TRA10756 Traxxas Spur gear, 47-tooth (0.8 metric pitch)
TRAXXAS
Traxxas Spur gear, 47-tooth (0.8 metric pitch, compatible with 32-pitch)
Traxxas Spur gear, 47-tooth (0.8 metric pitch, compatible with 32-pitch)
Traxxas Gear set, differential (planetary) (output gears (2), spider gears (4), spider gear shafts (4), differential spacers (2), output shaft (1),...
View full details
Full-Throttle, Non-Stop Fun The all-new 4s Disruptor? is the one boat that holds nothing back. The fun begins when you pin the throttle and D...
View full details
31″ Tandem-Axle Boat TrailerMade for DisruptorTransport your Traxxas Disruptor® to the lake in style with this fully detailed scale replica tandem-...
View full details
1.9″ front hard-compound drift tires provide the perfect combination of durability and breakaway potential for refined drift control on abrasive su...
View full details
Scale And Trail Crawler Introduced in 1969, the Chevrolet® Blazer was General Motors’ two-door entry into the booming sport utility market. Its...
View full details
Save 13%
Scale And Trail Crawler Introduced in 1969, the Chevrolet® Blazer was General Motors’ two-door entry into the booming sport utility market. It...
View full details
PRECISE DRIFTING - POWERED BY TSM MODEL 105237-4: 4-Tec Drift: 1/10 RWD drift car, fully-assembled, waterproof electronics, Ready-To-Race®, w...
View full details
MODEL 36254-8: Fully assembled, waterproof, Ready-To-Race®, with TQ™ 2.4 GHz radio system, XL-5™ electronic speed control, 8.4 V NiMH 3000 mAh ...
View full details
Shock caps for Sledge® GT-Maxx® shocks with spring perches (2) and adjustment collars (2)Replacement part for these models:Sledge®
Save 13%
**** Free battery charger with the purchase of this truck. Please add TRA2827X and TRA2920 to your shopping cart. It will automatically discount th...
View full details
Differential, rear, complete (fits X-Maxx® 8s or XRT®)The Pro Built® rear differential comes completely assembled and ready to install in your 8s X...
View full details
Shocks, GTR xx-long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
Bumper, front (upper (1), lower (1))Replacement part for these models:Slash® Mudboss
Traxxas Pro Scale® LED light set, Ford Raptor R (contains headlights harness) (fits #10111 series bodies)
Traxxas Body conversion kit, 1/18 scale TRX-4MT Bigfoot No. 1 (includes front grille, engine detail & decals) (fits #9812 body)
Traxxas Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw Machined, Hardened Stee
Save 13%
THE RC STADIUM TRUCK REDEFINED MODEL 67376-4: Rustler 4X4 VXL: 1/10 scale 4X4 stadium truck, fully-assembled, waterproof el...
View full details
Save 13%
MODEL 90376-4: Stampede 4X4 VXL: 1/10 scale 4X4 monster truck, fully-assembled, waterproof electronics, Ready-To-Race®, with TQi™ 2.4 GHz 2-cha...
View full details
Traxxas Wire harness, LED lights/ zip ties (8) (fits #10350 boat trailer)
Traxxas Hitch, boat trailer (top & bottom)/ 3x12mm BCS (black stainless) (2)
Traxxas Chassis brace, front, 6061-T6 aluminum (blue-anodized/ 2.5x6mm CCS (with threadlock) (2)
Traxxas Charger, USB-C, 20W (5 - 7 cell, 6.0 - 8.4 volt, NiMH) (with iD)
Traxxas Body, Slash® 4X4, heavy duty (also fits Slash® VXL & Slash® 2WD) (clear, requires painting)/ window masks/ decal sheet (requires #6967 ...
View full details
Traxxas Steering Bellcranks (Left & Right)/ Draglink (6061-T6 Aluminum Red-Anodized) (Fits X-Maxx)
Traxxas Steering Bellcranks (Left & Right)/ Draglink (6061-T6 Aluminum Green-Anodized) (Fits X-Maxx)
Save 13%
MODEL 83124-4: 4-Tec® 2.0 1/10 scale AWD chassis, waterproof and fully-assembled with BL-2s™ brushless power system and TQ™ 2.4 GHz radio system...
View full details
Traxxas Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
Traxxas Body, Ford F-150 Truck (1979), complete, green (includes grille, side mirrors, door handles, roll bar, windshield wipers, side trim, & ...
View full details
Traxxas Housing Differential (Front/Rear) 6061-T6 Aluminum (Blue-Anodized)
Traxxas Cover Gear (Red-Anodized 6061-T6 Aluminum)
Traxxas Hardware Kit XRT (Contains all Hardware used on XRT)
Traxxas Body Conversion Kit Slash 2WD (Includes Front & Rear Body Mounts Latches Hardware) (For Clipless Mounting)
Perfect for 1/10 and 1/8 scale models Thick, weather-resistant nylon fabric Heavy duty zippers and stitching Large outer pockets for tools, parts,...
View full details
LED light bar, assembled with wire harness (fits #9262 roll bar)Add more scale detail to your TRX-4® Chevrolet® K10 or Ford® F-150® by replacing th...
View full details
Traxxas Shock shaft, 72mm (GT-Maxx) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)
Traxxas Body, Stampede 4X4, Prographix (Graphics Are Printed, Requires Paint & Final Color Application)/ Decal Sheet
Traxxas Steering Blocks, Brass (7 Grams) (Left & Right)/ 2.5x12mm BCS (With Threadlock) (2)/ 2x6mm SS (With Threadlock) (4)
Traxxas Spur gear, 46-tooth, steel (1.0 metric pitch)
Traxxas Led Light Set, Complete (Includes Front And Rear Bumpers With Led Light Bar, Rear Led Harness, & Bec Y-Harness) (Fits 4WD Rustler)
Traxxas Led Light Bar, Front (Assembled)/ 3X8 BCS (2)/ 2.5X8 BCS (2) (Requires Front Bumper TRA5835X For 2WD Slash, TRA3635 For 2WD Stampede, TRA36...
View full details
Traxxas LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, BEC Y-harness) Fits 4WD Stampede
Traxxas Skidplate, Chassis (Stainless Steel)
Traxxas Rebuild Kit, Constant-Velocity Driveshaft (Includes Pins For 2 Driveshaft Assemblies) (For Front Driveshafts Or #9751 Metal Center Drivesha...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS