TRA6448 Spur gear, 50-tooth (1.0 metric pitch)
TRAXXAS
Spur gear, 50-tooth (1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
Spur gear, 50-tooth (1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
Features: Clear molded polycarbonate construction Trimmed out wheel arches and body post holes Includes: Latrax Teton Clear Body with Decal Sheet...
View full details
Differential kit, center (complete) The optional center differential transfers power to the front and rear differentials independently for smooth ...
View full details
These are the short half shafts for use on the Traxxas Summit Truck RTR.Features: Plastic construction that’s black in colorIncludes: Two Short Hal...
View full details
Screws, 3x23mm button-head machine (hex drive) (6) 3x23 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Traxxas Tires, Mickey Thompson Baja Pro X 2.2x1.0" (2)
Carriers, stub axle (left & right) (requires 20x32x7 ball bearings) Left and right stub axle carriers. Required 20x32x7 bearings. Replacemen...
View full details
Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish) (2) Pair of replacement 110 mm steel shock shafts wit...
View full details
This is a replacement LaTrax Camber and Toe Link Set. This set includes four camber links and two toe links. Features:Factory Replacement Camber an...
View full details
Traxxas 48 Pitch Spur Gears are available in 45, 50 or 55 tooth count options to fine tune the gear ratio of your model. Fits: Traxxas 1/16 E-Revo...
View full details
This is the input shaft for use on the Traxxas Slash 4x4 vehicles.Features: Steel construction that is black in colorIncludes: Input Shaft Bearing...
View full details
This is the optional clear gear cover for use on the Traxxas Slash 4x4.Features: Plastic construction that is clear in colorIncludes: One Clear Gea...
View full details
Springs, rear (progressive, +20% rate, blue) (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over smal...
View full details
This is the front bulkhead for the Traxxas Slash 4x4.Features: Composite plastic construction that is black in color Fastens to front of chassis a...
View full details
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
These are the optional axle carriers left and right for use on the Traxxas Revo series.Features: Nylon construction that’s black in color Allows f...
View full details
Traxxas updated wire harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Extra...
View full details
This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full details
Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2) Red aluminum 30° caster blocks improve the a...
View full details
Suspension arms (front) (2) Black front suspension arms (L&R) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica ...
View full details
Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
Save 13%
MAXX 1/10 Scale MAXX Monster Truck MODEL 89086-4: Maxx 1/10 scale monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system...
View full details
Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the p...
View full details
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW Differential carrier includes X-ring gaskets (2), ring gear gasket, and...
View full details
This is the optional clear body for the Traxxas X-Maxx Monster Truck.Features: Molded from clear polycarbonate plastic Allows X-Maxx drivers to cr...
View full details
Spur gear, 55-tooth 55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
These are the 4x16mm Button Head Machine Screws from Traxxas.Features: For use in the Traxxas Revo and also anywhere a screw this size is required...
View full details
Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxx...
View full details
Screws, 3x10mm cap-head machine (6) (no washer)
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Set of replacement rod ends with 16 long ends and 4 short ends. Inc...
View full details
LIFTED OFF-ROAD ADVENTURE Traxxas elevates scale adventure with the lifted TRX-4® Chevrolet® K10 High Trail Edition. Thanks to its factory-install...
View full details
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
Gear set, metal (for 2070, 2075 servos) Replacement high-torque metal gear set for 2075X servo. Gears may also be used to upgrade 2070, 2075, and ...
View full details
¶ MODEL 44054-1: Nitro Slash: 1/10 scale 2WD nitro short course truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system with T...
View full details
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full details
Traxxas Rustler 4X4 Rear Bumper. Package includes replacement rear bumper and mount components. Features:Factory Replacement Bumper Components Incl...
View full details
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
Spur gear, 45-tooth (32-pitch) 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
This is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full details
PLATE, MOTOR Replacement blue aluminum motor plate Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Sla...
View full details
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full details
This is the Traxxas auto-detectable temperature sensor.Features: Only for use with the Traxxas Telemetry ExpanderIncludes: Auto-Detectable Temperat...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS