This is a set of replacement Traxxas Caster Blocks intended for the 4-Tec 2.0. Features:Nylon/Plastic Construction Includes: (2) Caster Blocks (4)...
View full details
Camber link set for Bandit (grey) (plastic/ non-adjustable)
Body, LaTrax® Desert PreRunner (clear, requires painting)/ decals From mild to wild, Traxxas clear bodies are your own personal canvas. You choos...
View full details
Replacement part for these models:Bandit VXL
This is the rocker arm set progressive 2 (90-T) for the REVO from Traxxas.Features: Durable gray nylon constructionIncludes: An eight piece Rocker...
View full details
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Green Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped wi...
View full details
Traxxas cooling head gasket measures 0.30mm stock thickness head gasket, use thicker gasket for fuels with high nitro content and thinner gasket fo...
View full details
Cover, gear/ motor wire hold-down clip Replacement gear cover with motor wire hold-down clip Replacement part for these models: Ford® F-150® Rap...
View full details
TRA3945X 15 Tooth Heavy Duty Pinion Gear 32 Pitch Accessory part for these models: E-MaxxE-RevoSlash 4X4 UltimateSlash 4X4Stampede 4X4 VXLStampede ...
View full details
Bulkheads (l & r) (front) (grey) Left and right front bulkhead halves Replacement part for these models: T-Maxx®
Traxxas pair of aluminum bellcrank posts for the T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. These bellcrank posts hold the steering bellcr...
View full details
Traxxas Set (Grub) Screws, 3x25mm (8)/ 3mm Nylon Locknuts (8)
This is a pack of four replacement Traxxas 4-Tec 2.0 Shock Caps. These caps feature installed eyelets.
This Skid Plate Set is a replacement part for The Traxxas E-Revo VXL and fits #8629 and #8630 Bulkheads. Features:Factory Replacement Skid Plate Se...
View full details
This is a replacement Traxxas Half Shaft Joint Re-Build kit, intended for use with the Traxxas Summit Monster Truck. This kit contains the hardware...
View full details
This is a set of four Traxxas Y-Spoke chrome mounted Pro-Trax on-road tires and wheels. They come with superb pre-glued racing tires with contoured...
View full details
Traxxas E-Revo 2.0 Tubes 5.0mm Toe Links feature a hybrid design that combines steel threaded inserts, inside a 7075-T6 aluminum shaft. This config...
View full details
Servo case/gaskets (for 2056 and 2075 waterproof servos)
This is a pack of two replacement Traxxas 4-Tec 2.0 Steering Blocks. Features:Factory Replacement Part Includes:(2) Steering Blocks
Traxxas Rubber Tires Wheelie Bar Wheels (2) Features: Constructed of rubber, black in color with with "TRAXXAS" written in white on the sidewalls ...
View full details
This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES: Spring constructed of steel INCLUDE...
View full details
This is a Traxxas TRX-4 Two Speed Conversion Kit. This is a replacement part for any TRX-4 equipped with a 2 speed transmission, as well as an opti...
View full details
Traxxas Hoss LED Light Set with Power Supply. This optional complete LED light kit allows you to add lights to the front and rear of your Traxxas ...
View full details
This is an optional Traxxas Aluminum Drag Link, intended for use with Traxxas Slash 4x4, Rustler 4x4 and Stampede 4x4 models. This machined alumin...
View full details
This is a replacement Traxxas Low-CG Chassis, and is intended for use with the Traxxas 1/10 Rally Racer and the Slash 4x4 Ultimate 1/10 scale short...
View full details
Traxxas pair of driveshafts, outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime U-joint pins are held capt...
View full details
CHASSIS, LOW CG (BLACK) Change up the color on your low-CG-equipped 2WD Slash with this black chassis. Low-CG chassis do not fit standard 2WD Slas...
View full details
Air filter (complete with rubber base & foam insert) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® ...
View full details
This is a pair of 5.9 rate (blue) shock springs for the Traxxas Revo.Features: Metal construction that’s red in color (small blue square indicates ...
View full details
Traxxas optional red aluminum pushrods for the rocker arms for the REVO. These go between the Rocker Arms and the Lower Suspension Arms. **Must be ...
View full details
Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4) Set of four 17 mm orange-anodized aluminum wheel hubs combine high-...
View full details
These are the Black and Silver Pivot Balls for the Latrax Rally, SST and Teton Vehicles. Features:Black and Silver Pivot Balls Includes: (6) Black...
View full details
This is the Traxxas TQi 2.4GHz 2-Channel Radio System. This TQi transmitter is compatible with the Traxxas Link Wireless Module (sold separately - ...
View full details
These are the optional pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Hard anodized aluminum Replaces stock p...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
