TRA8944 Traxxas Skidplate, front (1), rear (1)
TRAXXAS
Traxxas Maxx Front/Rear Skidplate Set. Package includes replacement front and rear skidplates. Replacement part for these models: Maxx®
Traxxas Maxx Front/Rear Skidplate Set. Package includes replacement front and rear skidplates. Replacement part for these models: Maxx®
The Traxxas Telemetry 2.0 Expander & 2.0 GPS Module Combo requires the TQi radio system with Wireless Module (TRA6511), TSM receiver (TRA6533),...
View full details
Shaft, GTX shock TiN-coated (2) (assembled with rod ends and steel hollow balls) Pair of 110 mm titanium-nitride coated long GTX shock shafts. TiN...
View full details
Traxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Traxxas 7635 LaTrax Bumper Front & Rear TetonThese are the Front and Rear Bumpers for the LaTrax Teton Monster Truck from Traxxas.FEATURESPlast...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
Traxxas Propeller Shaft/Flex Cable DCB M41Features:Steel constructionTransfers power from the motor to the propeller Includes:Propeller Shaft/Flex ...
View full details
These are the optional 17mm splined wheel hubs for the T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Aluminum construction that’s blue anodized...
View full details
Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic) Skid plate set includes front and rear skid plates. Replacement pa...
View full details
Traxxas EZ start system is a simple push-button starting for glow plug and starter motor. LED status for both glow plug and starter motor All-in-on...
View full details
Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6) Set of six 3x15 mm cap-head machine screws with hex-drive heads and w...
View full details
Screws, 3x10mm cap-head machine (6) (no washer)
Screws, 3x6mm cap-head machine (hex drive) (6)
Screws, 3x8mm countersunk machine (6) (hex drive) 3x8 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
Gear, 19-T pinion (48-pitch) / set screw 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
High-Performance Electric RC Boat Blast delivers speed, fun, and quality with a feature list you might not expect from such an affordable boat. B...
View full details
Traxxas Wire Harness, Led Lights (Fits #9862 Roll Bar)
Outfitted for Adventure Even the toughest off-road challenges have met their match with TRX-4® Sport High Trail™ Edition. A factory-instal...
View full details
ULTIMATE RC HAULER ULTIMATE RC HAULER Based on the hugely capable TRX-6® platform, the TRX-6 Ultimate RC Hauler is the biggest, baddest rig in t...
View full details
Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch) 46-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power hand...
View full details
Traxxas Spinning carousel rack (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils)
Gear set, metal (for 2070, 2075 servos) Replacement high-torque metal gear set for 2075X servo. Gears may also be used to upgrade 2070, 2075, and ...
View full details
This is a set of eight Traxxas Heavy Duty Toe Link Rod Ends with pre-installed hollow balls ready for installation on the E-Revo VXL Brushless.
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) 50-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS