TRA1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
TRAXXAS
Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
Save 13%
MAXX 1/10 Scale MAXX Monster Truck MODEL 89086-4: Maxx 1/10 scale monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system...
View full details
Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the p...
View full details
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW Differential carrier includes X-ring gaskets (2), ring gear gasket, and...
View full details
This is the optional clear body for the Traxxas X-Maxx Monster Truck.Features: Molded from clear polycarbonate plastic Allows X-Maxx drivers to cr...
View full details
Spur gear, 55-tooth 55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
These are the 4x16mm Button Head Machine Screws from Traxxas.Features: For use in the Traxxas Revo and also anywhere a screw this size is required...
View full details
Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxx...
View full details
Screws, 3x10mm cap-head machine (6) (no washer)
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Set of replacement rod ends with 16 long ends and 4 short ends. Inc...
View full details
LIFTED OFF-ROAD ADVENTURE Traxxas elevates scale adventure with the lifted TRX-4® Chevrolet® K10 High Trail Edition. Thanks to its factory-install...
View full details
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
Gear set, metal (for 2070, 2075 servos) Replacement high-torque metal gear set for 2075X servo. Gears may also be used to upgrade 2070, 2075, and ...
View full details
¶ MODEL 44054-1: Nitro Slash: 1/10 scale 2WD nitro short course truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system with T...
View full details
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full details
Traxxas Rustler 4X4 Rear Bumper. Package includes replacement rear bumper and mount components. Features:Factory Replacement Bumper Components Incl...
View full details
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
Spur gear, 45-tooth (32-pitch) 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
This is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full details
PLATE, MOTOR Replacement blue aluminum motor plate Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Sla...
View full details
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full details
This is the Traxxas auto-detectable temperature sensor.Features: Only for use with the Traxxas Telemetry ExpanderIncludes: Auto-Detectable Temperat...
View full details
These are the optional 17mm splined wheel hubs for the T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Aluminum construction that’s blue anodized...
View full details
Traxxas EZ start system is a simple push-button starting for glow plug and starter motor. LED status for both glow plug and starter motor All-in-on...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
This is a 4x10mm button head screw set for the Traxxas Revo vehicle.Features: Steel construction that’s black in color Low-profile, button-head de...
View full details
Camber link set (plastic / non-adjustable ) ( front & rear) (gray) Non-adjustable gray composite camber link set includes front and rear links...
View full details
Screws, 3x18 button-head machine (hex drive) (6) 3x18 mm button-head machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
Screws, 3x8mm countersunk machine (6) (hex drive) 3x8 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
MODEL 71054-8: Fully assembled, Ready-To-Race®, with TQ™ 2.4 GHz radio system, Titan® 12T 550 motor, XL-2.5™ electronic speed control, 7.2 volt...
View full details
Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch) 46-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power hand...
View full details
Rustler 4X4 LED Light Kit Built Traxxas Tough™The Traxxas Rustler® 4X4 takes stadium truck performance to new heights. The all-new High-Output Off...
View full details
MODEL 59076-3: Slayer Pro 4X4: 1/10 scale 4WD nitro short course truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system with ...
View full details
Sold out
TAKE THE PATH LESS TRAVELED The Traxxas TRX-4 Scale and Trail Crawler is an all-new Traxxas design that is loaded with innovation that instan...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS