TRA2381X Main diff with steel ring gear/ side cover plate/ screws
TRAXXAS
Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede, Rustler)
Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede, Rustler)
This is a pair of Traxxas Maxx tires and wheels.Features: Fits the 1/10 scale Traxxas E-Maxx, T-Maxx and Revo Wheels constructed of plastic, split...
View full details
Traxxas Flat Wrench 8mm Blue Revo Features: Aluminum Construction Blue anodization Etched "Traxxas" and "8mm" logos Drilled hole on one end of ea...
View full details
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
This is a set of two Traxxas Window Nets intended for the Unlimited Desert Racer. Note: Pictures are for illustrative purposes only, no vehicles ar...
View full details
WHEEL HUBS, HEX (4) Set of four 12 mm hex wheel hubs Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton®
This is a replacement wing for the Traxxas Rustler 4x4. Features: Factory Replacement Part Available in: Black, White, Green, Blue, Orange, and Re...
View full details
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Red Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped with...
View full details
Accessory part for these models: Rustler©Bandit VXLBanditFord F-150 RaptorNitro SlashRustler© VXLSlash 2WD Unassembled KitSlash VXLSlash
Traxxas Body, Maxx V2 (clear, requires painting)/ window masks/ decal sheet (fits Maxx V2 with extended chassis (352mm wheelbase))
Revo 3.3 powered by stock TRX© 3.3 Racing EngineEight-Time Winner: RC Pro Series 2004-2009, ROAR 2006-2007 Extreme Power!Fueled by Passion.Where ...
View full details
Push bar, bumper (chrome) (fits #8069 bumper) Give your truck a rugged new look with this chrome bumper push bar. Fits 8069-series front bumper. ...
View full details
Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks) Pair of GTX shock caps with spring perches (2), adjustment rings (2)...
View full details
Traxxas Brake Pad Set Revo Features: Aluminum construction with fiber pads pre-glued Inlcudes: Two brake pads Fits: Traxxas Revo Traxxas T-Max...
View full details
Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks improve...
View full details
This is the Traxxas steering servo cover plate for the Traxxas Revo 3.3.Features: Nylon construction that is black in colorIncludes: One Steering S...
View full details
This is the Data Link Telemetry Expander from Traxxas that connects #6550X Telemetry Expander 2.0 to the #6590 High-Voltage Power Amplifier. In...
View full details
Traxxas Drag Slash Rear Pre-Mounted Tires with Weld Wheels and 12mm Hex. These ultra-wide Mickey Thompson ET Drag Slicks feature an innovative carc...
View full details
This is a replacement Traxxas Variable Damping Kit, intended for use with the GTR shocks. This kit includes twelve shock pistons and four flat meta...
View full details
This is a pair of optional Tires and 12 Spoke Wheels for the1/18 scale Latrax Rally Car from Traxxas.FEATURES:Polished spokes with black chrome fin...
View full details
Traxxas 49mm Aluminum Camber Link Turnbuckles make it easy to add strength and adjustability to 4X4 Traxxas models. These turnbuckles come in a f...
View full details
New Spartan SR with Self Righting NEW Self-Righting Flood Chamber NEW Sealed Clipless Hatch NEW Centralized Battery Positi...
View full details
This is the Blue Anodized Aluminum Motor Mount from Traxxas that is an accessory part for the Ford Fiesta ST Rally, Rustler 4X4, and Slash 4X4. ...
View full details
Traxxas flat, open-end 5mm wrench for the Revo. Traxxas flat, open-end 5mm wrench for the Revo is constructed of aluminum. with blue anodization. E...
View full details
This is the front and rear bumper set for the Traxxas Summit VXL.Features: Black nylon construction and is direct replacement partsIncludes: Front...
View full details
This is a replacement LaTrax Front & Rear Body Mount Set. Package includes the plastic front and rear body mount components. Features: Factor...
View full details
This is the Traxxas Anodized Aluminum Antenna Crimp Nut. This Antenna Crimp Nut is red colored and compatible with the Traxxas Slash 4x4, Stampede ...
View full details
Ball bearings, blue rubber sealed (6x10x3mm) (2) Pair of 6x10x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
This is the Traxxas Rustler 4x4 VXL Green Pre-Painted and Assembled Body with Front & Rear Body Mounts, Body Support, and Window, Grill & L...
View full details
Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061...
View full details
TRA5245X Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2)
This is the Traxxas Single Speed Conversion Kit. This Conversion Kit is compatible with the Traxxas T-Maxx 2.5 Nitro 4WD RTR.Features: All major c...
View full details
Screws, 4x15mm button-head machine (hex drive) (6)
Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm green-anodized aluminum wheel hubs combine high-profi...
View full details
These are the 61mm front turnbuckles for the Traxxas Nitro Jato Stadium Truck.Features: Metal and nylon construction that’s black and silver in co...
View full details
Power and Style with A New Look New Colors Available Now! Extreme Power and Speed The DCB M41 Widebody catamaran, designed by DCB (Dave’s...
View full details
This new, light weight, silver anodized machined aluminum flywheel is 40mm in diameter, perfect for using a starter box with the Revo & Slayer....
View full details
Output gear, 51-tooth, metal (requires #7785X input gear) Metal 51-tooth output gear. Requires 7785X metal input gear. Replacement part for thes...
View full details
These are the hollow balls for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black in colorIncludes: T...
View full details
This is a Traxxas Body X-Maxx ProGraphix Body Decal Sheet. Add some style to your Traxxas X-Maxx with this ProGraphix body and decal sheet. The gra...
View full details
This is a 4.9 Silver (light) rate shock spring for the Traxxas Revo.Features: Steel construction Painted red with small silver stripe 4.9 tension ...
View full details
This is an optional set of Traxxas Maxx Aluminum Caster Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts have ...
View full details
The Traxxas Rustler 4X4 Body Reinforcement Set provides added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strengt...
View full details
LED lightbar (Rigid), TRX-4® (requires #8028 power supply) The Rigid® LED light bar kit adds more candlepower to your TRX-4® Land Rover® Defende...
View full details
The Traxxas TRX-4 Machined Overdrive Ring & Pinion Gear is a heavy duty gear upgrade for your TRX-4 build. This ring and pinion gear set is ov...
View full details
TRA7774A Traxxas Sledgehammer Tires on Black Chrome Wheels for X-Maxx (2)
This is the Traxxas set of Aluminum Anodized Front/Rear Bulkhead Tie Bars. These Front/Rear Bulkhead Tie Bars are red colored and compatible with t...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS