ALL TRAXXAS

Slipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...

Screws, 4x12mm button-head machine (hex drive) (6) Set of six 4x12 mm button-head machine screws with hex-drive heads Replacement part for these ...

Stub axles, rear (2) Set of two replacement rear stub axles Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Lic...

Bulkhead (front) (grey) Gray front bulkhead Replacement part for these models: Bandit® VXL Bandit® Nitro Rustler® Nitro Slash Rustler® VXL Rustl...

Traxxas TRX-4M 3-Channel Brushless SystemNew Brushless Power System for ALL TRX-4M Models- Field-Oriented Control (FOC) for superior low speed torq...

MAXX® POWER 4S LIPO POWER WITH iD CONVENIENCE Battery/Charger Completer Pack The EZ-Peak 2996X 4s Completer Pack delivers ultimate power to yo...

Traxxas Premium Shock Oil (60 wt) Traxxas premium 60 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silico...

Traxxas ID Charger Port for TRX-4M Battery, 2-amp (for charging #2821 2-cell LiPo battery with Traxxas® EZ-Peak® iD chargers) Charge 2821 batteries...

Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...

  High-Torque Waterproof Servo• 80 oz-in torque• Transit time 0.23 sec/60° Replacement part for these models: Bandit® BIGFOOT® No. 1...

Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link The Maxx®-Duty metal-gear steering servo fe...

Wire harness, series battery connection (compatible with Traxxas High Current Connector, NiMH only)

Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2) F...

Housings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...

Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale long GTR shocks represent the...

Traxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...

Battery hold-down plate (grey) / metal posts (2) / body clips (2) Gray battery hold-down with metal posts (2) and retaining clips (2). Replacemen...

XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)

Battery, Power Cell, 1800mAh (NiMH, 6-C flat, 7.2V) Traxxas Power Cell NiMH battery packs provide excellent “punch” at an affordable price. Low-res...

This is a pack of 12 heavy duty body clips for Traxxas vehicles. Features: Black Color Curved End to Ease Removal Includes:(12) Body Clips Body ...

Rebuild kit, oil-filled shocks (o-ring, bladder, piston, shaft guide, E-clips, shock cap, shock rod end) renews 2 shocks Rebuild kit for LaTrax Te...

Steering blocks, left & right Steering blocks, left & right Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...

Velineon 3500 Brushless Motor The Velineon® 3500 kV brushless motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a...

Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount) Lower your Velineon brushless motor’s temperature...

Tires & wheels, assembled, glued (X-Maxx® black wheels, paddle tires, foam inserts) (left & right) (2) X-Maxx® paddle tires offer unbeatab...

This is a replacement LaTrax 3.7V 650mAh 1C LiPo battery pack for use on the La Trax Alias quad-copter. Specifications: Length: 2.08" (53mm) Width:...

Shock tower, front (left & right halves) Front shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®

Traxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...

Screws, 3x20mm button-head machine (hex drive) (6) 3x20 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...

Traxxas X-Maxx HD Steering Block Set - uses TRA5196A 20x32x7 bearing

Traxxas Premium Shock Oil (40 wt) Traxxas premium 40 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicon...

Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the ...

This is a Traxxas 61-Tooth Spur Gear factory replacement for the 1/18 scale LaTrax Desert PreRunner and LaTrax Teton. Includes: 1 61 tooth spur gear

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...

Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...

Suspension pin retainer (4) Set of four replacement suspension pin retainers for hardened steel suspension pins. Replacement part for these model...

This is a replacement Traxxas X-Maxx Left Lower Suspension Arm. Features: Factory Replacement Part Nylon Construction Includes:(1) Left Lower Sus...

Driveshaft assembly, front or rear (2) Set of two driveshaft assemblies fit front or rear Replacement part for these models: 1/18 LaTrax® Desert...

Traxxas Slipper Pressure Plate & Hub Alloy Revo Features: Aluminum construction Includes: One slipper pressure plate One slipper hub Part C...

Top drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...

Servo, sub-micro, waterproof The 2065T waterproof sub-micro servo features a metal main gear for precise control and powerful steering authority. ...

2021 Ford Bronco TRX4 Scale and Trail Crawler AN OFF-ROAD LEGEND RETURNS The legend is back. After 25 years, the Bronco has returned as Ford's top-...

This is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...

MODEL SPECS Name: LaTrax® Teton® Type: Monster Truck Skill Level: 1 Scale: 1/18 Weight: 15.2 ounces (430 g) Length: 10.16 inch...

This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...

Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 18-tooth pinion gear (1.0 metric pitch) fits...

Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...