.5) Pack of three replacement pre-oiled air filter inserts for TRX® 2.5, 2.5R, and 3.3 engines. R...

Spur gear, 38-tooth (1.0 Module) 38-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model...

Idler gear, steel (30-tooth) Replacement 30-tooth steel idler gear for the Magnum 272 transmission. Does not fit Magnum 272R transmission. Repla...

2021 Ford Bronco TRX4 Scale and Trail Crawler AN OFF-ROAD LEGEND RETURNS The legend is back. After 25 years, the Bronco has returned as Ford's top-...

Wheel hex clips (6) Set of six wheel hex clips Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®

Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...

Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1) Front and rear body mounts and body pos...

Rebuild kit, Velineon® 3500 (includes plastic endbell,  5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing) Rebuild kit f...

Washers, 3x6mm metal (12) Pack of twelve 3x6 mm metal washers Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash...

Body mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...

This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...

Screw pin set (Rustler®/ Bandit/ Stampede®) Suspension screw pin set Replacement part for these models: Bandit® BIGFOOT® No. 1 Officially Licens...

Screws, 3x15mm countersunk machine (6) (hex drive)

Screws, 3x12mm countersunk machine (6) (hex drive) 3x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...

Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits...

Spur gear, 54-tooth, steel (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. ...

Ball bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...

Features:Steel constructionIncludes:One Differential Ring GearOne Differential Pinion GearRequires:Installation in differential assemblyTechnical S...

This is a Traxxas M0.8P, 52T spur gear.Features: M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears Includes: One M0...

TRA5459 Revo T-Maxx Rubber Driveshaft Boots(2) Boots, driveshaft (rubber) (2) Replacement part for these models: E-Revo Brushless E-Revo Revo T-Maxx

Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3) Blue pipe coupler for use with pipes 5152 and 4452R exh...

TRX-4M Light Bar Kit Blaze a path to your next adventure with the TRX-4M™ LED Light Bar kit. The kit adds ultra-bright forward lighting with additi...

Traxxas BEC, complete (includes receiver box cover and seals)

TRX-4® Deep-Terrain Traxx® Traction Redefined All-terrain Traxx with Deep-Terrain Treads provides the most significant traction upgrade you can ma...

These are the Traxxas Ball Bearings for the LaTrax Rally Car.Features: Silver/grey colored Made of Steel for a long life time Replaces all bushing...

Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...

Screws, 3x8mm flat-head machine (hex drive) (6) Set of six 3x8 mm flat-head machine screws with hex-drive heads Replacement part for these models...

Adapter, standard servo (adapts standard servo to fit in X-Maxx®)Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, or XRT®...

Servo, digital high-speed, metal gear (ball bearing), waterproof The digital 2075R High-Speed Metal Gear Servo features a waterproof case for worr...

Features:Hardened plastic constructionBlack in colorIncludes:One left caster blockOne right caster blockRequires:Installation on SlashTechnical Spe...

Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3) Roller clutch (one-way bearing) includes 6x8x0.5 washer. Fits TR...

Ball Bearing, black rubber sealed (17x26x5) (2) Pair of 17x26x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal be...

Bottle, fuel filler (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and...

Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxxas...