ALL TRAXXAS

High-Intensity Maxx Slash LED Light Kit Built Maxx® Tough! Maxx Slash redefines speed, durability and toughness with its innovative design and mass...

Driveshafts, rear, extreme heavy duty, steel-spline constant-velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)E...

BACK WITH A VENGEANCE Stampede® 4X4 VXL is bigger and stronger than ever before! Backed by the massive torque of the Velineon® 540XL motor, Sta...

Traxxas Skidplate, front (1), rear (1)

Traxxas U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4))...

Traxxas Body, Slash VXL 2WD (also fits Slash 4X4), Fox Edition (painted, decals applied) (assembled with front & rear latches for clipless moun...

XRT® started a revolution by combining X-Maxx® strength with race truck handling. The new 2024 Limited Edition XRT Ultimate is outfitted with ove...

Traxxas Hardware Kit X-Maxx (Contains all Hardware used on X-Maxx)

Traxxas Hardware Kit Stainless Steel X-Maxx (Contains all Stainless Steel Hardware used on X-Maxx)

Traxxas Long Arm Lift Kit, Trx-4M, Complete

Traxxas Steering Blocks, Left & Right/ Caster Blocks (C-Hubs), Left & Right/ 20x32x7mm Bearings (2)/ 15x24x5mm Bearings (2)

HIGH TRAIL ADVENTURE Traxxas High Trail Edition™ TRX-4 models are the biggest and baddest trucks on the trail and now classic Blazer fans ha...

Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 25-tooth pinion gear (1.0 metric pitch) fits...

Traxxas Skidplate, Chassis, Blue (Fits Sledge)

Traxxas Gear Set, Transmission, High Range (Trail) (16.6:1 Reduction Ratio)/ Pinion Gear, 11-Tooth

Traxxas Skidplate, Center/ Bumper Mount, Front/ Bumper Mount, Rear

Traxxas Tires & Wheels, Assembled, Glued (XRT Race Black Wheels, Sledgehammer Tires, Foam Inserts) (Left & Right)

Traxxas Tires & Wheels, Assembled, Glued (XRT Race Black Wheels, Gravix Tires, Foam Inserts) (Left & Right)

Traxxas Axle Housing, Front & Rear

Traxxas Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4 Long Arm Lift Kit)

TRA9595 Traxxas Sway bar kit, Sledge (front and rear) (includes front and rear sway bars and linkage)

TRA7774A Traxxas Sledgehammer Tires on Black Chrome Wheels for X-Maxx (2)

This is a front or rear suspension screw pin set hardened steel by Traxxas. Includes Four 4x18mm pins Two 4x38mm pins Two 4x33mm pins Two 4x43mm p...

Traxxas Skidplate, center/ 4x20 CCS (4)/ 3x10 CS (4) (fits Maxx V2 with extended chassis (352mm wheelbase))

Traxxas Gear set, metal (for 2080X micro waterproof servo)

Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 18-tooth (32-pitch) pinion gear is mach...

The Traxxas Rustler 4X4 Body Reinforcement Set provides added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strengt...

This is a replacement Traxxas GT-Maxx Rebuild Kit, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Includes lower cartridge, pisto...

Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2) Steering bellcranks with support, se...

Replacement part for these models: Maxx¶© TRA3463 Traxxas Cooling fan kit (with shroud), Velineon 540XL motor

The Traxxas Aluminum Steering Block Set is CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, R...

Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and ...

The Traxxas TRX-4 Machined Overdrive Ring & Pinion Gear is a heavy duty gear upgrade for your TRX-4 build. This ring and pinion gear set is ov...

This is an optional set of Traxxas Maxx Aluminum Caster Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts have ...

This is a pack of two optional Traxxas Front Heavy Duty Machined Axle Shafts for use with the TRX4 series. These heavy duty axle shafts are used in...

Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8111 or #8112 body) Replica side mirrors and snorkel for the 8111 and 8112 TRX...

Body, Rustler Rock n' Roll (painted, decals applied)

Bumper, front/ bumper support Replacement front bumper with bumper support Replacement part for these models: Rustler® 4X4 Brushless Rustler® 4X...

Input shaft, transmission (cush drive) Transmission (Cush Drive) input shaft Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ul...

This is a replacement Traxxas E-Revo VXL 2.0 Roof Skid Plate, with four included 3x12mm Cap Head screws.  Features: Factory Replacement Part Nylon...

This is a replacement Traxxas Differential Gear Set, including four spider gears and two spider gear shafts. Includes:(4) Spider Gears(2) Spider Ge...

This is a replacement Traxxas E-Revo 2.0 Driveshaft Rebuild Kit. This kit includes two barrels and two pins, enough parts to service two driveshaft...

LED lightbar (Rigid), TRX-4® (requires #8028 power supply) The Rigid® LED light bar kit adds more candlepower to your TRX-4® Land Rover® Defende...

Servo horn, steering Standard steering servo horn

This is a replacement differential ring and pinion gear set for the Traxxas TRX-4.  Package contains one ring gear and one pinion gear.  Features:F...

Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters) The GTS shock rebuild kit includes the ...

Output gear, 51-tooth, metal (requires #7785X input gear) Metal 51-tooth output gear. Requires 7785X metal input gear. Replacement part for thes...