TRA6853A Stub axle assembly, rear, outer, extreme heavy duty (1)
TRAXXAS
Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty rear outer...
View full details
Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty rear outer...
View full details
This is a replacement Traxxas Center Rear Driveshaft for the Unlimited Desert Racer. Â Features: Fully assembled Made from 6061-T6 aluminum Black-...
View full details
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 16-tooth pinion gear (1.0 metric pitch) fi...
View full details
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
This is the Spool Housing, Spool Shaft and Bushing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Features: Molded Composite Housing & Bush...
View full details
This is a replacement Traxxas X-Maxx Steering and Linkage Servo Horn. This steering link comes assembled pivot balls.
These are the Traxxas Premounted Off-Road Monster Truck Tires on 5-Spoke Wheels for the LaTrax Teton Monster Truck.Features: Black colored Plastic...
View full details
This is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full details
This is a optional Traxxas Aluminum Steering Block Set, and is intended for use with the Traxxas Slash 4x4 truck. Precision-machined for total stee...
View full details
This is a pack of two replacement Traxxas Pre-Mounted Robby Gordon Rear Tire & Wheels, and is intended for use with the Traxxas Slash Robby Gor...
View full details
This is the suspension multi-tool for Traxxas Revo. It is used to adjust the Shock Upper Cap, Shock Rod-end removal/install and to tighten/loosen t...
View full details
This is the black wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction that’s black in colorInc...
View full details
This is the upper & lower left front suspension arm set for the REVO from Traxxas.Features: Durable black nylon constructionIncludes: Upper and...
View full details
Suspension arms upper (1)/ suspension arm lower (1) (right front) Upper and lower front right suspension arms Replacement part for these models: ...
View full details
This is a replacement Traxxas Body Mount Set. This set includes the front and rear mount.
Velineon VXL-3m Brushless Power System, waterproof (includes waterproof VXL-3m ESC and Velineon 380 motor)
Turnbuckles, toe link, 55mm (75mm center to center) (2)
Traxxas Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use...
View full details
NOTE: Purchase with Traxxas Power Adapter, AC, USB-C (45W) (for North America)TRA2912
Race-Inspired EngineeringExtreme 8S Power and SpeedX-Truck Size and Strength The Traxxas XRT® fuses race-inspired design and engineering with...
View full details
Traxxas Spring, Shock (GTM) (0.155 Rate) (1 Pair)
Charger, iD® Balance, USB (2-cell 7.4 volt LiPo with iD® connector only) Use the 2-amp USB-A fast charger with your Power Cell 2s 2821 LiPo batter...
View full details
Sold out
Traxxas Hardware Kit, Stainless Steel, Complete (Contains All Stainless Steel Hardware Used On 1/18-Scale Ford Bronco Or Land Rover Defender) (Incl...
View full details
This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for the 1/10 Slash 4x4 vehicles. Accessory Part For1/10 Ford Fiesta ST RallySlash 4x4 Br...
View full details
Traxxas Battery/charger completer pack (includes TRA2969 2-amp NiMH peak detecting AC charger (1), TRA2923X 3000mAh 8.4V 7-cell NiMH battery (1))
High-Torque 330 Blue ServoThe Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features....
View full details
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Spiral-cut 37-tooth ring and 13-tooth pinion front differential ...
View full details
This is a pack of two replacement Traxxas 4-Tec 2.0 1.9" Response Front Tires Pre-Assembled on Black Chrome Split-Spoke Wheels. These wheels featur...
View full details
This is a replacement LaTrax 10 Tooth Pinion Gear, with set screw. This package also includes a small bracket and two mounting screws. Features:Fa...
View full details
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
Bulkhead tie bars, front & rear, aluminum (blue-anodized) Set of front and rear bulkhead tie bars with a brilliant blue anodized finish Repla...
View full details
This is a replacement Traxxas Rear Stub Axle, and is intended for use with the Traxxas Slash 4x4, Slash 4x4 Ultimate, Rally and Slash equipped with...
View full details
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
These are the replacement FWD/REV output gears for the Traxxas Nitro Revo Monster Truck.Features: Nylon construction that’s black and white in colo...
View full details
Traxxas Steel Rocker Arm Post Revo (2) These are the Steel Rocker Arm Posts for the REVO from Traxxas. Features: Black steel construction Include...
View full details
Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Two long and two sho...
View full details
This is the optional heavy-duty servo saver spring for the Traxxas Revo.Features: Steel construction Chrome Plated Conical Shape Includes: One He...
View full details
Hex wheel hubs, steel (2)/ axle pins (2.5x12mm) (2) 14 mm steel wheel hubs provide superior strength and durability and won't round off. Includes ...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11 BB (2) Steering bellcranks with servo saver, servo save...
View full details
This is a replacement Traxxas Long Wheelbase Chassis. Even at maximum speed, E-Maxx feels stable and controlled thanks to its extra-long 335mm whee...
View full details
Steering blocks (l&r) Replacement left and right steering blocks Replacement part for these models: Bandit®
NEW X-Maxx Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme ...
View full details
Traxxas Tires & wheels, assembled, glued (X-Maxx® black wheels, Sledgehammer® belted tires, dual profile (4.3" outer, 5.7" inner), foam inserts...
View full details
Sold out
High Torque: 650 oz-in 78% more torque than stock 2085 High Speed: 0.13 sec/60° 30% faster than stock 2085 All metal gears with steel output gea...
View full details
Traxxas Blast 24" High Performance RTR Race Boat - Orange MODELÂ 38104-8:Â Blast: 1/10 scale race boat with waterproof electronics. Fully-assembled...
View full details
Traxxas Led Light Set, Sledge, Complete (Includes Body Bumper With Led Lights, Roof Skid Plate With Led Lights, #6590 High-Voltage Power Amplifier)
Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) is machined from hardened steel...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS