ALL TRAXXAS

This is an optional Traxxas GT-Maxx Shock Springs, intended for use with the Maxx 1/10 Monster Truck. These springs have a 1.725 rate and a natural...

Traxxas Body support, rear/ 3x10mm CS (4) (fits 8918 series Maxx V2 bodies for 352mm wheelbase)

Traxxas Body Accessories Kit, 2017 Ford Raptor (Includes Grill, Hood Insert, Side Mirrors, & Mounting Hardware)

This is the Data Link Telemetry Expander from Traxxas that connects #6550X Telemetry Expander 2.0 to the #6590 High-Voltage Power Amplifier. In...

Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 18-tooth (32-pitch) pinion gear is mach...

Traxxas Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)

This is a replacement Traxxas GT-Maxx Rebuild Kit, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Includes lower cartridge, pisto...

This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for  for 2WD Slash, Stampede, and R...

This is the Blue Anodized Aluminum Motor Mount from Traxxas that is an accessory part for the Ford Fiesta ST Rally, Rustler 4X4, and Slash 4X4. ...

This is an optional set of Traxxas Maxx Aluminum Steering Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts hav...

This is the Traxxas Rustler 4x4 VXL Green Pre-Painted and Assembled Body with Front & Rear Body Mounts, Body Support, and Window, Grill & L...

Traxxas Body, E-Revo, Black/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless moun...

Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm green-anodized aluminum wheel hubs combine high-profi...

M3x27mm Bhcs Button Head Cap Screws (6)

This is a replacement Traxxas E-Revo VXL 2.0 Roof Skid Plate, with four included 3x12mm Cap Head screws.  Features: Factory Replacement Part Nylon...

Spur gear, 55-tooth Replacement part for these models:4-Tec 2.0 VXL AWD Chassis

Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters) The GTS shock rebuild kit includes the ...

This is a pack of two replacement Traxxas 4-Tec 2.0 1.9" Response X-Tra Wide Rear Tires Pre-Assembled on Black Chrome Split-Spoke Wheels. These whe...

These are the Traxxas 4-Tec 2.0 Left and Right Stub Axle Carriers. These fit all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Fi...

This is a set of Traxxas Orange Rotor Blades for the LaTrax Alias Quadcopter.Features: Orange colored Made of plastic Built to be felxible and wit...

Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061...

This is the Front and Rear Motor Mounts for the Traxxas X-Maxx Monster Truck. Features: Two-piece molded composite plastic construction Attache...

This is a set of four Traxxas GTR Hard Anodized Shocks with Springs for the LaTrax Teton. These aluminum shocks are rugged and will give you superi...

This is a pair of optional Tires and 12 Spoke Wheels for the1/18 scale Latrax Rally Car from Traxxas.FEATURES:Polished spokes with black chrome fin...

This is a replacement LaTrax Front & Rear Body Mount Set. Package includes the plastic front and rear body mount components.  Features: Factor...

This is the front and rear bumper set for the Traxxas Summit VXL.Features: Black nylon construction and is direct replacement partsIncludes: Front...

These are the SCT right and left off-road tires and wheels for use on the Traxxas 1/16 Slash VXL 4WD RTR. Features: Assembled and glued SCT satin ...

This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...

This is the optional aluminum front shock tower for the Traxxas Slash 4x4.Features: 7075-T6 blue anodized aluminum constructionIncludes: Aluminum F...

Features:Hardened plastic constructionBlack in colorIncludes:One rear shock towerRequires:Installation on chassisTechnical Specifications:Length: 8...

This is the replacement Traxxas Rear Ring and Pinion Gear for the Stampede 4x4. This set features a 12 tooth pinion and 47 tooth ring gear, and is ...

This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...

This is the chassis for the Traxxas E-Revo 4WD Monster Truck RTR.Features: Nylon construction that’s grey in color Installed foam pads Also fits t...

This is the Traxxas Anodized Aluminum Antenna Crimp Nut. This Antenna Crimp Nut is red colored and compatible with the Traxxas Slash 4x4, Stampede ...

Traxxas flat, open-end 5mm wrench for the Revo. Traxxas flat, open-end 5mm wrench for the Revo is constructed of aluminum. with blue anodization. E...

This is a set of two replacement half shaft drive assemblies for the Traxxas Revo monster truck. These drive shafts are used for the front and rear...

This is a replacement opti-drive sensor assembly for the Traxxas Revo monster truck. This is the sensor that attaches to the transmission and deter...

This is the front and rear differential housing for the Revo from Traxxas.Features: Durable black nylon constructionIncludes: One diff housing (2 p...

The Revo©-Spec Torque-Control slipper clutch upgrade kit fits T-Maxx¶© Classic, S-Maxx, and SportMaxx trucks equipped with the original T-Maxx styl...

Toe link, 5.0mm steel (front or rear) (2) Pair of steel toe links fit front or rear. Rod ends sold separately. Replacement part for these models:...

TRA5245X Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2)

TRA5150 E-clips, 1.5mm (24)

Traxxas stock replacement differential gear set for the T-Maxx. Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be r...

TRA4935 Bumpers, satin finished (front&rear)

Traxxas left and right rear bulkheads for the T-Maxx 3.3 fastens to rear skidplate and holds rear diff in place. Constructed of hardened plastic IN...

This is a pair of ball bearings by Traxxas. Ball Bearings help to reduce friction on your vehicle.Features: Stainless steel construction that’s sil...

Features: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32

This is the optional single motor plate for the Traxxas E-Maxx 16.8V RTR.Features: Aluminum construction that is blue in color Designed for a clea...