ALL TRAXXAS

This is the inner driveshaft assembly for the VXL from Traxxas.Features: Plastic constructionIncludes: Inner Shaft assembly and M2x8 Screw PinRequi...

This is the ProGraphix body for the Traxxas Stampede 4x4 VXL.Features: Black, silver, gray and carbon fiber painted graphics Pretrimmed Includes:...

Lower chassis, low CG (black) Change up the color on your low-CG-equipped 2WD Slash with this accessory lower chassis. Does not fit standard chass...

This is a package of water cooling tubing for the Traxxas Spartan.Features: Silicone construction that is blue in colorIncludes: One 3' length of f...

This is the Traxxas Y-Harness, Servo and LED Light Set.Features: Black and red colored Made of durable material Includes:One Traxxas Y-Harness, S...

These are the tall front and rear body mount posts for use on the Traxxas Summit Truck.Features: Nylon construction this is black in colorIncludes:...

This is a set of optional Traxxas black chrome front and rear bumpers for the Revo series.Features: Plastic construction that is black chrome in co...

Ball bearings, blue rubber shield (5x10x4mm) (2) Pair of 5x10x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...

6x10x12 Roller Clutch One-way starter bearing for the TRX® Pro.15 nitro engine Replacement part for these models: TRX® Pro .15

Fuel line (1 foot)

Screws, 3x25mm button-head machine (hex drive) (6)

Screws, 3x15mm roundhead machine (6)

Turnbuckles, 78mm (2) Replacement 78 mm metal turnbuckles. Rod ends sold separately. Replacement part for these models: BIGFOOT® No. 1 Officiall...

Set (grub) screws, 3x4mm (8)/ 4x4mm (stainless) (4) Grub screw set includes eight 3x4 mm screws and four 4x4 mm stainless screws. Replacement par...

Traxxas Slipper Clutch Rebuild Kit

Traxxas Wheelie bar (assembled)

TRX-4M Trailer Light Kit The Trailer Light Kit adds working brake and reverse lights to the TRX-4M™ utility trailer. Give your trailer and extra do...

Traxxas Pro Scale LED Light Set, TRX-4 Chevrolet Blazer (1969 & 1972), Complete With Power Module (Contains Headlights, Tail Lights, Side Marke...

Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw The 20-tooth pinion gear (1.0 metric pitch) is machine...

Traxxas Ball Bearing Set, Black Rubber Sealed, Complete (3x6x2.5mm (8), 5x8x2.5mm (4), 4x8x3mm (4), 8x12x3.5mm (2), 3.5x7x2.5mm (4))

Traxxas Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx V2 with extended chassis (352mm wheelbase))

Shock shafts, hardened steel, titanium nitride coated (long) (2) These hardened steel shafts have a super tough titanium nitride coating with a mi...

MODEL SPECS Name: Jato® 3.3 Type: Nitro Stadium Truck Speed: 65+ mph Skill Level: 5 Scale: 1/10 Weight: 5.18 pounds (2.35 kg) ...

Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth steel spur gear (32-pitch) fits the...

Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...

TRA3945X 15 Tooth Heavy Duty Pinion Gear 32 Pitch Accessory part for these models: E-MaxxE-RevoSlash 4X4 UltimateSlash 4X4Stampede 4X4 VXLStampede ...

Replacement part for these models:Bandit VXL

Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (...

Body, Bigfoot  No. 1, Officially Licensed replica (painted, decals applied)

LED expedition rack scene light kit (fits #8111 or 8213 series bodies, requires #8028 power supply) TRX-4® Sport LED Scene Lights attach directly ...

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty front out...

Wheel hubs, hex, steel (4) Steel hex wheel hubs fit with greater precision and deliver slip-proof performance with their splined-hex design. Sold ...

All-Star black chrome wheels, paddle tires, foam inserts,electric rear (2) TSM rated.

This is a replacement Traxxas 39 Tooth TRX-4 Spur Gear.

This is a set of replacement Traxxas Caster Blocks intended for the 4-Tec 2.0. Features:Nylon/Plastic Construction Includes: (2) Caster Blocks (4)...

This is the Traxxas X-Maxx Replacement Center Skidplate.Features Molded composite plastic construction Reduces damage to underside of chassis and ...

Features:Aluminum constructionAnodized red in colorIncludes:Four Toe LinksEight Hollow BallsOne 5mm WrenchRequires:Installation on the vehicleTechn...

These are the front and rear toe links for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that is red in colorIncludes: F...

This is the Traxxas Gear, 29-T pinion (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft)/ set screw. This is Traxxas part number 6492Part Num...

Traxxas TRA5853X 17mm wheels hubs set is constructed of anodized blue aluminum.This is the new Traxxas 17mm wheel hub kit for the Traxxas Slash, St...

Skidplates, front & rear (black) Black front and rear skid plates Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor ...

Seal, stuffing tube (1)/ push rod (1) Stuffing tube seal and push rod hull seal Replacement part for these models: DCB M41 Widebody Spartan® S...

Traxxas ProGraphix Custom bodies are painted with the same hot, clean graphics as our regular ProGraphix bodies, however the overall color is left ...

This is the aluminum exhaust header spring mount for the Traxxas 2.5, 2.5R and 3.3 Engines.Features: Aluminum construction that’s silver in color ...

Traxxas updated stock replacement fuel tank is made of clear, nylon construction. Black fuel tank cap (spring loaded). This fuel tank is unique to ...

Nuts, 5mm nylon locking (8) Replacement part for these models: Jato® Nitro Rustler® Revo® Slayer® Pro 4X4 T-Maxx®

This is a 4x14mm Button Head Screw Set for the Traxxas Revo vehicle. Features Steel constructionBlack in colorLow-profile, button-head designHex dr...

BIG BOYS Hoodie RED