This is the Traxxas set of four Hard Anodized GTR Shocks for the 1/16th scale.Features: Fully assembled Hard anodized Titanium shock shafts Inclu...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
This is the CV style stub axle for use on the Traxxas Summit Truck RTR.Features: Machined steel construction that’s CV styleIncludes: CV Style Stu...
View full details
Traxxas piston and sleeve with two wrist pin clips for the Traxxas TRX 3.3 engines Traxxas piston and sleeve are made of ABC construction, Aluminum...
View full details
This is the replacement starter shaft for the T-MAXX 2.5 engine.Features: Steel ConstructionIncludes: One shaftRequires: Traxxas 2.5 T-MAXX engineS...
View full details
Traxxas high volume air filter body for the Maxx Trucks. Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber ...
View full details
Air filter housing/ foam insert/ straight base/ angled base/ cable tie (1-each) (TRX® 2.5, 2.5R, 3.3) Air filter housing with foam insert include ...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck. Accessory part for th...
View full details
These are the 3mm x 10mm shoulder screws for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s black in colorIncludes: Six 3...
View full details
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch) 65-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performanc...
View full details
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...
View full details
Screws, 3x15mm flat-head machine (hex drive) (6) Set of six 3x15 mm flat-head machine screws with hex-drive heads Replacement part for these mode...
View full details
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks) Replacement Big ...
View full details
Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias 2.2" tires)
Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...
View full details
Backplate screws (3x8mm cap-head machine) (6)/washers (6)/ wrench
**** Free battery charger with the purchase of this truck. Please add TRA2827X and TRA2920 to your shopping cart. It will automatically discount t...
View full details
Sold out
Traxxas Pro Scale LED Light Set, Front & Rear, Complete (includes light harness, zip ties (6)) (Fits TRA9812 Body)
Sold out
What’s In The Box: Slash 2WD with BL-2s ESC and 3300 kV motor Quick Start Guide TQ™ 2.4 GHz radio system High quality maintenance...
View full details
Traxxas Ball Bearing Kit X-Maxx/XRT (Complete)
Traxxas LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) Fits 2WD Slash
Transmission, complete (low range (crawl) gearing) (40.3:1 reduction ratio) (assembled with ball bearings) (includes Titan® 87T motor) Give your T...
View full details
Charger, iD® Balance, USB (2-cell 7.4 volt LiPo with iD® connector only) Use the 2-amp USB-A fast charger with your Power Cell 2s 2821 LiPo batter...
View full details
RACE-INSPIRED ENGINEERINGEXTREME 8S POWER AND SPEEDX-TRUCK™ SIZE AND STRENGTH The Traxxas XRT fuses race-inspired design and engineering with...
View full details
2021 Ford Bronco TRX4 Scale and Trail Crawler AN OFF-ROAD LEGEND RETURNS The legend is back. After 25 years, the Bronco has returned as Ford's top...
View full details
Ball bearing, black rubber sealed (6x16x5mm) (2) Pair of 6x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a Traxxas color-burst painted body with pre-applied decals for the 1/18 LaTrax Desert PreRunner 4WD racing truck.
Traxxas Power Tap Connector with Cable. Pakcage includes connector, power tap with cable and two 2.6x8mm button head screws. Use TRA6549 power tap...
View full details
This a steel servo horn from Traxxas intended for the Maxx vehicle. Features:Steel Construction Includes:(1) Steel Servo Horn
This is a replacement Traxxas Maxx Outer Stub Axle Assembly, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This part is for fron...
View full details
Gear set, metal (for 2085, 2085X servos) Replacement metal gear set for 2085X servo. Gears can also be used to upgrade 2085 servo. (Must swap all ...
View full details
Traxxas Paddle Tires let you tear up sand, snow - and even water! These paddles are pre-mounted on black wheels that will fit the Unlimited Desert ...
View full details
Videos LaTrax Alias Quad-Rotor Ready-To-Fly Helicopter Quad Rotor Flight Re-imagined,More Powerful, More Durable, More Fun! Alias is a cle...
View full details
Save 13%
Videos LaTrax Alias Quad-Rotor Ready-To-Fly Helicopter 2.4GHz radio system Quad-rotor thrust with auto-leveling 6-axis flight system Four ...
View full details
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Spiral-cut 37-tooth ring and 13-tooth pinion front differential ...
View full details
Ring gear, differential/ pinion gear, differential Differential ring and pinion gears Replacement part for these models: E-Revo® VXL Brushless
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
Carrier, differential (aluminum)/ (requires #7783X spider gear shaft) Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket,...
View full details
The Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set features a design which incorporates latest proprietary composite material. Traxxas...
View full details
This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws.FitsX-Maxx 6SX-Maxx 8S
Bumper mounts, front & rear/ screw pins (4) Replacement front and rear bumper mounts for TRX-4®. Includes screw pins (4). Replacement part fo...
View full details
Screws, 3x30mm cap-head machine (hex drive) (6) 3x30 mm cap-head machine screws with hex drive heads. Set of six.
Features:Steel and aluminum constructionIncludes:Two each; Shafts and Aluminum SpacersFour Gear Pads
Ring gear, differential, 42-tooth (use with #7777, #7778 13-tooth differential pinion gears) 42-tooth differential ring gear. Use with 7777 13-toot...
View full details
This is a set of left and right rear stub axle carriers for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Hold...
View full details