This is a Traxxas LED headlight/tail light kit that is intended for the Traxxas TRX-4 Sport. This kit requires the Traxxas power supply TRA8028. In...
View full details
Body reamer (aluminum handle) A sharp reamer is the best way to make holes in RC car bodies, and the Traxxas reamer is the right tool job right....
View full details
This is a Traxxas Clear/Trimmed Sport Body with Window Masks and Decal Sheet for the TRX-4. Features: Trimmed for your convenience Die-cut for LED...
View full details
This is a set of two Traxxas Unlimited Desert Racer Premounted BFGoodrich Baja KR3 Tires. These are an excellent choice for use on the Unlimited De...
View full details
This is an optional set of Traxxas Maxx Aluminum Caster Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts have ...
View full details
This is an orange WideMaxx suspension kit by Traxxas. Includes Front and rear suspension arms Front toe links Rear shock springs
This is a Traxxas TRX-4 1979 Chevrolet Blazer Grille, intended as a replacement for the part supplied with the TRX-4 Chevrolet Blazer Kit and as ...
View full details
Traxxas TRX-4 Tactical Unit Pre-Painted Body. The Tactical Unit’s lightweight night-camo body lowers the overall center of gravity (CG) of the truc...
View full details
Traxxas Body, X-Maxx, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)
Traxxas Motor, Velineon 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx)
This is the Traxxas pair of White GTR XX-Long Spring Shocks with an Pink Compression Rating, 0.884 (2). These Spring Shocks fit the Traxxas Slash 4...
View full details
Body, Bandit, Rock n' Roll (painted, decals applied)
This is a pair of Traxxas pre-assembled rims and tires, the 3.8" 6 spoke wheels have a 17mm splined hex and the Talon EXT tires are pre-glued to th...
View full details
This is a pack of four replacement Traxxas 17mm Unlimited Desert Racer Disc Brake Wheel Hub Hexes. These hexes are splined but are still compatible...
View full details
This is a replacement part for the Traxxas Unlimited Desert Racer. Features:Factory Replacement Part Includes:(2) Trailing Arms
Yokes, transmission (2)/ 4x15mm screw pins (2) Pair of replacement transmission yokes with 4x15 mm screw pins (2) Replacement part for these mode...
View full details
This is a replacement Traxxas E-Revo 2.0 Stub Axle. Features:Factory Replacement Part Includes:(1) Stub Axle
Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8 BCS (5)/ 2.5x8 CS (2) Sealed receiver box for Traxxas micro receivers. Include...
View full details
This is the Traxxas Ford Mustang, painted in black, with decals applied. This is a replacement body for the Traxxas Mustang GT # TRA83044-4 or a gr...
View full details
This is the Foam Body Bumper for the Traxxas 4-Tec 2.0 AWD and Ford GT. Features: Durable Foam Construction Black in Color Includes: (1) B...
View full details
Axle shaft, front (left)/ drive pin/ cross pin Front left steel axle shaft includes drive pin and cross pin Replacement part for these models: T...
View full details
This is the 24-Tooth High Range Metal Output Gear for the Traxxas TRX-4. and TRX-6 Features: Metal in Construction Includes: (1) Output Ge...
View full details
Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) ...
View full details
This is a replacement Traxxas TRX-4 Land Rover Defender Front and Rear Inner Fender Brace Set.
Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel) Pair of steel 12 mm hex wheel hubs with axle pins (2) Replacement part for these models: TR...
View full details
Ball bearings, black rubber sealed (7x14x5mm) (2) Pair of 7x14x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Traxxas middle drive belt is a direct fit replacement part. This belt only works with the Nitro 4-Tec, not the electric version. Includes: One midd...
View full details
Screws, 3x25mm countersunk machine (hex drive) (6)
This is the Replacement Black Plastic Chassis for the Traxxas E-Maxx Truck.FEATURES:Black plastic constructionINCLUDES:One chassisREQUIRES:Complete...
View full details
This is a replacement Pink Rear Bumper and Mount for the 2WD Traxxas Slash. Features: Nylon construction Pink in color Includes: (1) Rear ...
View full details
This is the Traxxas Clockwise Motor with a High Output Red Connector for the Latrax Alias Quadcopter.Features: Color of connector indicates rotati...
View full details
This is a set of Traxxas GTX Assembled Shocks without springs. Constructed from aluminum with an anodize finish, these heavy duty shocks are availa...
View full details
This is a pair of Traxxas Nerf Bars.Features: Molded composite plastic construction Fastens to each side of the chassis to help reduce damage from...
View full details
This is a pair of Latrax SCT tires and wheels.Features: Plastic five spoke wheels that is orange in color Dual profile wheel design All terrain ti...
View full details
This is an optional LaTrax Oil Filled Shock Set. These shocks feature the ability to hold oil for improved performance. This allows the user to tun...
View full details
This is a replacement LaTrax Aluminum Center Driveshaft. This package also includes one driveshaft pin. Features: Aluminum Construction Light Wei...
View full details
This is a replacement LaTrax Camber Links & Toe Link Set. Package includes six links that can be used in the front or rear camber link position...
View full details
This is a pair of differential lockers from Traxxas. Ensure that your wheels are all turning at the same speed to prevent unnecessary wheelspin whe...
View full details
This is the Power Supply for the LED Light Kitfor the 1/16 scale Traxxas Summit.FEATURES:3V, 0.5 amp power outputINCLUDES:Power Supply with Traxxas...
View full details
This is an optional Traxxas GTR Shock Spring Set, and is intended for use with the Traxxas 1/16 Summit, 1/16 Slash, 1/16 E-Revo and 1/16 Grave Digg...
View full details
These are the front and rear differential cover plates for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that’...
View full details
Traxxas optional toe links for use on the 1/16 Slash Vehicles. Constructed of anodized red aluminum. Traxxas aluminum toe links are manufactured fr...
View full details
Ideal for extra-high-power brushless setups, this solid-aluminum motor mount is extremely rigid for total power transfer. And extremely stylish, wi...
View full details
