EFL14025 Ultra Stick 1.1m ARF

The E-flite^® Ultra Stick 1.1m is an updated, upgraded, and more refined version of the iconic Mini Ultra Stick that's a perfect first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots!A

• Inspired by the iconic Mini Ultra Stick with modern-day technologies, features, and performance for “mild to wild” capabilities
• One-piece wing with a fully-symmetrical airfoil that’s quick and easy to install/remove with a single thumbscrew
• Steerable tailwheel plus large tires for the ability to take off from/land on a variety of surfaces, including grass
• Strong and stiff – yet lightweight and long-lasting – built-up wood construction
• Fast and easy bolt-together assembly – no glue, tape, or special tools required

In The Box

• (1) E-flite® Ultra Stick 1.1m
• (1) Product Manual

Needed to Complete

• (1) Full-range 4+ Channel Transmitter and Receiver
• (4 or 6) Sub Micro Servos
• (1) 250–500 watt Capable Motor and ESC
• (1) 3S 11.1V or 4S 14.8V 2200–3200mAh LiPo
• (1) Compatible LiPo Charger

Introduction

The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) model that became an instant best-seller when it was released in 2005. It was available for more than a decade and is still iconic to this day because it went together as easily and in as little time as foam PNP models, yet offered the advantages of lightweight, stiff, and strong wood construction that delivered flight performance unlike similar class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an updated and upgraded version that is slightly larger to offer even better flight performance with extremely popular and common 3S or 4S 2200–3200mAh batteries. It's available in an ARF version that bolts together and is ready for installation of your preferred power system and electronics, or in a BNF Basic version that's equipped with four factory-installed servos, a Spektrum Avian Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies. Both versions are ready to accept two additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, as well as optional wheel pants to look even more like the larger Hangar 9 Ultra Stick models the design is based on. That design offers excellent low-speed characteristics for easier landings, incredible high-speed handling, and impressive aerobatic capabilities that intermediate to experienced pilots will appreciate and enjoy!

Features

• Inspired by the iconic Mini Ultra Stick with modern-day technologies, features, and performance for "mild to wild" capabilities
• A great first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots
• Popular and affordable 2200–3200mAh batteries deliver a wide range of performance and flight times
• Larger control surfaces for added control and sport to mild 3D aerobatic capabilities
• Fast and easy bolt-together assembly – no glue, tape, or special tools required
• The option to add two more wing servos to utilize crow and/or flaps plus full-span ailerons/flaperons/spoilerons
• One-piece wing with a fully-symmetrical airfoil that's quick and easy to install/remove with a single thumbscrew
• Steerable tailwheel plus large tires for the ability to take off from/land on a variety of surfaces, including grass
• Strong and stiff – yet lightweight and long-lasting – built-up wood construction

Overview

The E-flite Ultra Stick 1.1m is based on the design of larger Hangar 9 Ultra Stick models and was inspired by the iconic Mini Ultra Stick. In 2005 the Mini Ultra Stick became an all-time top-seller as E-flite's first-ever "wood" PNP and ARF model that bolted together so it could be assembled as easily and in as little time as foam PNP models. It also offered the benefits that strong, stiff and lightweight, built-up wood construction offered – which delivered flight performance unlike molded foam models. The Ultra Stick 1.1m is an updated, upgraded, and more refined version of the Mini Ultra Stick. The balsa and lite-ply airframe is still lightweight yet features stiffer tail surfaces – that install quickly and easily with just two locknuts – and a stronger mounting area for the main gear installed with four bolts. The one-piece wing is easy to install and remove thanks to the single thumbscrew, plus it's set up to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Basic version is equipped with four factory-installed metal-geared servos, a 3S and 4S compatible Spektrum motor, and an exclusive Avian 45-amp Smart Lite ESC that can provide a variety of real-time power system telemetry data with Smart and non-Smart batteries via compatible Spektrum AirWare^™ equipped transmitters. It's also equipped with an AR631 receiver to provide fly-by range and real-time telemetry data, including battery voltage, current, ESC temps, and more — plus motor reversing for special ground handling and other capabilities — along with the benefits of AS3X^® and optional-use SAFE^® Select technologies. Or, the ARF (Almost-Ready-To-Fly) version is ready for installation of your preferred electronics and power system! And because it's based on the design of larger Hangar 9 Ultra Stick models, it offers the same great low-speed flight characteristics that make for easier landings, along with excellent high-speed handling and outstanding basic to mild 3D aerobatic capabilities. You can even install the optional wheel pants (sold separately) to make it look more like larger Ultra Stick models! This makes it a perfect first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots.

Almost-Ready-To-Fly Flexibility

This Almost-Ready-To-Fly (ARF) version arrives mostly factory-assembled and ready to install the motor, ESC, servos, and receiver you prefer (all sold separately).

Wood Airframe

The balsa and lite-ply airframe is lightweight yet stiff and strong, offering a flying experience you can't get with molded foam models! Best of all, it arrives mostly factory-assembled, and the BNF Basic version also includes durable, factory-installed metal-geared servos and linkages. And in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement/spare parts is readily available.

Uniquely Capable

The iconic Mini Ultra Stick inspired the Ultra Stick 1.1m. And because it's based on the design of larger Hangar 9 Ultra Stick models, it offers the same excellent low-speed flight characteristics that make for easier landings, along with excellent high-speed handling and amazing basic to mild 3D aerobatic capabilities. This makes it a perfect first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots. Plus, it's set up to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!

Easy Assembly

The BNF Basic version Ultra Stick 1.1m arrives mostly factory-assembled with the power system, servos, and receiver installed. The ARF version is also mostly factory-assembled, so all you need to do is finish some quick and easy final bolt-together assembly – without glue, tape, or special tools – and you'll be ready to fly in less time compared to almost all other wood models!

roduct Specifications