ALL TRAXXAS

These are plastic washers from Traxxas. This will work of the Nitro Rustler.Features: Plastic washersIncludes: Ten WashersRequires: Traxxas Nitro R...

This is a set of two replacement stub axle carriers from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axl...

This is a replacement Traxxas ESC/Receiver Mounting Plate, intended for use with the installation of the Traxxas XL-5 or XL-10 Electronic Speed Con...

Screws, 3x10mm countersunk machine (6)

Turnbuckles (62mm) (front tie rods) (2) Pair of 62 mm turnbuckles (front tie rods) Replacement part for these models: Bigfoot® Officially Licens...

Screws, 4x15mm button-head machine (hex drive) (6)

Screws, 4x20mm button-head machine (hex drive) (6)

Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3) 3x12 mm cap-head machine screws with hex drive heads. Set of six. Repl...

Screws, 3x23mm roundhead machine (6)

Suspension arms (front) (2) Standard front suspension arms Replacement part for these models: Bandit® VXL Bandit® Drag Slash 1967 Chevrolet® C10...

TRA58434-4 BLACK Slash 2WD Brushless Traxxas Slash® has defined short course RC racing for a generation. Now there’s a new Slash with even more pow...

This is a replacement set of two Traxxas Maxx Gear Covers, intended for use with the Maxx 1/10 Brushless Monster Truck.

Traxxas Differential assembly (bevel gear), front or rear, complete/ pinion gear, differential (12/47 ratio) (front (1), rear (1)) (fits Mini Maxx®)

Traxxas Tires & wheels, assembled (charcoal gray wheels, dual profile (2.1" outer, 2.6" inner), Gravix® tires, foam inserts) (rear) (left &...

Traxxas Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof

Traxxas Shocks, GTR long, green-anodized, PTFE-coated bodies with TiN shafts (assembled with springs) (4)

High-Intensity Maxx Slash LED Light Kit Built Maxx® Tough! Maxx Slash redefines speed, durability and toughness with its innovative design and mass...

Driveshafts, rear, extreme heavy duty, steel-spline constant-velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)E...

BACK WITH A VENGEANCE Stampede® 4X4 VXL is bigger and stronger than ever before! Backed by the massive torque of the Velineon® 540XL motor, Sta...

Traxxas Skidplate, front (1), rear (1)

Traxxas U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4))...

XRT® started a revolution by combining X-Maxx® strength with race truck handling. The new 2024 Limited Edition XRT Ultimate is outfitted with ove...

Traxxas Hardware Kit X-Maxx (Contains all Hardware used on X-Maxx)

Traxxas Hardware Kit Stainless Steel X-Maxx (Contains all Stainless Steel Hardware used on X-Maxx)

Traxxas Hardware Kit Stainless Steel Hoss 4X4 VXL/Slash 4X4/Stampede 4X4/Rustler 4X4 (Contains all Stainless Steel Hardware used on Hoss 4X4 VXL, S...

Traxxas Push Bar, Bumper, Chrome (Assembled) (Fits #9836 Bumper)

Traxxas Long Arm Lift Kit, Trx-4M, Complete

Traxxas Driveshafts, Center, Assembled (Front & Rear) (Fits 1/18 Scale Vehicles With Long Wheelbase)

Perfect for 1/10 and 1/8 scale models Thick, weather-resistant nylon fabric Heavy duty zippers and stitching Large outer pockets for tools, parts,...

Traxxas Steering Blocks, Left & Right/ Caster Blocks (C-Hubs), Left & Right/ 20x32x7mm Bearings (2)/ 15x24x5mm Bearings (2)

Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 25-tooth pinion gear (1.0 metric pitch) fits...

Traxxas Skidplate, Chassis, Blue (Fits Sledge)

Traxxas Gear adapter, fixed

Traxxas Differential Cover, Front Or Rear (Red) (2)

Traxxas Gear Set, Transmission, High Range (Trail) (16.6:1 Reduction Ratio)/ Pinion Gear, 11-Tooth

Traxxas Shock Mounts (Front & Rear)/ Battery Tray 

Traxxas Tires & Wheels, Assembled, Glued (XRT Race Black Wheels, Gravix Tires, Foam Inserts) (Left & Right)

Traxxas Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4 Long Arm Lift Kit)

TRA9595 Traxxas Sway bar kit, Sledge (front and rear) (includes front and rear sway bars and linkage)

TRA7774A Traxxas Sledgehammer Tires on Black Chrome Wheels for X-Maxx (2)

This is a front or rear suspension screw pin set hardened steel by Traxxas. Includes Four 4x18mm pins Two 4x38mm pins Two 4x33mm pins Two 4x43mm p...

Traxxas Skidplate, center/ 4x20 CCS (4)/ 3x10 CS (4) (fits Maxx V2 with extended chassis (352mm wheelbase))

Traxxas Gear set, metal (for 2080X micro waterproof servo)

The Traxxas Rustler 4X4 Body Reinforcement Set provides added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strengt...