TRA8289 Drive hub, 2-speed
TRAXXAS
Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage Replacement drive hub, shift dog, and shift fork for TRX-4® high/low 2-speed transmissi...
View full details
Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage Replacement drive hub, shift dog, and shift fork for TRX-4® high/low 2-speed transmissi...
View full details
This is a set of two optional Pink Aluminum Stub Axle Carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms,...
View full details
These are the Traxxas Assembled Glued Slick Tires and 12-Spoke Blue Wheels for the LaTrax Rally Car.Features: Black and Blue colored Premounted sl...
View full details
This is the Traxxas pair of White GTR Long Spring Shocks with an Orange Compression Rating, 0.623 (2). These Spring Shocks fit the Traxxas Slash 4x...
View full details
This is the gray Nylon chassis for the 2WD Traxxas Slash.Features: Gray composite nylon constructionIncludes: One chassis for the Traxxas SlashRequ...
View full details
These are the Front and Rear Blue Aluminum Bulkhead Tie Barsfor the REVO from Traxxas.FEATURES:Blue anodixed aluminum (2.5mm thick)INCLUDES:One fro...
View full details
This is a replacement fuel tank for the Traxxas Nitro Rustler Stadium truck kitFeatures:Clear plastic, flip-top style tank for glow fuel only.Nippl...
View full details
Turnbuckles, aluminum (red-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/ rod ends & hollow balls)/wrench Traxxas’ alu...
View full details
Wiring harness, on-board radio system (includes on/off switch and charge jack) (Jato)
EVX-2 Electronic Speed Control (land version, low-voltage detection, fwd/rev)
This is a Traxxas LED headlight/tail light kit that is intended for the Traxxas TRX-4 Sport. This kit requires the Traxxas power supply TRA8028. In...
View full details
This is a pair of optional GTR Factory Spec Front Shock Springs for the Traxxas Jato Nitro Stadium Truck. These springs are Green Rate (1.1) and fe...
View full details
Traxxas 5325R Servo Mount Throttle 4x10mm BCS (2) Revo Nitro Slayer This is the 4x10mm BCS Throttle Servo Mount from Traxxas.Features: Nylon const...
View full details
This is an optional Traxxas Slash 2WD LCG Chassis. This grey chassis will allow you to personalize the look of your Traxxas Slash 2wd, Raptor, or R...
View full details
Traxxas Slash 4X4 Ultimate Chassis. This replacement chassis is intended for the Traxxas Slash 4X4 Ultimate. Package includes one chassis.
Traxxas Blazer Led light set (contains headlights, tail lights, side marker lights, distribution block (fits #8130 body, requires #8028 power supply)
These are the Aluminum Front Wheel Spacersfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Aluminum ConstructionSilver in ColorINCLUDES:Four Alumi...
View full details
This is a set of two Traxxas Progressive Rate Rear Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjust...
View full details
This is the Chassis for the Traxxas RTR Funny Car, TRAD69**.FEATURES:Constructed of plastic with black chrome finishINCLUDES:Left and Right Chassis...
View full details
Traxxas 32 Pitch pinion gear. These gears are compatible with a variety of Traxxas vehicles and are available in a variety of tooth count options t...
View full details
Traxxas electronics box for the Traxxas Slayer Pro 4WD Short Course Nitro RTR. These parts attach directly to the chassis. Constructed of black pla...
View full details
This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X) ...
View full details
This is the Traxxas Air Filter Body with Hardware included for the Nitro Slash.Features: Black and pink colored Made of plastic and foam Replaces ...
View full details
Modified U-joints specific to the Villain EX. Not for use with original Villain, Nitro Vee, or Blast.
These are the optional tubes lightweight aluminum turnbuckles for the Traxxas T-Maxx.Features: 30% lighter than stock steel toe links Four times s...
View full details
TRA7793 Housing, Cush Drive (front & rear halves)
This is a set of hex wrenches from Traxxas.Features: Black steel constructionIncludes: 1.5mm Hex Wrench 2mm Hex Wrench 2.5mm Hex Wrench 2.5mm Ball...
View full details
This is a Traxxas Heavy-Duty Fox Body with Decals for the Ford F-150 Raptor.
Traxxas battery box replaces damaged battery boxes. Constructed of gray plastic. This battery box mounts to the chassis and protects the battery pa...
View full details
Traxxas E-Revo 2.0 Heavy Duty Push Rod Rod Ends. These are replacements for E-Revo 2.0 models equipped with TRA8619, TRA8619G, TRA8619R or TRA8619X...
View full details
This is a Traxxas TRX-4 Rear Bumper, intended for use as an optional accessory part for Traxxas TRX-4 1979 Chevrolet Blazer and a replacement for t...
View full details
Traxxas Front & Rear Skid Plate Set (Green) (Grave Digger)
This is a pair of Shock Springs for theLaTrax Teton Monster Truck from Traxxas, TRAD76**.FEATURES:Steel construction, black in colorFits front and ...
View full details
This is the replacement input shaft and drive gear assembly for the Traxxas E-Maxx Truck.Features: Steel shaft that’s black in color Steel drive g...
View full details
TRA9517G Traxxas Wing/ wing washer (green)
Traxxas Body, Maxx V2, blue (painted, decals applied) (fits Maxx V2 with extended chassis (352mm wheelbase))
This is a wheelie bar with Mount for the Traxxas Drag Slash Features: Plastic Included: (1) Wheelie Bar with Mount
This is a pair of Traxxas Steel front Constant Velocity Driveshafts, much stronger and smoother than stock, makes a great upgrade for the Ford GT, ...
View full details
Traxxas TRX-4 Pre-Mounted Canyon Trail 1.9 Crawler Tires. These are premounted on black TRX-4 Wheels. The 1.9 Canyon Trail S1 compound tires and tu...
View full details
TRA7560X Shocks, aluminum (blue-anodized)(assembled with springs) (4)
Traxxas 7537X LaTrax Rally Aluminum 6061 Shock Towers Front / RearThis is the Front and Rear Aluminum Shock Towers for the for the Latrax Rally Car...
View full details
This is the optional aluminum motor mount plate for the Traxxas Slash 4x4.Features: 6061-T6 aluminum construction that’s anodized blue in colorIncl...
View full details
This is the Traxxas Rear Heavy Duty Driveshaft Assembly for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and st...
View full details
This is the clear driveshaft cover for the Traxxas Stampede 4x4.Features: Constructed of clear plasticIncludes: One rear shaft coverRequires: Insta...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS