Rebuild kit, Velineon® 3500 (includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing) Rebuild kit f...
View full details
Screws, 3x12mm countersunk machine (6) (hex drive) 3x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Save 17%
FOR EXTRA BATTERY ORDER TRA2821 What’s Included MODEL 97054-1: TRX-4M Scale and Trail™ Crawler with Land Rover Defender Body: 1/18 Scale 4X4 Tr...
View full details
Save 13%
2021 Ford Bronco TRX4 Scale and Trail Crawler AN OFF-ROAD LEGEND RETURNS The legend is back. After 25 years, the Bronco has returned as Ford's to...
View full details
Spur gear, 54-tooth, steel (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. ...
View full details
These are the Traxxas Ball Bearings for the LaTrax Rally Car.Features: Silver/grey colored Made of Steel for a long life time Replaces all bushing...
View full details
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...
View full details
Control box (complete) (EZ-Start® 2) Replacement starter control box for the EZ-Start® 2 starter. Replacement part for these models: Jato® Nitro...
View full details
Air filter inserts, foam (3) (pre-oiled) (TRX® 2.5) Pack of three replacement pre-oiled air filter inserts for TRX® 2.5, 2.5R, and 3.3 engines. R...
View full details
Spur gear, 38-tooth (1.0 Module) 38-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model...
View full details
Idler gear, steel (30-tooth) Replacement 30-tooth steel idler gear for the Magnum 272 transmission. Does not fit Magnum 272R transmission. Repla...
View full details
Screws, 3x15mm countersunk machine (6) (hex drive)
The BL-2s brushless power system delivers more speed, faster acceleration, and virtually maintenance-free operation at an affordable price. Drivers...
View full details
Screw pin set (Rustler®/ Bandit/ Stampede®) Suspension screw pin set Replacement part for these models: Bandit® BIGFOOT® No. 1 Officially Licens...
View full details
Save 17%
FOR EXTRA BATTERY ORDER TRA2821 What’s Included MODEL 97054-1: TRX-4M Scale and Trail™ Crawler with Land Rover Defender Body: 1/18 Scale 4X...
View full details
Traxxas BEC, complete (includes receiver box cover and seals)
Ball bearings, blue rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full details
This is a Traxxas M0.8P, 52T spur gear.Features: M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears Includes: One M0...
View full details
Washers, 3x6mm metal (12) Pack of twelve 3x6 mm metal washers Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash...
View full details
1400mah 11.1v 3-Cell 25C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top spee...
View full details
Adapter, standard servo (adapts standard servo to fit in X-Maxx®)Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, or XRT®...
View full details
Servo, digital high-speed, metal gear (ball bearing), waterproof The digital 2075R High-Speed Metal Gear Servo features a waterproof case for worr...
View full details
LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness The waterproof LED power supply plugs directly into the accessory tap on ...
View full details
aving spare hardware is a smart choice, this is a replacement LaTrax Rally Screw Set. This set includes the necessary replacement hardware for the ...
View full details
This is the clear body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR.Features: Clear plastic constructionIncludes: Clear 1/16 E-Revo Bo...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One left caster blockOne right caster blockRequires:Installation on SlashTechnical Spe...
View full details
This is the Traxxas 30cc tube of Marine Grease.Features: 1 oz (30cc) tube Roll-up toothpaste-style tube Includes:One 1 oz tube of Traxxas marine ...
View full details
Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3) Blue pipe coupler for use with pipes 5152 and 4452R exh...
View full details
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3) Roller clutch (one-way bearing) includes 6x8x0.5 washer. Fits TR...
View full details
Screws, 2.5x8mm cap-head machine (6) Set of six 2.5x8 mm cap-head machine screws with hex-drive heads Replacement part for these models: 1/16 E-...
View full details
Screws, 3x8mm flat-head machine (hex drive) (6) Set of six 3x8 mm flat-head machine screws with hex-drive heads Replacement part for these models...
View full details
Screws, 4x15mm countersunk machine (hex drive) (6)
Gear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.
Save 13%
MAXX 1/10 Scale MAXX Monster Truck MODEL 89086-4: Maxx 1/10 scale monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio syst...
View full details
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits...
View full details
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1) Keep your receiver antenna wire safe with this black antenna tube and vinyl cap...
View full details
Ball bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Driveshaft assembly, front & rear, 6061-T6 aluminum (blue-anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Pr...
View full details
Slash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Everything to convert your Slash 4X4 Performance-proven by the Slash 4X4 Ultimate and 1/1...
View full details
Rod ends, Revo® (large) with hollow balls (12) Set of twelve large Revo®-style rod ends with hollow balls. Replacement part for these models: 4-...
View full details
Screws, 4x10mm countersunk machine (hex drive) (6)
Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handli...
View full details
Traxxas Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
TRX-4® Deep-Terrain Traxx® Traction Redefined All-terrain Traxx with Deep-Terrain Treads provides the most significant traction upgrade you can ma...
View full details