ALL TRAXXAS

This is the replacement battery hold down set for the Traxxas E-Maxx.Features: Black nylon construction Adhesive backed foam strips Fits standard ...

Turnbuckles, aluminum (red-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/ rod ends & hollow balls)/wrench Traxxas’ alu...

Traxxas Seal Kit Rx Box Features: Properly seals receiver box to minimize dirt and moisture exposure Includes: Silicone grease One Gasket Two Fo...

Screws, 2.5x6mm cap-head machine (hex drive) (6) Set of six 2.5x6 mm cap-head machine screws with hex-drive heads Replacement part for these mode...

Screws, 3x15mm washerhead machine (6)

Motor screws (3x8mm washerhead machine) (6)

Spur gear (66-Tooth) (32-Pitch) w/bushing

Heat shield tubing, fiberglass (2) (black)

Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)

Wiring harness, on-board radio system (includes on/off switch and charge jack) (Jato)

Plug Adapter (For TRX Power Charger to charge 7.2V Packs)

EVX-2 Electronic Speed Control (land version, low-voltage detection, fwd/rev)

Shock caps, aluminum (2) (Big Bore Shocks) Replacement aluminum shock caps for Traxxas Big Bore shocks. (2) Caps do not fit Ultra Shocks. Access...

Screws, 3x30mm roundhead machine (6)

Screws, 3x6mm roundhead machine (6)

Screws, 3x6mm countersunk machine (6) (hex drive)

Turnbuckles, aluminum (blue-anodized), toe links, 61mm (2) (assembled with rod ends & hollow balls) (fits Stampede) (requires 5mm aluminum wren...

Slipper tension spring/ spur gear bushing & locknut

Gear, 18-T pinion (48-pitch) / set screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...

Traxxas Tires & wheels, assembled, glued (white wheels, center caps, Terra Groove dual profile tires) (left & right)

Traxxas Heavy-Duty Rubber Pit Mat 13"x19" (33 x 48.3cm)

Traxxas Body, Mini Maxx, ProGraphix (graphics are printed, requires paint & final color application)/ decals (includes front & rear body la...

Traxxas Tires & wheels, assembled (charcoal gray wheels, dual profile (2.1" outer, 2.6" inner), Sledgehammer tires, foam inserts)) (front) (2)

Traxxas Latch, body mount, front & rear (for clipless body mounting) (attaches to #10711 body)

Traxxas Tires & wheels, assembled, glued (3.8" black wheels, belted Sledgehammer® tires, foam inserts) (2)

Rebuild kit for the Velineon 1200XL brushless motor. Includes front and rear plastic endbells, 6x17x6 mm bearings (2), 7x6x12 mm spacer, washers (2...

Differential, rear, complete (fits X-Maxx® 8s or XRT®)The Pro Built® rear differential comes completely assembled and ready to install in your 8s X...

Steering blocks, extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)Ac...

Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade ki...

COMPETITION READY The Slash® Modified dirt oval racer is engineered to deliver competition-tuned track performance right out of the box. Slash...

Traxxas Pro Scale® LED light set, Ford Raptor R (contains front bumper with LED light bar and headlights harness) (fits #10111 series bodies)