ALL TRAXXAS

Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handli...

Traxxas Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)

TRA5042 Traxxas Oil, differential (1M weight) (standard)

Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1) Keep your receiver antenna wire safe with this black antenna tube and vinyl cap...

LiPo Cell Voltage Checker/Balancer (2968X)The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included bal...

Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C flat, 8.4V) Traxxas premium 5000-series Power Cell NiMH battery packs provide the highest capa...

1400mah 11.1v 3-Cell 25C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top spee...

Ball bearings, blue rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...

aving spare hardware is a smart choice, this is a replacement LaTrax Rally Screw Set. This set includes the necessary replacement hardware for the ...

This is the clear body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR.Features: Clear plastic constructionIncludes: Clear 1/16 E-Revo Bo...

Motor coupler, collet style/ GS 4x3 (with threadlock) (1)/ Wrench, 10mm (2) Collet-style motor coupler with 4x3 stainless grub screw with applied ...

Screws, 2.5x12mm cap-head machine (6) Set of six 2.5x12 mm cap-head machine screws with hex-drive heads Replacement part for these models: 1/16 ...

Wiring harness for RX Power Pack, Traxxas® nitro vehicles except Revo® (includes on/off switch and charge jack) This custom wiring harness simplif...

Set (grub) screws, 3mm hardened (12)

Screws, 4x10mm countersunk machine (hex drive) (6)

Traxxas 1000mAh 2S 7.4V 20C LiPo Battery (fits TRX-4M)

4000mah 11.1v 3-Cell 25C LiPo Battery Traxxas Certified iD®-equipped LiPo batteries provide the punch and on-demand power to reach the top spee...

This is a pair of Traxxas pre-assembled rims and tires, the 3.8" 6 spoke wheels have a 17mm splined hex and the Talon EXT tires are pre-glued to th...

This is a Traxxas front and rear Skidplate.Features: Molded composite plastic construction and reduces damage to underside of chassis and other com...

Driveshaft assembly, front & rear, 6061-T6 aluminum (blue-anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Pr...

Slash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Everything to convert your Slash 4X4 Performance-proven by the Slash 4X4 Ultimate and 1/1...

Rod ends, Revo® (large) with hollow balls (12) Set of twelve large Revo®-style rod ends with hollow balls. Replacement part for these models: 4-...

Traxxas tune pipe coupler and exhaust deflector set for the Revo. Allows for a connection between the Exhaust Header and the Tune Pipe. Silicone co...

Screws, 2.5x8mm cap-head machine (6) Set of six 2.5x8 mm cap-head machine screws with hex-drive heads Replacement part for these models: 1/16 E-...

Screws, 4x15mm countersunk machine (hex drive) (6)

Gear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.

Roll bar (assembled with LED lights)/ mounts (front (2), rear (left & right))/ 2.6x12mm BCS (self-tapping) (4) (fits #9212 or 9230 series bodi...

Nuts, 4mm nylon locking (10) Set of ten 4 mm Nylon locking nuts Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially...

A New Maxx Legacy Begins The Traxxas X-Maxx® is a giant that forever changed the face of RC monster trucks. Its radical cutting-edge design, ma...

This is the Traxxas Transmission Cush Drive Elastomer Damper for the Traxxas X-Maxx. This system requires the Cush Input Shaft (TRA7786X). Includes...

Servo horn, steering, metal/ 3x14 BCS (1) Replacement steel servo horn for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1...

Sensor, RPM (long)/ 3x4mm BCS (1)/ 3x4 GS (1) The RPM sensor plugs directly into your TQi™ receiver to provide real-time speed and RPM data while ...

Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R) Heavy-d...

Mount, tie bar, front (1)/ rear (1) Front and rear tie bar mounts Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®

IF NOT IN STOCK  REORDER  RPM73162 OR  RPM73165 OR RPM73164 OR RPM73169     These are the left and right axle carriers for use on the Traxxas 1/16 ...

These are the pivot balls and pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Steel constructed pivot balls wit...