This is the brand new Traxxas Clear 1/18 Rally Body with Decals for the LaTrax Rally Car.Features: Clear - requires painting Made of lexan Decals ...
View full details
This is the Traxxas pair of White GTR XX-Long Spring Shocks with an Orange Compression Rating, 0.711 (2). These Spring Shocks fit the Traxxas Slash...
View full details
TRA7186 LED lights, light harness (4 clear, 4 red)/ bumpers, front & rear/ wire ties (3) (requires power supply #7286)
Features:Steel constructionRed in color0.82 rate, double orangeIncludes:Two GTR Shock SpringsRequires:Installation on the vehicleSpecifications:Len...
View full details
Traxxas front and rear bumpers for use on the 1/16 E-Revo VXL 4WD RTR. Plastic construction. Black chrome plated.Requires: Installation on the vehicle
This is a set of four Traxxas Molded Composite Push Rods in Green with eight Hollow Balls. Note:Fits the following models:1/16 E-Revo VXL1/16 E-Rev...
View full details
This is the Input and Output Shafts for use on 16th scale Traxxas. Features: Steel construction Black in color Includes: (1) Input Shaft (...
View full details
These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...
View full details
This is the Seal Kit for the Traxxas 1/16 scale Receiver Boxused in the 1/16 scale E-Revo and Slash. Features Prevents moisture and dirt from enter...
View full details
This is a set of four Traxxas Molded Composite Push Rods in Red with eight Hollow Balls for the 1/16 Scale Slash 4WD and E-Revo.
Traxxas pair of SCT Split Spoke Wheels in Red. Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash. Red colored wheel with...
View full details
This is a replacement Sound Output Module Double-Sided Adhesive from Traxxas. Includes: (4) Double Sided Adhesive Rings
This is the Telemetry Expander Mount that fits the 3622 or 3622A Chassis. Includes: (1) Mount
Traxxas Tires/Wheels Assebled Black Chrome Fr XO-1 (2) Features: 118+mph speed rated belted slicks with foam inserts Split spoke plastic wheels wi...
View full details
This is a replacement pair of Traxxas Pre-Mounted Rear Tires and are intended for use with the Traxxas XO-1. The tires come assembled and glued on ...
View full details
This is the front driveshaft for the Traxxas XO-1 on-road car.Features: Hardened steel construction Steel spline, constant-velocity design Includ...
View full details
This is a replacement Traxxas Aluminum Front Shock Tower, and is intended for use with the Traxxas X0-1.
This is a pair of steering blocks for the Traxxas XO-1.Features: Aluminum construction that is anodized and blue in colorIncludes: One each Left an...
View full details
These are Traxxas Tire Wheel Assembled Glued SCT Split-Spoke Chrome.Features: Fits the front and rear of short course trucks Split-spoke beadlock ...
View full details
This is a pair of Assembled Tires and Wheels for the Traxxas SlayerFEATURES:5-spoke satin chrome finish wheels with multi-terrain soft compound tir...
View full details
These are the GTR red shock springs for the Traxxas Slayer.Features: 2.0 lb/in tension Red coating Includes: Two GTR Red Shock Springs for the Tr...
View full details
This is the Upper & Lower Rear Left Suspension Arm Set for the Traxxas Slayer Pro 4WD Short Course Nitro vehicle. Features: Durable nylon c...
View full details
This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5923Part Number: 5923 / TRA5923FitsSlayerSlayer Pro
Traxxas center differential kit for use on the Slayer. From the factory, the differentials are filled with 30K weight silicone diff fluid. This is ...
View full details
This is the optional clear body for the Traxxas Slayer Pro 4x4.Features: Constructed of molded polycarbonate plasticIncludes: Clear Body for the Tr...
View full details
These are Traxxas Tire Wheel Assembled Glue SCT Split-Spoke Black.Features: Fits the rear of 2WD short course trucks and the front and rear of 4WD...
View full details
This is a pair of 2WD Front SCT Split-Spike Dual Profile Wheels with a Satin Chrome Beadlock Style. Features: Dual Profile Satin Chrome Beadloc...
View full details
This is a pack of two Traxxas 2.2/3.0 Pre-Mounted SCT Rear Wheels & Tires. Add instant "beadlock" style to your Slash or Slayer. The beadlock t...
View full details
These are the Traxxas Tires & wheels, assembled, glued (SCT chrome, red beadlock style wheels, BFGoodrich Mud-Terrain T/A KM2 tires, foam inser...
View full details
Traxxas pair of front springs are constructed of white steel. Specs:Length: 59mm (2.3")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56...
View full details
This is the Turn Fin Set for the Traxxas Spartan Race Boat. Turn fins are mounted at the rear of the boat and provide stability when turning, trim ...
View full details
TRA5727X Drive strut (with stainless steel ball bearing)
This is the optional Two Speed Conversion Kit for the Traxxas E-Revo, TRAC07**. **This conversion kit requires a 3-channel transmitter to shift gea...
View full details
This is the battery compartment vent for the Traxxas E-Revo.Features: Nylon construction that is black in color Fits left or right side Includes:...
View full details
This is the Mamba ESC mounting plate from Traxxas.Features: Nylon construction that’s black in colorIncludes: ESC Mounting Plate Two 3x35mm Cap He...
View full details
These are front All-Star chrome front 2.8 wheels for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction Chrome plated Five spoke wh...
View full details
This is a set of rear wheel and tires from Traxxas for use on the Jato.Features: Chrome color twin spoke wheels Alias 2.8 tires pre-mounted and gl...
View full details
This is the Input Shaft and Spacer for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionBlack in color INCLUDES:One Input Shaft (Sl...
View full details
Traxxas engine mount and hardware is constructed of metal and silver in color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x...
View full details
This is the Fuel Tank Rebuild Kitfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Nylon, Rubber and Metal ConstructionBlue, Black, and Silver in C...
View full details
This is the Steering Bellcrank Postfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Metal constructionINCLUDES:Two Bellcrank Steering Posts
Traxxas Tuned Pipe Resonator Jato 3.3. The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the chassis The single-...
View full details
These are the left and right 25 degree aluminum steering blocks for the Traxxas Nitro Jato Stadium Truck.Features: Aluminum construction in natural...
View full details
These are the rear left and right suspension arms for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInclud...
View full details
Traxxas left and right caster and steering blocks are constructed of nylon and black in color INCLUDES: One Left and Right 30 Caster Blocks One Lef...
View full details
This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color Includes: (2) Diffe...
View full details
Suspension Pin Set, Front & Rear: Jato This is the Front and Rear Suspension Pin Set for the Traxxas Jato. Features Constructed of steel, 1/16"...
View full details
